4.7 Article

Evaluation of 1,3-dioxolane in promoting CO2 hydrate kinetics and its significance in hydrate-based CO2 sequestration

期刊

CHEMICAL ENGINEERING JOURNAL
卷 451, 期 -, 页码 -

出版社

ELSEVIER SCIENCE SA
DOI: 10.1016/j.cej.2022.138799

关键词

CO 2 hydrate; 3-dioxolane; Phase equilibria; Raman spectroscopy; Hydrate morphology; Kinetics

向作者/读者索取更多资源

Novel CCUS solutions are required to reduce anthropogenic CO2 emissions for climate change mitigation. Hydrate-based CO2 sequestration (HCS) is a carbon-neutrality technology that stores CO2 in solid hydrate form. However, there are challenges in HCS application, such as demanding thermodynamic conditions, slow formation kinetics, and low CO2 gas uptake. This study examined 1,3-dioxolane (DIOX) as a potential CO2 hydrate promoter and found that it has dual-function promotion effects, but its effectiveness is weakened at certain concentrations and high pressure. The study provides a comprehensive evaluation of DIOX as a possible promoter for CO2 hydrate in HCS application.
To reduce anthropogenic CO2 emissions for the mitigation of climate change require novel CCUS solutions. Hydrate-based CO2 sequestration (HCS) is a novel carbon-neutrality technology that aims to store CO2 in solid hydrate form with long-term stability. However, imminent issues exist for the application of HCS in terms of demanding thermodynamic conditions, slow formation kinetics, and low CO2 gas uptake. These challenges necessitate the quest for an efficient and eco-friendly CO2 hydrate promoter. In this study, 1,3-dioxolane (DIOX) as a low-toxicity CO2 hydrate promoter was systematically examined. The phase equilibria, cage occupancy, and the kinetics of binary CO2 + DIOX hydrate were measured for DIOX concentrations (CDIOX) varying from 0.05 mol% to 5.56 mol%. It was confirmed that DIOX is a dual-function promoter for CO2 hydrate, but its promotion effect is weakened for CDIOX between 0.60 mol% and 1.00 mol% and for all CDIOX at relatively high pressure. The CO2 uptake in the hydrate phase increases with CDIOX above 2.00 mol% and is the highest for CDIOX = 5.56 mol% (57.08 +/- 6.39 mmol/mol). Based on the morphology observation, hydrate transits from ice-like to slurry to mushy-like and finally to snow-like with increasing CDIOX. Interestingly, we observed that the aqueous phase separates into two phases (i.e., DIOX-rich and H2O-rich) at pressure above 3.09 MPa, which explains the gradual loss of the promotion effect. The results of our study provide a comprehensive evaluation on DIOX as a possible promoter for CO2 hydrate in HCS application.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

Article Energy & Fuels

An electrical resistivity-based method for measuring semi-clathrate hydrate formation kinetics: Application for cold storage and transport

Hyunho Kim, Junjie Zheng, Zhenyuan Yin, Sreekala Kumar, Jackson Tee, Yutaek Seo, Praveen Linga

Summary: This study developed an experimental method based on electrical resistivity to quantify the hydrate fraction in semi-clathrate hydrate slurry and investigated the effect of temperature on TBAB hydrate formation. The results showed that lowering the temperature significantly reduced the induction time and increased the hydrate growth rate. Additionally, the amino acid L-tryptophan was identified as a good kinetic promoter for TBAB hydrate formation.

APPLIED ENERGY (2022)

Article Energy & Fuels

Fluid production behavior from water-saturated hydrate-bearing sediments below the quadruple point of CH4 + H2O

Qing-Cui Wan, Zhenyuan Yin, Qiang Gao, Hu Si, Bo Li, Praveen Linga

Summary: Driven by large resource volume, extraction of CH4 from hydrate reservoirs has attracted global attention. Depressurization is considered a feasible method, but the fluid production behavior from water-saturated hydrate-bearing sediments below the quadruple point of CH4 + H2O still needs further investigation. Experiment results show that ice formation affects temperature response, but does not significantly impact gas production. Higher hydrate phase saturation improves gas production rate and final recovery ratio, indicating ultra-deep depressurization as a viable option for enhancing CH4 recovery.

