标题
A review of vibration-based gear wear monitoring and prediction techniques
作者
关键词
-
出版物
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
Volume 182, Issue -, Pages 109605
出版商
Elsevier BV
发表日期
2022-07-27
DOI
10.1016/j.ymssp.2022.109605
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- An adhesive wear model of rough gear surface considering modified load distribution factor
- (2022) Haihang Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Adhesive Wear Failures
- (2022) Bojan Podgornik Journal of Failure Analysis and Prevention
- A novel adaptive bandwidth selection method for Vold–Kalman filtering and its application in wind turbine planetary gearbox diagnostics
- (2022) Ke Feng et al. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
- A novel cyclic-correntropy based indicator for gear wear monitoring
- (2022) Ke Feng et al. TRIBOLOGY INTERNATIONAL
- Vibration-Based System Degradation Monitoring under Gear Wear Progression
- (2022) Ke Feng et al. Coatings
- A novel similarity-based status characterization methodology for gear surface wear propagation monitoring
- (2022) Ke Feng et al. TRIBOLOGY INTERNATIONAL
- Data-Driven Prognostic Scheme for Bearings Based on a Novel Health Indicator and Gated Recurrent Unit Network
- (2022) Qing Ni et al. IEEE Transactions on Industrial Informatics
- Vibration Analysis for Fault Detection of Wind Turbine Drivetrains—A Comprehensive Investigation
- (2021) Wei Teng et al. SENSORS
- Condition Monitoring of Slow-speed Gear Wear using a Transmission Error-based Approach with Automated Feature Selection
- (2021) Stefan Sendlbeck et al. International Journal of Prognostics and Health Management
- Vibration-based monitoring and prediction of surface profile change and pitting density in a spur gear wear process
- (2021) Ke Feng et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A fault information-guided variational mode decomposition (FIVMD) method for rolling element bearings diagnosis
- (2021) Qing Ni et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A Mathematical Model for Parametric Tooth Profile of Spur Gears
- (2020) Guodong Zhai et al. MATHEMATICAL PROBLEMS IN ENGINEERING
- Critical evaluation and comparison of psychoacoustics, acoustics and vibration features for gear fault correlation and classification
- (2020) P.V. Kane et al. MEASUREMENT
- How to model and implement connections between physical and virtual models for digital twin application
- (2020) Haifan Jiang et al. JOURNAL OF MANUFACTURING SYSTEMS
- Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wear
- (2020) Yifan Huangfu et al. MECHANISM AND MACHINE THEORY
- Automated assessment of gear wear mechanism and severity using mould images and convolutional neural networks
- (2020) Haichuan Chang et al. TRIBOLOGY INTERNATIONAL
- Study on gear contact fatigue failure competition mechanism considering tooth wear evolution
- (2020) Heli Liu et al. TRIBOLOGY INTERNATIONAL
- Investigation on the wear of spur gears generated by modified cutter
- (2020) Fangyan Zheng et al. Friction
- A digital twin-driven production management system for production workshop
- (2020) Jun Ma et al. The International Journal of Advanced Manufacturing Technology
- An improved sideband energy ratio for fault diagnosis of planetary gearboxes
- (2020) Mian Zhang et al. JOURNAL OF SOUND AND VIBRATION
- Multisensor data fusion for gearbox fault diagnosis using 2-D convolutional neural network and motor current signature analysis
- (2020) Moslem Azamfar et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Fault mechanism and dynamic modeling of planetary gear with gear wear
- (2020) Zhixian Shen et al. MECHANISM AND MACHINE THEORY
- Use of an improved vibration-based updating methodology for gear wear prediction
- (2020) Ke Feng et al. ENGINEERING FAILURE ANALYSIS
- Use of cyclostationary properties of vibration signals to identify gear wear mechanisms and track wear evolution
- (2020) Ke Feng et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Online oil debris monitoring of rotating machinery: A detailed review of more than three decades
- (2020) Jiayi Sun et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A novel correntropy-based band selection method for the fault diagnosis of bearings under fault-irrelevant impulsive and cyclostationary interferences
- (2020) Qing Ni et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Nonlinear tribo-dynamic model and experimental verification of a spur gear drive under loss-of-lubrication condition
