A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %

All-perovskite tandem solar cells with improved grain surface passivation

(2022) Renxing Lin et al.   NATURE

Stoichiometric Dissolution of Defective CsPbI 2 Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

(2022) Xinyi Liu et al.   Advanced Energy Materials

Perovskite–organic tandem solar cells with indium oxide interconnect

(2022) K. O. Brinkmann et al.   NATURE

Dopant‐Free Polymer HTM‐Based CsPbI 2 Br Solar Cells with Efficiency Over 17% in Sunlight and 34% in Indoor Light

(2021) Zhanglin Guo et al.   ADVANCED FUNCTIONAL MATERIALS

Tuning of the Interconnecting Layer for Monolithic Perovskite/Organic Tandem Solar Cells with Record Efficiency Exceeding 21%

(2021) Pang Wang et al.   NANO LETTERS

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

(2021) Teoman Ozturk et al.   Nano Energy

Surface Reconstruction for Stable Monolithic All‐Inorganic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency

(2021) Weijie Chen et al.   ADVANCED FUNCTIONAL MATERIALS

Donor–Acceptor Type Polymer Bearing Carbazole Side Chain for Efficient Dopant‐Free Perovskite Solar Cells

(2021) Guofeng You et al.   Advanced Energy Materials

Spontaneous Construction of Multidimensional Heterostructure Enables Enhanced Hole Extraction for Inorganic Perovskite Solar Cells to Exceed 20% Efficiency

(2021) Shiang Zhang et al.   Advanced Energy Materials

Dopant‐Free Organic Hole‐Transporting Material for Efficient and Stable Inverted All‐Inorganic and Hybrid Perovskite Solar Cells

(2020) Kui Jiang et al.   ADVANCED MATERIALS

From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules

(2020) Sean P. Dunfield et al.   Advanced Energy Materials

18% Efficiency organic solar cells

(2020) Qishi Liu et al.   Science Bulletin

Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

(2020) Yong Cui et al.   ADVANCED MATERIALS

D–A Copolymer Donor Based on Bithienyl Benzodithiophene D-Unit and Monoalkoxy Bifluoroquinoxaline A-Unit for High-Performance Polymer Solar Cells

(2020) Chenkai Sun et al.   CHEMISTRY OF MATERIALS

Precursor Engineering for Ambient‐Compatible Antisolvent‐Free Fabrication of High‐Efficiency CsPbI 2 Br Perovskite Solar Cells

(2020) Chenyang Duan et al.   Advanced Energy Materials

High‐Efficiency CsPbI 2 Br Perovskite Solar Cells with Dopant‐Free Poly(3‐hexylthiophene) Hole Transporting Layers

(2020) Ming‐Hua Li et al.   Advanced Energy Materials

Lead(II) Propionate Additive and a Dopant-Free Polymer Hole Transport Material for CsPbI2Br Perovskite Solar Cells

(2020) Senol Öz et al.   ACS Energy Letters

Spatial Distribution Recast for Organic Bulk Heterojunctions for High‐Performance All‐Inorganic Perovskite/Organic Integrated Solar Cells

(2020) Weijie Chen et al.   Advanced Energy Materials

Efficient monolithic perovskite/organic tandem solar cells and their efficiency potential

(2020) Shenkun Xie et al.   Nano Energy

Arylammonium-Assisted Reduction of the Open-Circuit Voltage Deficit in Wide-Bandgap Perovskite Solar Cells: The Role of Suppressed Ion Migration

(2020) Cong Chen et al.   ACS Energy Letters

High‐Efficiency Solution‐Processed Two‐Terminal Hybrid Tandem Solar Cells Using Spectrally Matched Inorganic and Organic Photoactive Materials

(2020) Havid Aqoma et al.   Advanced Energy Materials

Constructing highly efficient all-inorganic perovskite solar cells with efficiency exceeding 17% by using dopant-free polymeric electron-donor materials

