Improved mechanical properties of Cu8Ni4Sn alloy as functionally graded composites with preserving its thermal and electrical properties
出版年份 2022 全文链接
标题
Improved mechanical properties of Cu8Ni4Sn alloy as functionally graded composites with preserving its thermal and electrical properties
作者
关键词
-
出版物
MATERIALS CHEMISTRY AND PHYSICS
Volume 292, Issue -, Pages 126778
出版商
Elsevier BV
发表日期
2022-09-21
DOI
10.1016/j.matchemphys.2022.126778
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Improving mechanical properties of Cu/Ti3AlC2 composites via in-situ decomposed gradient interfaces
- (2022) Ying Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Friction Stir Process on the Physical, Microstructural, Corrosive, and Electrical Properties of an Al–Mg Alloy Modified with Ti–B Additives
- (2022) Essam B. Moustafa et al. Materials
- Thermal Conductivity of Composite Materials Copper-Fullerene Soot
- (2022) Tatiana Koltsova et al. Materials
- Effects of metastable θ′ precipitates on the strengthening, wear and electrical behaviors of Al 2519-SiC/fly ash hybrid nanocomposites synthesized by powder metallurgy technique
- (2022) Smain Bezzina et al. Silicon
- Evaluation of the dynamic behavior, elastic properties, and in vitro bioactivity of some borophosphosilicate glasses for orthopedic applications
- (2022) Waheed S. Abushanab et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Tribo-mechanical measurements and in vivo performance of zirconia-containing biphasic calcium phosphate material implanted in a rat model for bone replacement applications
- (2022) Rasha A. Youness et al. MATERIALS CHEMISTRY AND PHYSICS
- Compressibility behaviour of conventional AlN-Cu mixtures and Cu-(AlN-Cu) composite powder mixtures
- (2022) D. Ramírez-Vinasco et al. POWDER TECHNOLOGY
- Characterization and performance evaluation of Cu-based/TiO2 nano composites
- (2022) D. Saber et al. Scientific Reports
- Improvement of the microstructure and mechanical properties by hybridizing the surface of AA7075 by hexagonal boron nitride with carbide particles using the FSP process
- (2022) Essam B. Moustafa et al. Journal of Materials Research and Technology-JMR&T
- Recycling of aluminum dross and silica fume wastes for production of mullite-containing ceramics: Powder preparation, sinterability and properties
- (2022) Mahmoud F. Zawrah et al. CERAMICS INTERNATIONAL
- Evaluation of the electrical and dielectric behavior of the apatite layer formed on the surface of hydroxyapatite/hardystonite/copper oxide hybrid nanocomposites for bone repair applications
- (2022) Rasha A. Youness et al. CERAMICS INTERNATIONAL
- Effect of SiC on Mechanical and Microstructural Characteristics of Al Based Functionally Graded Material
- (2021) P. Vijaya Kumar et al. Silicon
- Synthesis, Structural and Biomedical Characterization of Hydroxyapatite/Borosilicate Bioactive Glass Nanocomposites
- (2021) Dalia E. Abulyazied et al. Journal of Inorganic and Organometallic Polymers and Materials
- A Study to Evaluate the Bioactivity Behavior and Electrical Properties of Hydroxyapatite/Ag2O-Borosilicate Glass Nanocomposites for Biomedical Applications
- (2021) Asma M. Alturki et al. Journal of Inorganic and Organometallic Polymers and Materials
- Improving mechanical and tribological performances of pure copper matrix surface composites reinforced by Ti2AlC MAX phase and MoS2 nanoparticles
- (2021) Yousef Mazaheri et al. MATERIALS CHEMISTRY AND PHYSICS
- The Effect of Different Fly Ash and Vanadium Carbide Contents on the Various Properties of Hypereutectic Al-Si Alloys-Based Hybrid Nanocomposites
- (2021) Waheed S. AbuShanab et al. Silicon
- Role of hybrid nanoparticles on thermal, electrical conductivity, microstructure, and hardness behavior of nanocomposite matrix
- (2021) Salem S. Abdel Aziz et al. Journal of Materials Research and Technology-JMR&T
- Improved toughness, electrical conductivity and optical properties of bioactive borosilicate glasses for orthopedic applications
- (2021) Ayshah S. Alatawi et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials
- (2021) Serhat Şap et al. Journal of Materials Research and Technology-JMR&T
- Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering
- (2021) K.R. Ramkumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and properties of Cu-TiNi composites prepared by vacuum hot pressing
- (2021) Xi Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural, mechanical and tribological characterization on the Al based functionally graded material fabricated powder metallurgy
- (2020) Pattapagalu Naga Sudhakar Srinivas et al. Materials Research Express
- Biocompatibility, physico-chemical and mechanical properties of hydroxyapatite-based silicon dioxide nanocomposites for biomedical applications
- (2020) Mohammed A. Taha et al. CERAMICS INTERNATIONAL
- Microstructural, tribological and compression behaviour of Copper matrix reinforced with Graphite-SiC hybrid composites
- (2020) Anbesh Jamwal et al. MATERIALS CHEMISTRY AND PHYSICS
- Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying
- (2020) Essam B. Moustafa et al. International Journal of Minerals Metallurgy and Materials
- Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing
- (2020) C. Salvo et al. MATERIALS CHARACTERIZATION
- Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties
- (2020) Meet Jaydeepkumar Oza et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Al substitution with Si and Sn on tribological performance of Ti3AlC2
- (2020) Leping Cai et al. CERAMICS INTERNATIONAL
- Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing
- (2019) R. Clinktan et al. CERAMICS INTERNATIONAL
- Effects of ZrC content and mechanical alloying on the microstructural and mechanical properties of hypoeutectic Al-7 wt.% Si composites prepared by spark plasma sintering
- (2019) Duygu Ağaoğulları CERAMICS INTERNATIONAL
- In vitro bioactivity, molecular structure and mechanical properties of zirconia-carbonated hydroxyapatite nanobiocomposites sintered at different temperatures
- (2019) Rasha A. Youness et al. MATERIALS CHEMISTRY AND PHYSICS
- Preparation of CNTs/Cu composites with good electrical conductivity and excellent mechanical properties
- (2019) Shaoli Fu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced tensile properties and electrical conductivity of Cu-CNT nanocomposites processed via the combination of flake powder metallurgy and high pressure torsion methods
- (2019) M.R. Akbarpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of the addition of carbonated hydroxyapatite and selenium dioxide on mechanical properties and in vitro bioactivity of borosilicate inert glass
- (2018) Rasha A. Youness et al. CERAMICS INTERNATIONAL
- Strengthening mechanisms based on reinforcement distribution uniformity for particle reinforced aluminum matrix composites
- (2018) Gang CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites
- (2018) Yu Pan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of sintering temperatures on the in vitro bioactivity, molecular structure and mechanical properties of titanium/carbonated hydroxyapatite nanobiocomposites
- (2017) Rasha A. Youness et al. JOURNAL OF MOLECULAR STRUCTURE
- Microstructure and Properties of Cu-ZrO2 Nanocomposites Synthesized by in Situ Processing
- (2017) Marwa Elmahdy et al. Materials Research-Ibero-american Journal of Materials
- Composites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity
- (2017) Valerio Oddone et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Microstructure and thermal properties of Cu-SiC composite materials depending on the sintering technique
- (2017) Marcin Chmielewski et al. SCIENCE OF SINTERING
- Effect of Graphite and SiC Addition into Cu and SiC Particle Size Effect on Fabrication of Cu–Graphite–SiC MMC by Powder Metallurgy
- (2017) Arabinda Meher et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Strengthening Mechanisms on (Cu–10Zn)100−x–x wt% Al2O3 (x = 0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of Reinforcement Content
- (2017) S. Sivasankaran et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications
- (2015) S. GHOLAMI SHIRI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles
- (2009) M. Habibnejad-Korayem et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started