- (2020) Bo Hu et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A quantitatively distributed wear-measurement method for spur gears during micro-pitting and pitting tests
- (2020) Jiachun Lin et al. TRIBOLOGY INTERNATIONAL
- The Influence of Slide–Roll Ratio on the Extent of Micropitting Damage in Rolling–Sliding Contacts Pertinent to Gear Applications
- (2019) Pawel Rycerz et al. TRIBOLOGY LETTERS
- An adhesive wear model for helical gears in line-contact mixed elastohydrodynamic lubrication
- (2019) Hongbing Wang et al. WEAR
- Vibration-based updating of wear prediction for spur gears
- (2019) Ke Feng et al. WEAR
- Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts
- (2019) Andreas Rosenkranz et al. ADVANCED ENGINEERING MATERIALS
- Comprehensive planet gear diagnostics: Use of transmission error and mesh phasing to distinguish localised fault types and identify faulty gears
- (2019) Dikang Peng et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Vibration based condition monitoring and fault diagnosis of wind turbine planetary gearbox: A review
- (2019) Tianyang Wang et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Evaluating the influence of tooth surface wear on TVMS of planetary gear set
- (2019) Zhixian Shen et al. MECHANISM AND MACHINE THEORY
- Application of surface replication combined with image analysis to investigate wear evolution on gear teeth – A case study
- (2019) Haichuan Chang et al. WEAR
- Review of Condition Monitoring of Rolling Element Bearing Using Vibration Analysis and Other Techniques
- (2019) Chandrabhanu Malla et al. Journal of Vibration Engineering & Technologies
- Identification of failure modes of a PEEK-steel gear pair under lubrication
- (2019) Zehua Lu et al. INTERNATIONAL JOURNAL OF FATIGUE
- A correlation coefficient based vibration indicator for detecting natural pitting progression in spur gears
- (2019) Pradeep Kundu et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Monitoring gear surface degradation using cyclostationarity of acoustic emission
- (2019) P. Feng et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Enabling technologies and tools for digital twin
- (2019) Qinglin Qi et al. JOURNAL OF MANUFACTURING SYSTEMS
- Sparse time series modeling of the baseline vibration from a gearbox under time-varying speed condition
- (2019) Yuejian Chen et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Effects of lubrication on gear performance: A review
- (2019) Heli Liu et al. MECHANISM AND MACHINE THEORY
- A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue
- (2019) Raynald Guilbault et al. TRIBOLOGY INTERNATIONAL
- Mechanical wear debris feature, detection, and diagnosis: A review
- (2018) Wei HONG et al. Chinese Journal of Aeronautics
- Quasi-Static and Dynamic Behaviors of Helical Gear System with Manufacturing Errors
- (2018) Bing Yuan et al. Chinese Journal of Mechanical Engineering
- A realistic dynamic model for gear fault diagnosis
- (2018) I. Dadon et al. ENGINEERING FAILURE ANALYSIS
- An Integrated Prognostics Method for Failure Time Prediction of Gears Subject to the Surface Wear Failure Mode
- (2018) Fuqiong Zhao et al. IEEE TRANSACTIONS ON RELIABILITY
- An enhanced morphology gradient product filter for bearing fault detection
- (2018) Yifan Li et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Gearbox condition monitoring in wind turbines: A review
- (2018) Jack P. Salameh et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears
- (2018) Yaguo Lei et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Dynamic modeling of gearbox faults: A review
- (2018) Xihui Liang et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Machinery health prognostics: A systematic review from data acquisition to RUL prediction
- (2018) Yaguo Lei et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Prediction and optimization of hobbing gear geometric deviations
- (2018) Shouli Sun et al. MECHANISM AND MACHINE THEORY
- A finite line contact tribo-dynamic model of a spur gear pair
- (2018) Tiancheng Ouyang et al. TRIBOLOGY INTERNATIONAL
- Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear
- (2018) G.E. Morales-Espejel et al. WEAR
- Fault diagnosis of rolling bearing under speed fluctuation condition based on Vold-Kalman filter and RCMFE
- (2018) Yongbo Li et al. IEEE Access