(2020) Junjie Ma et al.   Nano Energy

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

(2020) Amran Al-Ashouri et al.   SCIENCE

Graded heterojunction of perovskite/dopant-free polymeric hole-transport layer for efficient and stable metal halide perovskite devices

(2020) Zijia Li et al.   Nano Energy

Surface Engineering of Ambient-Air-Processed Cesium Lead Triiodide Layers for Efficient Solar Cells

(2020) So Me Yoon et al.   Joule

Dual Interfacial Design for Efficient CsPbI 2 Br Perovskite Solar Cells with Improved Photostability

(2019) Jingjing Tian et al.   ADVANCED MATERIALS

A two-terminal all-inorganic perovskite/organic tandem solar cell

(2019) Qiang Zeng et al.   Science Bulletin

Expanding the Light Harvesting of CsPbI2Br to Near Infrared by Integrating with Organic Bulk Heterojunction for Efficient and Stable Solar Cells

(2019) Qiang Guo et al.   ACS Applied Materials & Interfaces

Carrier Extraction from Perovskite to Polymeric Charge Transport Layers Probed by Ultrafast Transient Absorption Spectroscopy

(2019) Esma Ugur et al.   Journal of Physical Chemistry Letters

Polymer-Passivated Inorganic Cesium Lead Mixed-Halide Perovskites for Stable and Efficient Solar Cells with High Open-Circuit Voltage over 1.3 V

(2018) Qingsen Zeng et al.   ADVANCED MATERIALS

A low cost and high performance polymer donor material for polymer solar cells

(2018) Chenkai Sun et al.   Nature Communications

Less is More: Dopant-Free Hole Transporting Materials for High-Efficiency Perovskite Solar Cells

(2018) Weiqi Zhou et al.   Advanced Energy Materials

Precursor Engineering for All-Inorganic CsPbI2 Br Perovskite Solar Cells with 14.78% Efficiency

(2018) Guannan Yin et al.   ADVANCED FUNCTIONAL MATERIALS

High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells

(2018) Qifeng Han et al.   SCIENCE

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21%

(2018) Lei Meng et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Unveiling the Crystal Formation of Cesium Lead Mixed-Halide Perovskites for Efficient and Stable Solar Cells

(2017) Jae Keun Nam et al.   Journal of Physical Chemistry Letters

A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells

(2017) Yi Hou et al.   SCIENCE

Interface Engineering for Highly Efficient and Stable Planar p-i-n Perovskite Solar Cells

(2017) Yang Bai et al.   Advanced Energy Materials

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells

(2017) Lijian Zuo et al.   Science Advances

Rational Strategies for Efficient Perovskite Solar Cells

(2016) Jangwon Seo et al.   ACCOUNTS OF CHEMICAL RESEARCH

Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells

(2016) Rachel E. Beal et al.   Journal of Physical Chemistry Letters

Tabulated values of the Shockley–Queisser limit for single junction solar cells

(2016) Sven Rühle   SOLAR ENERGY

Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys

(2015) Zhen Li et al.   CHEMISTRY OF MATERIALS

Visible light-driven novel g-C3N4/NiFe-LDH composite photocatalyst with enhanced photocatalytic activity towards water oxidation and reduction reaction

(2015) Susanginee Nayak et al.   Journal of Materials Chemistry A

Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor

(2014) Seungchan Ryu et al.   Energy & Environmental Science

Femtosecond Time-Resolved Transient Absorption Spectroscopy of CH3NH3PbI3 Perovskite Films: Evidence for Passivation Effect of PbI2

(2014) Lili Wang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Band filling with free charge carriers in organometal halide perovskites

(2014) Joseph S. Manser et al.   Nature Photonics

Accounting for Interference, Scattering, and Electrode Absorption to Make Accurate Internal Quantum Efficiency Measurements in Organic and Other Thin Solar Cells

(2010) George F. Burkhard et al.   ADVANCED MATERIALS