Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction

Laser shock peening (LSP), a surface modification technique, is promising to enhance the strength and wear resistance for Ni-based superalloys. To understand the strengthening mechanism in a laser shock peened Ni-based superalloy DZ417G, we utilize synchrotron poly- and monochromatic X-ray microdiffraction, as well as electron microscopy and microhardness to quantify the local microstructures and mechanical properties at various depths. In the 1.2-mm-deep hardened layer, the microhardness increases monotonically by -50% from the unaffected interior to the surface. Quantitative microdiffraction analysis shows that large amounts of dislocations are introduced by LSP. High densities of 7.1 x 1015 m-2 and 11.8 x 1015 m-2 are seen close to the peened surface for the c- and c0-phases, respectively, which are 5 and 20 times of those in the unaffected region. Different gradients of dislocation density are observed for the two phases from interior to surface, and their combined effect accounts well for the hardness increment. Due to the unaltered c0-precipitates and chemical composition in the LSP affected zone, the large density of dislocations dominates the observed strengthening. Combined polyand monochromatic X-ray microdiffraction allows quantifying the local microstructures of plastic deformation over a large sampling scale that can hardly be achieved using other materials characterization techniques. (c) 2022 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).

Automated summary

Laser shock peening is a surface modification technique that can enhance the strength and wear resistance of Ni-based superalloys. This study used synchrotron X-ray microdiffraction, electron microscopy, and microhardness to investigate the microstructures and mechanical properties of a laser shock peened Ni-based superalloy. The results showed that the introduction of dislocations through laser shock peening increased the microhardness of the alloy, and the density of dislocations played a dominant role in the observed strengthening.