APPLIED ENERGY (2022)

Article Engineering, Environmental

Effect of sodium montmorillonite clay on the kinetics of CH4 hydrate-implication for energy recovery

Junjie Ren, Xiaohui Liu, Mengya Niu, Zhenyuan Yin

Summary: This study investigates the effects of montmorillonite clay particles on the formation and dissociation kinetics of methane hydrate (MH). The experimental results reveal that clay particles promote nucleation but delay the growth kinetics of MH. The findings provide insight into the mechanisms of clay particles on the kinetics of MH and have implications for energy recovery from clay-rich hydrate-bearing sediments.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Comparison of SDS and L-Methionine in promoting CO2 hydrate kinetics: Implication for hydrate-based CO2 storage

Xuejian Liu, Junjie Ren, Daoyi Chen, Zhenyuan Yin

Summary: The continuously increasing CO2 emissions since industrialization has sparked widespread concerns on environmental and climate change issues. This study compared the effect of sodium dodecyl sulfate (SDS) and L-methionine ((L)-Met) on CO2 hydrate formation kinetics, and found that (L)-Met is a more effective and eco-friendly kinetic promoter than SDS. The experimental results and hydrate morphology observations provided possible explanations for the observed kinetics. A novel calculation method was developed to quantify the partition of CO2 in different phases. The reusability of (L)-Met as a CO2 hydrate kinetic promoter was also demonstrated. This study highlights the importance of finding efficient and eco-friendly technologies for CO2 sequestration.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Thermodynamics

Experimental investigation on the production performance from oceanic hydrate reservoirs with different buried depths

Li Huang, Zhenyuan Yin, Praveen Linga, Hari Prakash Veluswamy, Changling Liu, Qiang Chen, Gaowei Hu, Jianye Sun, Nengyou Wu

Summary: In this study, the production performance of hydrate reservoirs at different buried depths was experimentally investigated. The results show that gas and water production increase with elevated buried depths at the same production pressure. However, based on the gas to water ratio, a deep-buried reservoir has a higher production potential at the initial stage, while a shallow-buried reservoir is more suitable for fluid production in the later stage.

ENERGY (2022)

Article Engineering, Environmental

CH4 hydrate production coupled with CO2 sequestration and hydrate restoration employing depressurization assisted by CO2-N2 injection at marine conditions

Mengya Niu, Zhenyuan Yin, Yifei Sun, Wei Fang, Guangjin Chen, Daoyi Chen

Summary: This study investigates the impact of key factors in the depressurization process on the formation of mixed hydrates, CO2 sequestration, and hydrate restoration. The results show that increasing CH4 production decreases CO2 sequestration and hydrate restoration.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Thermodynamics

Semi-clathrate hydrate slurry as a cold energy storage and transport medium: Rheological study, energy analysis and enhancement by amino acid

Hyunho Kim, Junjie Zheng, Zhenyuan Yin, Ponnivalavan Babu, Sreekala Kumar, Jackson Tee, Praveen Linga

Summary: The rheology of TBAB semi-clathrate hydrate slurry (SHS) was studied, and the discrepancy in the literature was clarified. TBAB SHS exhibited non-Newtonian shear-thinning behavior, with its apparent viscosity increasing exponentially with the increase of hydrate fraction. Type B TBAB SHS was recommended due to its lower apparent viscosity. Additionally, the environmentally benign additive L-tryptophan was found to significantly decrease the apparent viscosity of TBAB SHS and reduce pumping power consumption in cooling applications by 68.7%.

ENERGY (2023)

Article Green & Sustainable Science & Technology

Evaluating CO2+C3H8 hydrate kinetics with cyclopentane and graphite for sustainable hydrate-based desalination

Jibao Zhang, Xialian Xing, Zhenyuan Yin, Ning Mao, Tianbiao He

Summary: This study investigates the effect of cyclopentane/water volume ratio, graphite size, and graphite/water volume ratio on CO2+C3H8 hydrate formation kinetics. The results show that cyclopentane can shift the hydrate phase equilibrium condition and accelerate hydrate formation. The smaller size of hydrophobic graphite provides more sites for hydrate nucleation and growth. The synergy of graphite and cyclopentane reduces the hydrate induction time and increases the hydrate conversion rate.