- A fault diagnosis method for planetary gearboxes under non-stationary working conditions using improved Vold-Kalman filter and multi-scale sample entropy
- (2018) Yongbo Li et al. JOURNAL OF SOUND AND VIBRATION
- PITTING DAMAGE LEVELS ESTIMATION FOR PLANETARY GEAR SETS BASED ON MODEL SIMULATION AND GREY RELATIONAL ANALYSIS
- (2018) Cheng Zhe et al. TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
- Simulation of fatigue failure on tooth flanks in consideration of pitting initiation and growth
- (2018) Max Weibring et al. TRIBOLOGY INTERNATIONAL
- Use of mesh phasing to locate faulty planet gears
- (2018) Dikang Peng et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A phase angle based diagnostic scheme to planetary gear faults diagnostics under non-stationary operational conditions
- (2017) Ke Feng et al. JOURNAL OF SOUND AND VIBRATION
- A diagnostic signal selection scheme for planetary gearbox vibration monitoring under non-stationary operational conditions
- (2017) Ke Feng et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Lifetime prediction for the subsurface crack propagation using three-dimensional dynamic FEA model
- (2017) Yuan Yin et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis
- (2017) Ruiliang Zhang et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Helical gear wear monitoring: Modelling and experimental validation
- (2017) Khaldoon F. Brethee et al. MECHANISM AND MACHINE THEORY
- Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects
- (2017) Miryam B. Sánchez et al. MECHANISM AND MACHINE THEORY
- Gear Wear Process Monitoring Using a Sideband Estimator Based on Modulation Signal Bispectrum
- (2017) Ruiliang Zhang et al. Applied Sciences-Basel
- Detection of gear cracks in a complex gearbox of wind turbines using supervised bounded component analysis of vibration signals collected from multi-channel sensors
- (2016) Zhixiong Li et al. JOURNAL OF SOUND AND VIBRATION
- Development of a gear vibration indicator and its application in gear wear monitoring
- (2016) Chongqing Hu et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- K-nearest neighbors based methods for identification of different gear crack levels under different motor speeds and loads: Revisited
- (2016) Dong Wang MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- The influence of tooth pitting on the mesh stiffness of a pair of external spur gears
- (2016) Xihui Liang et al. MECHANISM AND MACHINE THEORY
- Investigation on coupling effects between surface wear and dynamics in a spur gear system
- (2016) Xianzeng Liu et al. TRIBOLOGY INTERNATIONAL
- Measurement of mean wear coefficient during gear tests under various operating conditions
- (2016) José A. Brandão et al. TRIBOLOGY INTERNATIONAL
- Monitoring of Wind Turbine Gearbox Condition through Oil and Wear Debris Analysis: A Full-Scale Testing Perspective
- (2016) Shuangwen Sheng TRIBOLOGY TRANSACTIONS
- A prototype of on-line extraction and three-dimensional characterisation of wear particle features from video sequence
- (2016) Hongkun Wu et al. WEAR
- Review on dynamics of cracked gear systems
- (2015) Hui Ma et al. ENGINEERING FAILURE ANALYSIS
- Vibration signal modeling of a planetary gear set for tooth crack detection
- (2015) Xihui Liang et al. ENGINEERING FAILURE ANALYSIS
- Assessment of surface contact fatigue failure in a spur geared system based on the tribological and vibration parameter analysis
- (2015) M. Amarnath et al. MEASUREMENT
- On the prediction of steady-state wear rate in spur gears
- (2015) M. Masjedi et al. WEAR
- A quasi-stationary approach to particle concentration and distribution in gear oil for wear mode estimation
- (2015) Morten Henneberg et al. WEAR
- Development of a Novel Wear Detection System for Wind Turbine Gearboxes
- (2013) Andrew Hamilton et al. IEEE SENSORS JOURNAL
- A micro-pitting model for spur gear contacts
- (2013) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Vibration signal analysis for gear fault diagnosis with various crack progression scenarios
- (2013) Omar D. Mohammed et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications
- (2013) Jay Lee et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- An approximate method to predict surface wear of hypoid gears using surface interpolation
- (2013) D. Park et al. MECHANISM AND MACHINE THEORY
- Neural network model for condition monitoring of wear and film thickness in a gearbox
- (2013) C. Sreepradha et al. NEURAL COMPUTING & APPLICATIONS
