A critical review addressing conventional twist drilling mechanisms and quality of CFRP/Ti stacks
出版年份 2023 全文链接
标题
A critical review addressing conventional twist drilling mechanisms and quality of CFRP/Ti stacks
作者
关键词
-
出版物
Journal of Materials Research and Technology-JMR&T
Volume 24, Issue -, Pages 6614-6651
出版商
Elsevier BV
发表日期
2023-04-28
DOI
10.1016/j.jmrt.2023.04.226
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- In-Process Tool Condition Forecasting of Drilling CFRP/Ti Stacks Based on ResNet and LSTM Network
- (2023) Zhenxi Jiang et al. Applied Sciences-Basel
- Drilling study on CFRP/Ti-6Al-4V stacks using chip breaker grooved drill
- (2022) Samsudeensadham S et al. MATERIALS AND MANUFACTURING PROCESSES
- Research on Variable Parameter Drilling Method of Ti-CFRP-Ti Laminated Stacks Based on Real-Time Sensing of Drilling Axial Force
- (2022) Zhengzhu Zhang et al. SENSORS
- The Influence of Cutting Parameters on Plastic Deformation and Chip Compression during the Turning of C45 Medium Carbon Steel and 62SiMnCr4 Tool Steel
- (2022) Marcel Kuruc et al. Materials
- Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies
- (2022) Jinyang Xu et al. COMPOSITE STRUCTURES
- Application of ANN for Analysis of Hole Accuracy and Drilling Temperature When Drilling CFRP/Ti Alloy Stacks
- (2022) Vitalii Kolesnyk et al. Materials
- Multi-Objective Optimization in Single-Shot Drilling of CFRP/Al Stacks Using Customized Twist Drill
- (2022) Muhammad Hafiz Hassan et al. Materials
- Investigating the Effect of Low-Temperature Drilling Process on the Mechanical Behavior of CFRP
- (2022) Hongxiao Wang et al. Polymers
- Research on entrance delamination characteristics and damage suppression strategy in drilling CFRP/Ti6Al4V stacks
- (2022) YuanXiao Li et al. Journal of Manufacturing Processes
- Study on tool deflection compensation method based on cutting force observer for orbital drilling of CFRP/Ti stacks
- (2022) Zemin Pan et al. Journal of Manufacturing Processes
- Experimental investigation on the effect of dry and multi-jet cryogenic cooling on the machinability and hole accuracy of CFRP composites
- (2022) Chetan Agrawal et al. Journal of Materials Research and Technology-JMR&T
- Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects
- (2022) Tao Wu et al. Journal of Composites Science
- A critical review addressing drilling-induced damage of CFRP composites
- (2022) Jinyang Xu et al. COMPOSITE STRUCTURES
- A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions
- (2022) Mehmet Akif Doğan et al. COMPOSITE STRUCTURES
- Investigation of self-adaptive drilling of CFRP/Al stacks based on equivalent impedance recognition of the vibration-assisted device
- (2022) Xin Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Topography characteristics and formation mechanism of the bolt-hole contact interface during the bolt installation of interference-fit composite structure
- (2022) Yu Yang et al. THIN-WALLED STRUCTURES
- An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures
- (2022) Zhefei Sun et al. Journal of Materials Research and Technology-JMR&T
- Comparison of the geometric accuracy of holes made in CFRP/Ti laminate by drilling and helical milling
- (2021) Ben Wang et al. The International Journal of Advanced Manufacturing Technology
- The interface temperature and its influence on surface integrity in ultrasonic-assisted drilling of CFRP/Ti stacks
- (2021) Zhenyu Shao et al. COMPOSITE STRUCTURES
- Influence mechanism of multi-factor on the diameter of the stepped hole in the drilling of CFRP/Ti stacks
- (2021) Zhenchao Qi et al. The International Journal of Advanced Manufacturing Technology
- The impact of tool point angle and interlayer gap width on interface borehole quality in drilling CFRP/titanium stacks
- (2021) Andrea Pardo et al. The International Journal of Advanced Manufacturing Technology
- Wear behavior of special tools in the drilling of CFRP composite laminates
- (2021) Jinyang Xu et al. WEAR
- Between-the-Holes Cryogenic Cooling of the Tool in Hole-Making of Ti-6Al-4V and CFRP
- (2021) Asif Iqbal et al. Materials
- The effect of cryogenic machining of S2 glass fibre composite on the hole form and dimensional tolerances
- (2021) Ugur Koklu et al. The International Journal of Advanced Manufacturing Technology
- New drilling method for damage reduction of CFRP/Ti stacks drilling
- (2021) Ling-yan Tang et al. The International Journal of Advanced Manufacturing Technology
- Study on delamination inhibition and chip breakage mechanism in drilling metal laminated materials with double cone drill
- (2021) Liying Fan et al. Journal of Manufacturing Processes
- The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates
- (2021) Khaled Giasin et al. Journal of Manufacturing Processes
- Drilling of CFRP-Ti6Al4V stacks using CO2-cryogenic cooling
- (2021) A. Rodríguez et al. Journal of Manufacturing Processes
- Effects of drilling strategies for CFRP/Ti stacks on static mechanical property and fatigue behavior of open-hole CFRP laminates
- (2021) Qinglong An et al. Journal of Manufacturing Processes
- A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials
- (2021) Nafiz Yaşar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining performance of PCD drill in low-frequency vibration-assisted drilling of CFRP/Ti6Al4V stack: with special emphasis on the plowing behavior
- (2021) Chaoren Yan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A novel method for predicting delamination of carbon fiber reinforced plastic (CFRP) based on multi-sensor data
- (2021) Jiacheng Cui et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Influence of main cutting edge structure on hole defects in CFRP/titanium alloy stacks drilling
- (2021) Xin-Yi Qiu et al. Journal of Manufacturing Processes
- Effect of Twist Drill Geometry and Drilling Parameters on Hole Quality in Single-Shot Drilling of CFRP/Al7075-T6 Composite Stack
- (2021) Muhammad Hafiz Hassan et al. Journal of Composites Science
- Temperature Study during the Edge Trimming of Carbon Fiber-Reinforced Plastic [0]8/Ti6Al4V Stack Material
- (2021) Arquimedes Castillo-Morales et al. Journal of Composites Science
- Interface mechanical damage mechanism in machining carbon fiber-reinforced plastic/Ti stacks based on a three-dimensional microscopic oblique cutting model
- (2021) Changping Li et al. COMPOSITE STRUCTURES
- A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges
- (2021) Dániel István Poór et al. COMPOSITES PART B-ENGINEERING
- On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method
- (2021) Mohamed Ammar et al. SENSORS
- Numerical Modelling and Analytical Comparison of Delamination during Cryogenic Drilling of CFRP
- (2021) Arunachalam S. S. Balan et al. Polymers
- Research on the manufacture and strength of the innovative joint of FRP machine parts
- (2021) Serhii Nekrasov et al. Journal of Manufacturing Processes
- Delamination and chip breaking mechanism of orthogonal cutting CFRP/Ti6Al4V composite
- (2021) Qiang Fu et al. Journal of Manufacturing Processes
- A mechanistic prediction model for thrust force and torque during drilling of CFRP/Ti stacks
- (2020) Zhen-yuan Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analytical model for delamination of CFRP during drilling of CFRP/metal stacks
- (2020) Zhen-yuan Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of fiber orientation angles on the material removal behavior of CFRP during cutting process by multi-scale characterization
- (2020) Chen Rong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining
- (2020) Maryam Jamshidi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Smart Multi-Sensor Monitoring in Drilling of CFRP/CFRP Composite Material Stacks for Aerospace Assembly Applications
- (2020) Roberto Teti et al. Applied Sciences-Basel
- An analytical model to predict interlayer burr size following drilling of CFRP-metallic stack assemblies
- (2020) Ali Abdelhafeez Hassan et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE® fibre metal laminates
- (2020) K. Giasin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental study of thrust force and surface quality when drilling hybrid stacks
- (2020) Amani Mahdi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanism of reduction of damage during helical milling of titanium/CFRP/aluminium stacks
- (2020) Lei Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the quantitative analysis of drill edge wear when machining CFRP/Ti6Al4V stacks
- (2020) Jinyang Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on the cutting responses of CFRP/Ti stacks: with special emphasis on the effects of drilling sequences
- (2020) Qinglong An et al. COMPOSITE STRUCTURES
- Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions
- (2020) Jinyang Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A thermo-mechanical model of drill margin-borehole surface interface contact conditions in dry drilling of thick CFRP laminates
- (2020) Yiğit Karpat et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation of hole quality in drilled Ti/CFRP/Ti laminates using CO2 laser
- (2020) Dhiraj Kumar et al. OPTICS AND LASER TECHNOLOGY
- Multiple Sensor Monitoring of CFRP Drilling to Define Cutting Parameters Sensitivity on Surface Roughness, Cylindricity and Diameter
- (2020) Miguel Álvarez-Alcón et al. Materials
- Experimental Study of Drilling Temperature, Geometrical Errors and Thermal Expansion of Drill on Hole Accuracy When Drilling CFRP/Ti Alloy Stacks
- (2020) Vitalii Kolesnyk et al. Materials
- A feasible strategy to produce quality holes using temperature-assisted drilling on CFRP
- (2020) K. M. John et al. The International Journal of Advanced Manufacturing Technology
- Experimental analysis on drilling of Al/Ti/CFRP hybrid composites
- (2020) Mete Kayihan et al. MATERIALS AND MANUFACTURING PROCESSES
- A study on the machinability of advanced arc PVD AlCrN-coated tungsten carbide tools in drilling of CFRP/titanium alloy stacks
- (2020) Dave Kim et al. Carbon Letters
- Machinability and surface integrity of adhesively bonded Ti/CFRP/Ti hybrid composite laminates under dry and cryogenic conditions
- (2020) D. Kumar et al. Journal of Manufacturing Processes
- A subjective-objective evaluation method of hole surface quality in drilling CFRP-Ti stacks
- (2020) Shunuan Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Influence of different pretreatments on Ti-6Al-4V surface integrity and scratch-resistance of epoxy coating: Analysis of topography, microstructure, chemistry and wettability
- (2020) Ruslan Melentiev et al. SURFACE & COATINGS TECHNOLOGY
- Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with improved cutting mechanism
- (2020) Liming Shu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Novel chip-breaking structure of step drill for drilling damage reduction on CFRP/Al stack
- (2020) Fu-ji Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of flute number and stepped bit geometry when drilling CFRP/Ti6Al4V stacks
- (2019) Unai Alonso et al. Journal of Manufacturing Processes
- Hybrid Composite-Metal Stack Drilling with Different Minimum Quantity Lubrication Levels
- (2019) J. Fernández-Pérez et al. Materials
- Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks
- (2019) Jinyang Xu et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation on the Interface Damage in Drilling Low-stiffness CFRP/Ti Stacks
- (2019) Bin Luo et al. Chinese Journal of Aeronautics
- Delamination formation, evaluation and suppression during drilling of composite laminates: A review
- (2019) Daxi Geng et al. COMPOSITE STRUCTURES
- A comparison between vibration assisted and conventional drilling of CFRP/Ti6Al4V stacks
- (2019) Jinyang Xu et al. MATERIALS AND MANUFACTURING PROCESSES
- Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling
- (2019) Chao Li et al. WEAR
- Experimental study: comparison of conventional and low-frequency vibration-assisted drilling (LF-VAD) of CFRP/aluminium stacks
- (2019) Lukas Seeholzer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear mechanism in low-frequency vibration–assisted drilling of CFRP/Ti stacks and its individual layer
- (2019) Haojun Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
- (2019) Jinyang Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of machining parameters that affects surface roughness and cutting forces in milling of CFRPs with TiAlN and TiN coated carbide cutting tools
- (2019) Dervis Ozkan et al. Materials Research Express
- Feasibility study on ultrasonic-assisted drilling of CFRP/Ti stacks by single-shot under dry condition
- (2019) Zhenyu Shao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Elimination of delamination and burr formation using high-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material
- (2019) R. Hussein et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks
- (2019) Jinyang Xu et al. MATERIALS AND MANUFACTURING PROCESSES
- Combined effects of various materials on tool wear in drilling of Ti/CFRP stacks
- (2019) Qi Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Investigation on thrust force in rotary ultrasonic drilling of CFRP/aluminum stacks
- (2019) Song Dong et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- On the interpretation of drilling CFRP/Ti6Al4V stacks using the orthogonal cutting method: Chip removal mode and subsurface damage formation
- (2019) Jinyang Xu et al. Journal of Manufacturing Processes
- Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills
- (2019) Jinyang Xu et al. COMPOSITE STRUCTURES
- On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies
- (2019) Jinyang Xu et al. COMPOSITE STRUCTURES
- Comparative tool wear and hole quality investigation in drilling of aerospace grade T800 CFRP using different external cooling lubricants
- (2019) Guoyi Hou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review
- (2019) Muhammad Aamir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wear Mechanisms and Wear Model of Carbide Tools during Dry Drilling of CFRP/TiAl6V4 Stacks
- (2019) Unai Alonso Pinillos et al. Materials
- Analysis of the Machinability of Carbon Fiber Composite Materials in Function of Tool Wear and Cutting Parameters Using the Artificial Neural Network Approach
- (2019) Norberto Feito et al. Materials
- Detection of Tool Wear in Drilling CFRP/TC4 Stacks by Acoustic Emission
- (2019) Sheng Leng et al. Journal of Vibration Engineering & Technologies
- An investigation of the effects of step drill geometry on drilling induced delamination and burr of Ti/CFRP stacks
- (2019) Zhen-yuan Jia et al. COMPOSITE STRUCTURES
- Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates
- (2019) Qinglong An et al. COMPOSITE STRUCTURES
- Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP
- (2019) Daxi Geng et al. COMPOSITES PART B-ENGINEERING
- Design of internal-chip-removal drill for CFRP drilling and study of influencing factors of drilling quality
- (2019) Chengyang Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-margin drill structure for improving hole quality and dimensional consistency in drilling Ti/CFRP stacks
- (2019) Zhen-yuan Jia et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Three-dimensional oblique cutting model for sub-surface damage analysis in CFRP/Ti stack composite machining
- (2018) Zhen-yuan Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of drilling area temperature on drilling of carbon fiber reinforced polymer composites due to temperature-dependent properties
- (2018) Hongxiao Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on the non-coaxiality in the drilling of carbon-fibre-reinforced plastic and aluminium stacks
- (2018) Xiong Liang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A comparison between wet and cryogenic drilling of CFRP/Ti stacks
- (2018) Filomena Impero et al. MATERIALS AND MANUFACTURING PROCESSES
- Prediction of the Tensile Load of Drilled CFRP by Artificial Neural Network
- (2018) Burak Yenigun et al. Applied Sciences-Basel
- Development of single step drilling technology for multilayer metallic-composite stacks using uncoated and PVD coated carbide tools
- (2018) C.L. Kuo et al. Journal of Manufacturing Processes
- Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material
- (2018) R. Hussein et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of CFRP/Ti6Al4V stacks under minimal quantity lubricating condition
- (2018) M. Senthilkumar et al. Journal of Mechanical Science and Technology
- Comparison of drilled hole quality evaluation in CFRP/CFRP stacks using optical and ultrasonic non-destructive inspection
- (2018) Alessandra Caggiano et al. MACHINING SCIENCE AND TECHNOLOGY
- A new method for online monitoring when grinding Ti-6Al-4V alloy
- (2018) Nguyen DuyTrinh et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy)
- (2018) Natarajan Manikandan et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of chilled air on delamination, induced vibration, burr formation and surface roughness in CFRP drilling: a comparative study
- (2018) G Mannoj Rajkumar et al. Materials Research Express
- Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks
- (2017) Jinyang Xu et al. WEAR
- Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: In situ measurement by optical fiber
- (2017) Redouane Zitoune et al. WEAR
- Impact of Cryogenic Condition and Drill Diameter on Drilling Performance of CFRP
- (2017) Gültekin Basmaci et al. Applied Sciences-Basel
- Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review
- (2016) Jinyang Xu et al. COMPOSITE STRUCTURES
- Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks
- (2016) Jinyang Xu et al. COMPOSITE STRUCTURES
- Machinability analysis of dry drilling of carbon/epoxy composites: cases of exit delamination and cylindricity error
- (2016) M. F. Ameur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite
- (2016) Jinyang Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Assessment of delamination in composite materials: A review
- (2016) Jalumedi Babu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Characterization and Effects of Fiber Pull-Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite
- (2016) Sina Alizadeh Ashrafi et al. Materials
- Cutting Modeling of Hybrid CFRP/Ti Composite with Induced Damage Analysis
- (2016) Jinyang Xu et al. Materials
- Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber–reinforced plastic/titanium alloy stacks
- (2016) Yingying Wei et al. Advances in Mechanical Engineering
- Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic
- (2015) Seyedbehzad Ghafarizadeh et al. JOURNAL OF COMPOSITE MATERIALS
- Effect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic–Titanium Alloy Stacks Using Tungsten Carbide and Polycrystalline Diamond Tools
- (2015) D. Kim et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental evaluation of polycrystalline diamond tool geometries while drilling carbon fiber-reinforced plastics
- (2014) Y. Karpat et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review
- (2014) Demeng Che et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Developments in Machining of Stacked Materials Made of CFRP and Titanium/Aluminum Alloys
- (2014) Alokesh Pramanik et al. MACHINING SCIENCE AND TECHNOLOGY
- Mechanism of damage generation during drilling of carbon/epoxy composites and titanium alloy stacks
- (2014) Ben Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Comparative tool wear study based on drilling experiments on CFRp/Ti stack and its individual layers
- (2014) Xin Wang et al. WEAR
- A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks
- (2013) Kyung-Hee Park et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- COMPARATIVE STUDY OF TOOL LIFE AND HOLE QUALITY IN DRILLING OF CFRP/TITANIUM STACK USING COATED CARBIDE DRILL
- (2013) Ozden Isbilir et al. MACHINING SCIENCE AND TECHNOLOGY
- Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation
- (2012) Vaibhav A. Phadnis et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Rotary ultrasonic machining of carbon fiber reinforced plastic composites: An experimental study on cutting temperature
- (2012) WL Cong et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Drilling of composites and resulting surface integrity
- (2011) E. Brinksmeier et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools
- (2011) Kyung-Hee Park et al. WEAR
- A discrete element method for the simulation of CFRP cutting
- (2009) D. Iliescu et al. COMPOSITES SCIENCE AND TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started