Solid-state alloying of Al-Mg alloys by accumulative roll-bonding: Microstructure and properties

Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al-Zn-Mg alloy

(2021) Peng Zhang et al.   ACTA MATERIALIA

Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al–Mg alloys

(2021) W. Xu et al.   SCIENCE

An improved modelling framework for strength and work hardening of precipitate strengthened Al–Mg–Si alloys

(2021) Feng Lu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system

(2020) Yang Li et al.   ACTA MATERIALIA

Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review

(2020) Qun Luo et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

(2020) Ruidi Li et al.   ACTA MATERIALIA

Effect of annealing temperature on microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn-Sc-Zr alloy

(2020) Zhongqin Tang et al.   APPLIED SURFACE SCIENCE

Enhancing the intergranular corrosion resistance of high Mg‐alloyed Al–Mg alloy by Y addition

(2020) Xinlei Li et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Thermodynamic prediction of martensitic transformation temperature in Fe-Ni-C system

(2020) Qun Luo et al.   SCRIPTA MATERIALIA

Enhanced strengthening of Al–SiC nanocomposites containing a uniform dispersion of dense nanoparticles fabricated by a hybrid accumulative roll-bonding process

(2020) X.M. Mei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nondestructive tests on the effect of Mg content on the corrosion and mechanical properties of 5000 series aluminum alloys

(2020) Yu-Chih Tzeng et al.   MATERIALS CHEMISTRY AND PHYSICS

Evolution of texture, microstructure, tensile strength and corrosion properties of annealed Al–Mg–Sc–Zr alloys

(2020) Hongjie Fang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring the formation of twins in Al by introducing epitaxial layer interfaces

(2020) S.C. Xue et al.   SCRIPTA MATERIALIA

Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

(2019) Wenwen Sun et al.   SCIENCE

Mechanical properties, corrosion behavior, and microstructure of Sr modified Al–9.2Mg–0.7Mn alloys

(2019) Peng Zhang et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation

(2019) Xinyu Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of electrode potential on stress corrosion cracking in highly sensitized Al–Mg alloys

(2019) M.E. McMahon et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High corrosion resistance and strain hardening of high Mg Al-alloy with Er and Zr by using a new reverse stabilization process

(2019) Yusheng Ding et al.   SCRIPTA MATERIALIA

Solid-state cold spraying of Ti and its alloys: A literature review

(2019) Wenya Li et al.   PROGRESS IN MATERIALS SCIENCE

Effects of Ag on the age hardening response and intergranular corrosion resistance of Al-Mg alloys

(2018) Cheng Guo et al.   MATERIALS CHARACTERIZATION

Significant strengthening in superlight Al-Mg alloy with an exceptionally large amount of Mg (13 wt%) after cold rolling

(2018) D.H. Jang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Through-thickness inhomogeneity of environmentally assisted cracking (EAC) in AA5083-H128 alloy

(2018) Wenbin Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion

(2018) Yang Liu et al.   SCRIPTA MATERIALIA

In-situ investigation of deformation behavior and fracture mechanism of laminated Al/Ti composites fabricated by hot rolling

(2018) Xiaobo Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of copper additions on materials properties and corrosion behaviour of Al–Mg alloy sheet

(2017) Olaf Engler et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Low-alloy-correlated reversal of the precipitation sequence in Al-Mg-Si alloys

(2017) Y.X. Lai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical and corrosion properties of AA5083 alloy sheets produced by accumulative roll bonding (ARB) and conventional cold rolling (CR)

(2017) Ana Alil et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Ordered stacking faults within nanosized silicon precipitates in aluminum alloy

(2017) Dong Yue Xie et al.   MATERIALS LETTERS

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium

(2017) Sichuang Xue et al.   Nature Communications

Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding

(2016) S.O. Gashti et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Preparation of Al 2 O 3 /TiO 2 particle-reinforced copper through plasma spraying and friction stir processing

(2016) Chao Li et al.   MATERIALS & DESIGN

Influence of annealing temperature on the baking response and corrosion properties of an Al–4.6wt% Mg alloy with 0.54wt% Cu

(2015) Ana Alil et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

(2013) Kaka Ma et al.   ACTA MATERIALIA

Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility

(2013) G. Liu et al.   NATURE MATERIALS

Investigation of microstructure and mechanical properties of Cu–SiCP composite produced by continual annealing and roll-bonding process

(2012) Omid Ghaderi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing

(2011) Sergiy V. Divinski et al.   ACTA MATERIALIA

A molecular dynamics study of self-diffusion in the cores of screw and edge dislocations in aluminum

(2009) G.P. Purja Pun et al.   ACTA MATERIALIA

Recovery kinetics in the presence of precipitates: The softening response of an Al–Mg–Sc alloy

(2009) R. Roumina et al.   ACTA MATERIALIA

Effect of high magnetic field on the primary dendrite arm spacing and segregation of directionally solidified superalloy DZ417G

(2009) Tao Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modeling the effect of Al3Sc precipitates on the yield stress and work hardening of an Al–Mg–Sc alloy

(2008) F. Fazeli et al.   ACTA MATERIALIA

Effect of Nano-Scale Precipitates Growth on the Deformation Behavior of the Cast Coarse-Grained Al-Cu Alloy

(2008) W. Zhao et al.   ADVANCED ENGINEERING MATERIALS

Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process

(2008) M EIZADJOU et al.   COMPOSITES SCIENCE AND TECHNOLOGY