- Theoretical and experimental investigation of wear in internal gears
- (2013) Mert Şafak Tunalioğlu et al. WEAR
- A physics-based model to predict micro-pitting lives of lubricated point contacts
- (2012) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Some Results on the Random Wear Coefficient of the Archard Model
- (2012) Fabio Antonio Dorini et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- A Fatigue Model for Spur Gear Contacts Operating Under Mixed Elastohydrodynamic Lubrication Conditions
- (2012) S. Li et al. JOURNAL OF MECHANICAL DESIGN
- Vibration signal models for fault diagnosis of planetary gearboxes
- (2012) Zhipeng Feng et al. JOURNAL OF SOUND AND VIBRATION
- Film Thickness and Asperity Load Formulas for Line-Contact Elastohydrodynamic Lubrication With Provision for Surface Roughness
- (2012) M. Masjedi et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- A future possibility of vibration based condition monitoring of rotating machines
- (2012) Jyoti K. Sinha et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Prediction of surface wear of hypoid gears using a semi-analytical contact model
- (2012) D. Park et al. MECHANISM AND MACHINE THEORY
- Correlation between features of acoustic emission signals and mechanical wear mechanisms
- (2012) Alan Hase et al. WEAR
- Experimental investigations of surface wear assessment of spur gear teeth
- (2011) Muniyappa Amarnath et al. JOURNAL OF VIBRATION AND CONTROL
- Detection and Advancement Monitoring of Distributed Pitting Failure in Gears
- (2010) Hasan Ozturk et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- Dynamic analyses of gear pairs incorporating the effect of time-varying lubrication damping
- (2010) Kuo Jao Huang et al. JOURNAL OF VIBRATION AND CONTROL
- Novel adaptation of the demodulation technology for gear damage detection to variable amplitudes of mesh harmonics
- (2010) F. Combet et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A Methodology to Predict Surface Wear of Planetary Gears Under Dynamic Conditions#
- (2010) A. Kahraman et al. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
- Static and dynamic simulations of mild abrasive wear in wide-faced solid spur and helical gears
- (2010) T. Osman et al. MECHANISM AND MACHINE THEORY
- Load distribution model along the line of contact for involute external gears
- (2010) José I. Pedrero et al. MECHANISM AND MACHINE THEORY
- Prediction of Spur Gear Mechanical Power Losses Using a Transient Elastohydrodynamic Lubrication Model
- (2010) Sheng Li et al. TRIBOLOGY TRANSACTIONS
- A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors
- (2009) Murat Inalpolat et al. JOURNAL OF SOUND AND VIBRATION
- Friction and wear behaviour of acetal and nylon gears
- (2009) K. Mao et al. WEAR
- Multi time scale simulations for wear prediction in micro-gears
- (2009) V. Hegadekatte et al. WEAR
- Wavelet analysis for gear crack identification
- (2008) Ales Belsak et al. ENGINEERING FAILURE ANALYSIS
- Applications of detrended-fluctuation analysis to gearbox fault diagnosis
- (2008) E.P. de Moura et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation
- (2008) H. Endo et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Effect of addendum on contact strength, bending strength and basic performance parameters of a pair of spur gears
- (2008) Shuting Li MECHANISM AND MACHINE THEORY
- Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared system
- (2008) M. Amarnath et al. TRIBOLOGY INTERNATIONAL
- Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth
- (2008) Fatih Karpat et al. TRIBOLOGY TRANSACTIONS
- Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform
- (2007) Chinmaya Kar et al. JOURNAL OF SOUND AND VIBRATION
- Indicators of cyclostationarity: Theory and application to gear fault monitoring
- (2007) Amani Raad et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Simulating gear and bearing interactions in the presence of faults
- (2007) N. Sawalhi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Uncertainty analysis on the wear coefficient of Archard model
- (2007) Cláudio R. Ávila da Silva et al. TRIBOLOGY INTERNATIONAL
- Gear tooth wear in sintered spur gears under dry running conditions
- (2007) S. Dhanasekaran et al. WEAR
- Expert system development for vibration analysis in machine condition monitoring
- (2006) Stephan Ebersbach et al. EXPERT SYSTEMS WITH APPLICATIONS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started