Tribological performance of a cost-effective CrFeNiAl0.3Ti0.3 high entropy alloy based self-lubricating composite in a wide temperature range
出版年份 2022 全文链接
标题
Tribological performance of a cost-effective CrFeNiAl0.3Ti0.3 high entropy alloy based self-lubricating composite in a wide temperature range
作者
关键词
-
出版物
TRIBOLOGY INTERNATIONAL
Volume 174, Issue -, Pages 107743
出版商
Elsevier BV
发表日期
2022-06-25
DOI
10.1016/j.triboint.2022.107743
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process
- (2022) Jun Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Temperature-dependent tensile properties of ultrafine-grained C-doped CoCrFeMnNi high-entropy alloy
- (2022) Yan-Zhong Tian et al. RARE METALS
- Study of wear and friction properties of a Co-free CrFeNiAl0.4Ti0.2 high entropy alloy from 600 to 950 °C
- (2022) Cuong Nguyen et al. TRIBOLOGY INTERNATIONAL
- Mechanisms of remarkable wear reduction and evolutions of subsurface microstructure and nano-mechanical properties during dry sliding of nano-grained Ti6Al4V alloy: A comparative study
- (2022) Guanyu Deng et al. TRIBOLOGY INTERNATIONAL
- Mechanical behavior of high-entropy alloys
- (2021) Weidong Li et al. PROGRESS IN MATERIALS SCIENCE
- Effect of high pressure torsion process on the microhardness, microstructure and tribological property of Ti6Al4V alloy
- (2021) Guanyu Deng et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Tribological performances of CoCrFeNiAl high entropy alloy matrix solid-lubricating composites over a wide temperature range
- (2021) Yushan Geng et al. TRIBOLOGY INTERNATIONAL
- Effect of Mo Element on the Mechanical Properties and Tribological Responses of CoCrFeNiMox High-Entropy Alloys
- (2021) Ying Liu et al. Metals
- Excellent combination of compressive strength and ductility of (CoCrFeNi) (Co0.26Cr0.07Fe0.16Ni0.31Hf0.4) high-entropy alloys
- (2021) Tongbin Xie et al. MATERIALS & DESIGN
- Effects of oxidation on friction and wear properties of eutectic high-entropy alloy AlCoCrFeNi2.1
- (2021) Tri Dinh Vo et al. TRIBOLOGY INTERNATIONAL
- Effect of Al addition on the microstructure, mechanical and wear properties of TiZrNbHf refractory high entropy alloys
- (2021) Vipul Bhardwaj et al. TRIBOLOGY INTERNATIONAL
- A review on plastic deformation induced surface/interface roughening of sheet metallic materials
- (2021) Ning Nie et al. Journal of Materials Research and Technology-JMR&T
- A review of recent advances in tribology
- (2020) Yonggang Meng et al. Friction
- A novel Cu-doped high entropy alloy with excellent comprehensive performances for marine application
- (2020) Yuan Yu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- High-strength ultrafine-grained CoCrFeNiNb high-entropy alloy prepared by mechanical alloying: Properties and strengthening mechanism
- (2020) Filip Průša et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding
- (2020) Hao Liu et al. SURFACE & COATINGS TECHNOLOGY
- On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process
- (2020) Bosheng Dong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces
- (2020) Junwei Miao et al. TRIBOLOGY INTERNATIONAL
- Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers
- (2020) Yangchuan Cai et al. APPLIED SURFACE SCIENCE
- Nano-coupled heterostructure induced excellent mechanical and tribological properties in AlCoCrFeNi high entropy alloy
- (2020) Yushan Geng et al. TRIBOLOGY INTERNATIONAL
- Significant reduction in friction and wear of a high-entropy alloy via the formation of self-organized nanolayered structure
- (2020) Lu Yang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
- (2019) Peijian Shi et al. Nature Communications
- Microstructural evolution and wear performance of the high-entropy FeMnCoCr alloy/TiC/CaF2 self-lubricating composite coatings on copper prepared by laser cladding for continuous casting mold
- (2019) Jun Jiang et al. JOURNAL OF MATERIALS RESEARCH
- Characterizing deformation behaviour of an oxidized high speed steel: Effects of nanoindentation depth, friction and oxide scale porosity
- (2019) G.Y. Deng et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Microstructural feature and tribological behaviors of pyrolytic carbon-coated copper foam/carbon composite
- (2019) Pei Wang et al. JOURNAL OF MATERIALS SCIENCE
- Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix
- (2019) Dingshan Liang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding
- (2019) Hao Liu et al. OPTICS AND LASER TECHNOLOGY
- Tribological properties of nano/ultrafine-grained FeCoCrNiMnAlx high-entropy alloys over a wide range of temperatures
- (2019) Hu Cheng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Phase evolution, microstructure, and mechanical behaviors of the CrFeNiAlxTiy medium-entropy alloys
- (2019) Mengdi Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of expanded graphite with sodium metasilicate as lubricant at high temperature
- (2019) Long Wang et al. CARBON
- Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy
- (2019) Guanyu Deng et al. TRIBOLOGY INTERNATIONAL
- Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys
- (2018) Zhi-Sheng Nong et al. INTERMETALLICS
- Effect of Fe on microstructure, phase evolution and mechanical properties of (AlCoCrFeNi)100-xFex high entropy alloys processed by spark plasma sintering
- (2018) Lin Guo et al. INTERMETALLICS
- Wear behavior of Al0.6CoCrFeNi high-entropy alloys: Effect of environments
- (2018) Ming Chen et al. JOURNAL OF MATERIALS RESEARCH
- Fatigue behavior of CoCrFeMnNi high-entropy alloy under fully reversed cyclic deformation
- (2018) Y.Z. Tian et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Friction and wear Properties of Nanostripe-Inducing Structures in Vacuum Environment
- (2018) Y. Ando et al. WEAR
- Corrosive and tribological behaviors of AlCoCrFeNi-M high entropy alloys under 90 wt. % H2O2 solution
- (2018) Yuan Yu et al. TRIBOLOGY INTERNATIONAL
- Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys
- (2018) Yuan Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High temperature solid-lubricating materials: A review
- (2018) Shengyu Zhu et al. TRIBOLOGY INTERNATIONAL
- A novel CoCrFeNi high entropy alloy matrix self-lubricating composite
- (2017) Aijun Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Friction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment
- (2017) Jun Cheng et al. MATERIALS & DESIGN
- Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure
- (2017) S.J. Sun et al. MATERIALS & DESIGN
- Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite
- (2017) Aijun Zhang et al. MATERIALS & DESIGN
- Tribological Behavior of AlCoCrFeNi(Ti0.5) High Entropy Alloys under Oil and MACs Lubrication
- (2016) Yuan Yu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Influence of Cr-Rich Oxide Scale on Sliding Wear Mechanism of Ferritic Stainless Steel at High Temperature
- (2016) Xiawei Cheng et al. TRIBOLOGY LETTERS
- Ultrafine-Grained AlCoCrFeNi2.1Eutectic High-Entropy Alloy
- (2016) I. S. Wani et al. Materials Research Letters
- Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization
- (2015) Zhi Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Elevated temperature tribology of cobalt and tantalum-based alloys
- (2015) T.W. Scharf et al. WEAR
- Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures
- (2013) Woei-Ren Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
- (2011) Ming-Hao Chuang et al. ACTA MATERIALIA
- On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys
- (2011) Chin-You Hsu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now