JOURNAL OF CLEANER PRODUCTION (2023)

Article Energy & Fuels

Roles of montmorillonite clay on the kinetics and morphology of CO2 hydrate in hydrate-based CO2 sequestration

Junjie Ren, Siyu Zeng, Daoyi Chen, Mingjun Yang, Praveen Linga, Zhenyuan Yin

Summary: This study investigates the role of clay minerals in CO2 hydrate formation and dissociation in clay-rich sediments. It is found that the presence of sodium montmorillonite (Na-MMT) clay significantly reduces the induction time and growth rate of CO2 hydrate due to additional nucleation sites and induced surface electric field. The high viscosity of the suspension and the clay-induced strongly-polarized water layer impede the mass transfer of CO2, thereby retarding the overall kinetics of CO2 hydrate formation.

APPLIED ENERGY (2023)

Article Engineering, Chemical

Experimental study on the competition between carbon dioxide hydrate and ice below the freezing point

Yan Li, Alberto Maria Gambelli, Jiangzhi Chen, Zhenyuan Yin, Federico Rossi, Enrico Tronconi, Shenghua Mei

Summary: As climate change and industrial requirements intensify, the potential of CO2 hydrates for carbon storage has gained attention. However, the subzero behavior of the CO2-H2O system is not well understood and requires further research. This study investigated the growth mechanisms of CO2 gas hydrate and ice below the quadruple point. The results showed that preferential hydrate formation leads to ice dissolution at small subcooling temperatures, while ice forms first and hydrate mainly forms a fibrous envelope at large subcooling temperatures.

CHEMICAL ENGINEERING SCIENCE (2023)

Article Chemistry, Multidisciplinary

Coupling Amino Acid with THF for the Synergistic Promotion of CO2 Hydrate Micro Kinetics: Implication for Hydrate-Based CO2 Sequestration

Xuejian Liu, Yan Li, Guang-Jin Chen, Dao-Yi Chen, Bo Sun, Zhenyuan Yin

Summary: CO2 capture and sequestration is the most effective technology for reducing CO2 emissions and mitigating climate change. Hydrate-based CO2 sequestration has been proposed as a method for long-term safe and stable CO2 sequestration, and it can reduce CO2 concentration in the atmosphere and achieve carbon neutrality. However, improving the formation kinetics of CO2 hydrate is a major challenge. This study identified a synergistic effect on CO2 hydrate formation when a low-dose thermodynamic promoter (THF) is coupled with an environment-friendly kinetic promoter (L-Met), providing guidance for the use of novel bio-friendly promoters.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Article Engineering, Environmental

Coupling amino acid L-Val with THF for superior hydrogen hydrate kinetics: Implication for hydrate-based hydrogen storage

Jibao Zhang, Yan Li, Zhenyuan Yin, Praveen Linga, Tianbiao He, Xiangyuan Zheng

Summary: This study introduces an environmentally friendly kinetic promoter (L-valine) and couples it with a thermodynamic promoter (THF) to enhance the kinetics of H2 hydrate formation. The optimal enhancement is achieved using 0.3 wt% L-Val coupled with 5.56 mol% THF, resulting in a maximum volumetric H2 uptake of 29.83 +/- 1.22 v/v. The results provide insights into accelerating H2 uptake in solid-hydrate form and have potential applications in hydrate-based hydrogen storage.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Thermodynamics

Comparison of fluid production between excess-gas and excess-water hydrate-bearing sediments under depressurization and its implication on energy recovery

Jidong Zhang, Zhenyuan Yin, Qingping Li, Shuaijun Li, Yi Wang, Xiao-Sen Li

Summary: Methane hydrates are considered as a future energy source with abundant resources and high energy density. The fluid production and thermal response of two types of hydrate-bearing sediments (excess-gas and excess-water) under controlled depressurization are still unclear. This study examines the hydrate dissociation kinetics and fluid production behavior in these sediments to shed light on optimizing production strategies for future field production trials.

ENERGY (2023)

Article Engineering, Environmental

A metal-phenolic network-assembled nanotrigger evokes lethal ferroptosis via self-supply loop-based cytotoxic reactions

Xinping Zhang, Yuxin Guo, Xiaoyang Liu, Shun-Yu Wu, Ya-Xuan Zhu, Shao-Zhe Wang, Qiu-Yi Duan, Ke-Fei Xu, Zi-Heng Li, Xiao-Yu Zhu, Guang-Yu Pan, Fu-Gen Wu

Summary: This study develops a nanotrigger HCFT for simultaneous photodynamic therapy and light-triggered ferroptosis therapy. The nanotrigger can relieve tumor hypoxia, induce enhanced photodynamic reaction, and facilitate the continuation of Fenton reaction, ultimately leading to lethal ferroptosis in tumor cells.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

XAS and DFT investigation of atomically dispersed Cu/Co alloyed Pt local structures under selective hydrogenation of acetylene to ethylene

Olumide Bolarinwa Ayodele, Toyin Daniel Shittu, Olayinka S. Togunwa, Dan Yu, Zhen-Yu Tian

Summary: This study focused on the semihydrogenation of acetylene in an ethylene-rich stream using two alloyed Pt catalysts PtCu and PtCo. The PtCu catalyst showed higher activity and ethylene yield compared to PtCo due to its higher unoccupied Pt d-orbital density. This indicates that alloying Pt with Cu is more promising for industrial relevant SHA catalyst.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

A multifunctional emitter with synergistical adjustment of rigidity and flexibility for high-performance data-recording and organic light-emitting devices with hot exciton channel

Guowei Chen, Wen-Cheng Chen, Yaozu Su, Ruicheng Wang, Jia-Ming Jin, Hui Liang, Bingxue Tan, Dehua Hu, Shaomin Ji, Hao-Li Zhang, Yanping Huo, Yuguang Ma

Summary: This study proposes an intramolecular dual-locking design for organic luminescent materials, achieving high luminescence efficiency and performance for deep-blue organic light-emitting diodes. The material also exhibits unique mechanochromic luminescence behavior and strong fatigue resistance.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Cobalt/nickel purification by solvent extraction with ionic liquids in millifluidic reactors: From single-channel to numbered-up configuration with solvent recycle

Joren van Stee, Gregory Hermans, Jinu Joseph John, Koen Binnemans, Tom Van Gerven

Summary: This work presents a continuous solvent extraction method for the separation of cobalt and nickel in a millifluidic system using Cyphos IL 101 (C101) as the extractant. The optimal conditions for extraction performance and solvent properties were determined by investigating the effects of channel length, flow rate, and temperature. The performance of a developed manifold structure was compared to a single-channel system, and excellent separation results were achieved. The continuous separation process using the manifold structure resulted in high purity cobalt and nickel products.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Environment-triggered nanoagent with programmed gas release performance for accelerating diabetic infected wound healing

Yan Xu, Jingai Jiang, Xinyi Lv, Hui Li, Dongliang Yang, Wenjun Wang, Yanling Hu, Longcai Liu, Xiaochen Dong, Yu Cai

Summary: A programmed gas release nanoparticle was developed to address the challenges in treating diabetic infected wounds. It effectively removes drug-resistant pathogens and remodels the wound microenvironment using NO and H2S. The nanoparticle can eliminate bacteria and promote wound healing through antibacterial and anti-inflammatory effects.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Synergistic dopa-reinforced fluid hydrosol as highly efficient coal dust suppressant

Tong Xia, Zhilin Xi, Lianquan Suo, Chen Wang

Summary: This study investigated a highly efficient coal dust suppressant with low initial viscosity and high adhesion-solidification properties. The results demonstrated that the dust suppressant formed a network of multiple hydrogen bonding cross-linking and achieved effective adhesion and solidification of coal dust through various chemical reactions.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

First principle-based rate equation theory for the carbonation kinetics of CaO with CO2 in calcium looping

Jinzhi Cai, Zhenshan Li

Summary: A density functional theory-based rate equation was developed to predict the gas-solid reaction kinetics of CaO carbonation with CO2 in calcium looping. The negative activation energy of CaO carbonation close to equilibrium was accurately predicted through experimental validation.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Significant enhancement of high-temperature capacitive energy storage in dielectric films through surface self-assembly of BNNS coatings

Jianxiong Chen, Fuhao Ren, Ningning Yin, Jie Mao

Summary: This study presents an economically efficient and easily implementable surface modification approach to enhance the high-temperature electrical insulation and energy storage performance of polymer dielectrics. The self-assembly of high-insulation-performance boron nitride nanosheets (BNNS) on the film surface through electrostatic interactions effectively impedes charge injection from electrodes while promoting charge dissipation and heat transfer.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Medium entropy metal oxide induced *OH species targeted transfer strategy for efficient polyethylene terephthalate plastic recycling

Zijian Li, Zhaohui Yang, Shao Wang, Hongxia Luo, Zhimin Xue, Zhenghui Liu, Tiancheng Mu

Summary: This study reports a strategy for upgrading polyester plastics into value-added chemicals using electrocatalytic methods. By inducing the targeted transfer of *OH species, polyethylene terephthalate was successfully upgraded into potassium diformate with high purity. This work not only develops an excellent electrocatalyst, but also provides guidance for the design of medium entropy metal oxides.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

A novel environmental friendly and sustainable process for textile dyeing with sulphur dyes for cleaner production

Navneet Singh Shekhawat, Surendra Kumar Patra, Ashok Kumar Patra, Bamaprasad Bag

Summary: This study primarily focuses on developing a sulphur dyeing process at room temperature using bacterial Lysate, which is environmentally friendly, energy and cost effective, and sustainable. The process shows promising improvements in dye uptake and fastness properties.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Highly efficient and sustainable cationic polyvinyl chloride nanofibrous membranes for removal of E. coli and Cr (VI): Filtration and adsorption

Dengjia Shen, Hongyang Ma, Madani Khan, Benjamin S. Hsiao

Summary: This study developed cationic PVC nanofibrous membranes with high filtration and adsorption capability for the removal of bacteria and hexavalent chromium ions from wastewater. The membranes demonstrated remarkable performance in terms of filtration efficiency and maximum adsorption capacity. Additionally, modified nanofibrous membranes were produced using recycled materials and showed excellent retention rates in dynamic adsorption processes.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Concerted proton-coupled electron transfer promotes NiCoP nanowire arrays for efficient overall water splitting at industrial-level current density

Xiaoyan Wang, Zhikun Wang, Ben Jia, Chunling Li, Shuangqing Sun, Songqing Hu

Summary: Inspired by photosystem II, self-supported Fe-doped NiCoP nanowire arrays modified with carboxylate were constructed to boost industrial-level overall water splitting by employing the concerted proton-coupled electron transfer mechanism. The introduction of Fe and carboxyl ligand led to improved catalytic activity for HER and OER, and NCFCP@NF exhibited long-term durability for overall water splitting.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Self-limiting growth of thin dense LTA membranes boosts H2 gas separation performance

Pengyao Yu, Ge Yang, Yongming Chai, Lubomira Tosheva, Chunzheng Wang, Heqing Jiang, Chenguang Liu, Hailing Guo

Summary: Thin LTA zeolite membranes were prepared through secondary growth of nano LTA seeds in a highly reactive gel, resulting in membranes with superior permeability and selectivity in gas separation applications.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Prediction of phosphate adsorption amount, capacity and kinetics via machine learning: A generally physical-based process and proposed strategy of using descriptive text messages to enrich datasets

Baiqin Zhou, Huiping Li, Ziyu Wang, Hui Huang, Yujun Wang, Ruichun Yang, Ranran Huo, Xiaoyan Xu, Ting Zhou, Xiaochen Dong

Summary: The use of machine learning to predict the performance of specific adsorbents in phosphate adsorption shows great promise in saving time and revealing underlying mechanisms. However, the small size of the dataset and insufficient detailed information limits the model training process and the accuracy of results. To address this, the study employs a fuzzing strategy that replaces detailed numeric information with descriptive text messages on the physiochemical properties of adsorbents. This strategy allows the recovery of discarded samples with limited information, leading to accurate prediction of adsorption amount, capacity, and kinetics. The study also finds that phosphate uptake by adsorbents is generally through physisorption, with some involvement of chemisorption. The framework established in this study provides a practical approach for quickly predicting phosphate adsorption performance in urgent scenarios, using easily accessible information.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Absorption of hydrophobic volatile organic compounds in renewable vegetable oils and esterified fatty acids: Determination of gas-liquid partitioning coefficients as a function of temperature

Paula Alejandra Lamprea Pineda, Joren Bruneel, Kristof Demeestere, Lisa Deraedt, Tex Goetschalckx, Herman Van Langenhove, Christophe Walgraeve

Summary: This study evaluates the use of four esterified fatty acids and three vegetable oils as absorption liquids for hydrophobic VOCs. The experimental results show that isopropyl myristate is the most efficient liquid for absorbing the target VOCs.

CHEMICAL ENGINEERING JOURNAL (2024)