Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)

Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments

(2022) Kaifur Rashed et al.   RAPID PROTOTYPING JOURNAL

Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

(2021) Chrysoula Pandelidi et al.   RAPID PROTOTYPING JOURNAL

The Extent of Interlayer Bond Strength during Fused Filament Fabrication of Nylon Copolymers: An Interplay between Thermal History and Crystalline Morphology

(2021) Dries Vaes et al.   Polymers

Investigation of in-situ chemical cross-linking during fused filament fabrication process on parts shrinkage reduction and interlayer adhesion

(2021) Harini Bhuvaneswari Gunasekaran et al.   Journal of Materials Research and Technology-JMR&T

Thermal and geometry impacts on the structure and mechanical properties of part produced by polymer additive manufacturing

(2020) Sébastien Charlon et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Parameters Influencing the Outcome of Additive Manufacturing of Tiny Medical Devices Based on PEEK

(2020) Yiqiao Wang et al.   Materials

Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling

(2020) David Moises Baca Lopez et al.   Polymers

Temperature and Time Dependence of the Solvent-Induced Crystallization of Poly(l-lactide)

(2020) Mahitha Udayakumar et al.   Polymers

Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction

(2020) Kang-jie Cheng et al.   Journal of the Mechanical Behavior of Biomedical Materials

Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid

(2020) Bandar Aloyaydi et al.   POLYMER TESTING

Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships

(2020) Ali Reza Zanjanijam et al.   Polymers

Thermo-rheological effects on successful 3D printing of biodegradable polyesters

(2020) María Virginia Candal et al.   Additive Manufacturing

Electrical behavior of a graphene/PEKK and carbon black/PEKK nanocomposites in the vicinity of the percolation threshold

(2019) C. Bessaguet et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling

(2019) Xinzhou Zhang et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture

(2019) Miguel Ángel Caminero et al.   Polymers

On the thermal processing and mechanical properties of 3D-printed polyether ether ketone

(2019) Russell Wang et al.   MRS Communications

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

(2019) Carlos M.S. Vicente et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup

(2019) Josef Kiendl et al.   COMPOSITES PART B-ENGINEERING

Additive layer manufacturing of poly (ether ether ketone) via FDM

(2018) Marianna Rinaldi et al.   COMPOSITES PART B-ENGINEERING

Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing

(2018) Radoslaw A. Wach et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends

(2018) Gianluca Cicala et al.   Materials

A study of creep in polycarbonate fused deposition modelling parts

(2018) Antonio G. Salazar-Martín et al.   MATERIALS & DESIGN

A more reliable DSC-based methodology to study crystallization kinetics: Application to poly(ether ketone ketone) (PEKK) copolymers

(2018) Tanguy Choupin et al.   POLYMER

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Isothermal crystallization kinetic modeling of poly(etherketoneketone) (PEKK) copolymer

(2017) T. Choupin et al.   POLYMER

Residual stress measurement in Fused Deposition Modelling parts

(2017) Caterina Casavola et al.   POLYMER TESTING

Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method

(2016) Xinhua Liu et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Morphology and dynamical mechanical properties of poly ether ketone ketone (PEKK) with meta phenyl links

(2016) Luis Quiroga Cortés et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

(2015) Wenzheng Wu et al.   Materials

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

(2015) Omar A. Mohamed et al.   Advances in Manufacturing

Raster angle mechanics in fused deposition modelling

(2014) Bin Huang et al.   JOURNAL OF COMPOSITE MATERIALS

Experimental investigation of FDM process for improvement of mechanical properties and production cost

(2014) Ismail Durgun et al.   RAPID PROTOTYPING JOURNAL

Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30

(2013) Dario Croccolo et al.   COMPUTATIONAL MATERIALS SCIENCE

Parametric appraisal of mechanical property of fused deposition modelling processed parts

(2009) Anoop Kumar Sood et al.   MATERIALS & DESIGN

A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis

(2008) Y Zhang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL