Precipitation behavior and corrosion properties of friction stir welded AA5083 Al Mg alloy after sensitization

Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting

(2022) Yaoxiang Geng et al.   MATERIALS & DESIGN

Dislocation-aided electrochemical behavior of precipitates in stress corrosion cracking of Al–Zn–Mg–Cu alloys

(2022) Saif Haider Kayani et al.   MATERIALS CHARACTERIZATION

Diversity of intergranular corrosion and stress corrosion cracking for 5083 Al alloy with different grain sizes

(2022) Jin QIN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructure and corrosion behavior of bobbin tool friction stir welded 2219 aluminum alloy

(2022) Minghao Shao et al.   MATERIALS CHARACTERIZATION

Mechanical and stress corrosion cracking behavior of welded 5059H116 alloy

(2022) Rajesh Yadav et al.   CORROSION SCIENCE

Enhanced mechanical property and corrosion resistance of alloy 5182 FSW joints by Sc and Zr alloying

(2022) Youcai Qiu et al.   MATERIALS CHARACTERIZATION

Mechanical Properties of High Mg-Content Al-Mg-Sc-Zr Alloy Fabricated by Selective Laser Melting

(2021) Hao Tang et al.   METALS AND MATERIALS INTERNATIONAL

Misorientation effect of twist grain boundaries on crack nucleation from molecular dynamics

(2021) Can Cui et al.   ENGINEERING FRACTURE MECHANICS

Hydrogen enhanced cracking via dynamic formation of grain boundary inside aluminium crystal

(2021) De-Gang Xie et al.   CORROSION SCIENCE

Damage micromechanisms of stress corrosion cracking in Al-Mg alloy with high magnesium content

(2021) Kyosuke Hirayama et al.   CORROSION SCIENCE

Intergranular Corrosion and Microstructural Evolution in a Newly Designed Al-6Mg Alloy

(2021) Kweon-Hoon Choi et al.   Materials

Stress corrosion cracking resistant nanostructured Al-Mg alloy with low angle grain boundaries

(2021) W. Xu et al.   ACTA MATERIALIA

The influence of Zn2+ on stress corrosion cracking severity in a highly sensitised Al–Mg alloy

(2020) M. E. McMahon et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Beta phase distribution in Al-Mg alloys of varying composition and temper

(2020) Matthew E. McMahon et al.   CORROSION SCIENCE

Microstructure and mechanical properties of friction-stir-welded high-Mg-alloyed Al–Mg alloy plates at different rotating rates

(2020) Ying-Li Li et al.   RARE METALS

Nucleation and evolution of β phase and corresponding intergranular corrosion transition at 100–230 °C in 5083 alloy containing Er and Zr

(2019) Yusheng Ding et al.   MATERIALS & DESIGN

The effect of electrode potential on stress corrosion cracking in highly sensitized Al–Mg alloys

(2019) M.E. McMahon et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of β-phase precipitates in an aluminum-magnesium alloy at the nanoscale

(2019) Daniel L. Foley et al.   ACTA MATERIALIA

Effect of rolling on the microstructure and mechanical properties of 6061-T6 DS-FSW plate

(2019) Chengchao Du et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Sensitization and remediation effects on environmentally assisted cracking of Al-Mg naval alloys

(2018) M. Seifi et al.   CORROSION SCIENCE

The repassivation response from single cycle anodic polarization: The case study of a sensitized Al-Mg alloy

(2018) Monica Trueba et al.   ELECTROCHIMICA ACTA

Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy

(2018) Wenbin Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Through-thickness inhomogeneity of environmentally assisted cracking (EAC) in AA5083-H128 alloy

(2018) Wenbin Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mitigation of Intergranular Stress Corrosion Cracking in Al–Mg by Electrochemical Potential Control

(2017) M. E. McMahon et al.   JOM

Characterizing and modeling the precipitation of Mg-rich phases in Al 5xxx alloys aged at low temperatures

(2017) Gaosong Yi et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Characterization of the effects of different tempers and aging temperatures on the precipitation behavior of Al-Mg (5.25 at.%)-Mn alloys

(2017) Gaosong Yi et al.   MATERIALS & DESIGN

Survey of Detection, Mitigation, and Repair Technologies to Address Problems Caused by Sensitization of Al-Mg Alloys on Navy Ships

(2016) W.J. Golumbfskie et al.   CORROSION

Influence of aging treatment on the pitting behavior associated with the dissolution of active nanoscale β-phase precipitates for an Al–Mg alloy

(2016) L. Guan et al.   CORROSION SCIENCE

Survey of Detection, Mitigation, and Repair Technologies to Address Problems Caused by Sensitization of Al-Mg Alloys on Navy Ships

(2016) W.J. Golumbfskie et al.   CORROSION

Dynamic strain aging studied at the atomic scale

(2015) H. Aboulfadl et al.   ACTA MATERIALIA

Modeling sensitization of Al–Mg alloys via β-phase precipitation kinetics

(2015) M.A. Steiner et al.   SCRIPTA MATERIALIA

Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al–Mg alloy

(2014) X. Sauvage et al.   ACTA MATERIALIA

Capillarity Effect Controlled Precipitate Growth at the Grain Boundary of Long-Term Aging Al 5083 Alloy

(2014) Gaosong Yi et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Grain boundary misorientation dependence of β phase precipitation in an Al–Mg alloy

(2014) D. Scotto D’Antuono et al.   SCRIPTA MATERIALIA

The role of grain boundary plane orientation in the β phase precipitation of an Al–Mg alloy

(2014) Yifu Zhao et al.   SCRIPTA MATERIALIA

Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium–magnesium alloys

(2013) J.A. Lyndon et al.   CORROSION SCIENCE

Influence of alloyed Nd content on the corrosion of an Al–5Mg alloy

(2013) Y. Wang et al.   CORROSION SCIENCE

Behavior of β phase (Al3Mg2) in AA 5083 during friction stir welding

(2013) Don-Hyun Choi et al.   INTERMETALLICS

Role of the β-phase in grain boundary and dislocation anelasticity in binary Al–Mg alloys

(2013) I.S. Golovin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Use of Friction Stir Processing to Eliminate Sensitization in an Al-Mg Alloy

(2012) A.P. Reynolds et al.   CORROSION

Micromechanics of dislocation channeling in intergranular stress corrosion crack nucleation

(2012) Gary S. Was et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Modelling of the effect of dislocation channel on intergranular microcrack nucleation in pre-irradiated austenitic stainless steels during low strain rate tensile loading

(2010) Pierre Evrard et al.   JOURNAL OF NUCLEAR MATERIALS

Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization

(2009) M. Bobby Kannan et al.   ENGINEERING FRACTURE MECHANICS

The effect of recrystallization on corrosion and electrochemical behavior of 7150 Al alloy

(2009) G. S. Peng et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Precipitation behavior of the ß phase in Al-5083

(2009) R. Goswami et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution in pure aluminum processed by high-pressure torsion

(2008) Yuki Ito et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Observation of Giant Diffusivity Along Dislocation Cores

(2008) M. Legros et al.   SCIENCE