期刊
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
卷 30, 期 10, 页码 4489-4496出版社
KOREAN SOC MECHANICAL ENGINEERS
DOI: 10.1007/s12206-016-0916-9
关键词
Double-nut ball screw; Finite element method; Adjustable preload
The dynamic behavior of a double-nut ball screw was investigated by means of ABAQUS 6.13A (c) simulations based on a threedimensional model. The validity of the numerical model was demonstrated by comparing the simulation results obtained for the reaction force and torque acting on the flange of the nut with the experimental results. We found that the two sets of results deviated by no more than 5.87% given a screw rotating speed of 100 rpm. Simulations were performed to investigate the effects of the spacer width, screw rotating speed, steel ball radius and axial force on the torque acting on the nut flange. The results show that the torque increases with an increasing spacer width due to an increasing preload force. Moreover, the torque increases as the screw rotating speed increases to 700 rpm, but decreases at higher rotating speeds due to a greater centrifugal force. Ball wear prompts a reduction in the preload force and thus reduces disproportionately the torque acting on the flange following extended operation. For higher axial loads (> 100 N), the torque remains approximately constant during run-in (0.025 similar to 0.2 s). However, for lower loads, notable fluctuations in the torque occur.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据