标题
A review on sintering and mechanical processing of 3Y-ZTP zirconia ceramics
作者
关键词
-
出版物
CERAMICS INTERNATIONAL
Volume -, Issue -, Pages -
出版商
Elsevier BV
发表日期
2022-10-22
DOI
10.1016/j.ceramint.2022.10.159
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Zirconia Responses to Edge Chipping Damage Induced in Conventional and Ultrasonic Vibration-Assisted Diamond Machining
- (2021) Afifah Z. Juri et al. Journal of Materials Research and Technology-JMR&T
- Nano-scale mechanical behaviors and material removal mechanisms of zirconia ceramics sintered at various temperatures
- (2021) Min Ji et al. CERAMICS INTERNATIONAL
- Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics
- (2021) Min Ji et al. Journal of Manufacturing Processes
- Investigation of material removal mechanisms and ductile-brittle transition zone of zirconia ceramics sintered at various temperatures
- (2021) Min Ji et al. Journal of the Mechanical Behavior of Biomedical Materials
- Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites
- (2021) Üsame Ali Usca et al. Journal of Materials Research and Technology-JMR&T
- Mechanical and optical properties evaluation of rapid sintered dental zirconia
- (2020) Chun-Chuan Yang et al. CERAMICS INTERNATIONAL
- Optimization of two-step sintering conditions of zirconia blanks for dental restorations
- (2020) Jonathan Grech et al. CERAMICS INTERNATIONAL
- A comprehensive review of electric discharge machining of advanced ceramics
- (2020) Wuyi Ming et al. CERAMICS INTERNATIONAL
- Study and characterization of the ductile-brittle transition zone in sintered zirconia
- (2020) Anandita Singh et al. Journal of Manufacturing Processes
- Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics
- (2019) Min Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Predicting subsurface damage in silicon nitride ceramics subjected to rotary ultrasonic assisted face grinding
- (2019) Mohammad Baraheni et al. CERAMICS INTERNATIONAL
- Effects of laser-assisted grinding on surface integrity of zirconia ceramic
- (2019) Zhelun Ma et al. CERAMICS INTERNATIONAL
- System design and experimental research on ultrasonic assisted elliptical vibration grinding of Nano-ZrO2 ceramics
- (2019) Bo Zhao et al. CERAMICS INTERNATIONAL
- Zirconia in dental prosthetics: A literature review
- (2019) Jonathan Grech et al. Journal of Materials Research and Technology-JMR&T
- Machinability of a newly developed pre-sintered zirconia block for dental crown applications
- (2019) Noor Faeizah Amat et al. MATERIALS LETTERS
- The effects of dry and wet grinding on the strength of dental zirconia
- (2018) C.M.B. Ho et al. CERAMICS INTERNATIONAL
- Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications
- (2018) E. Camposilvan et al. DENTAL MATERIALS
- Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns
- (2018) J.F. Esquivel-Upshaw et al. JOURNAL OF DENTISTRY
- Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode
- (2018) Meinam Annebushan Singh et al. Journal of Mechanical Science and Technology
- Effect of thickness and surface modifications on flexural strength of monolithic zirconia
- (2018) Fusun Ozer et al. JOURNAL OF PROSTHETIC DENTISTRY
- Surface characterization of zirconia ceramics in ultrasonic vibration-assisted grinding
- (2018) Zhihua Li et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Effect of grinding on subsurface modifications of pre-sintered zirconia under different cooling and lubrication conditions
- (2018) P. Suya Prem Anand et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations
- (2018) Gabriel K.R. Pereira et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation on mechanical properties and microstructure of silicon nitride ceramics fabricated by spark plasma sintering
- (2018) Liyan Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental Set Up to Improve Machining Performance of Silicon Dioxide (Quartz) in Magnetic Field Assisted TW-ECSM Process
- (2018) Nav Rattan et al. Silicon
- Load-bearing capacity of lithium disilicate and ultra-translucent zirconias
- (2018) Jing Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN, RSM, and GA optimization
- (2018) Aissa Laouissi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Densification behavior of yttria-stabilized zirconia powders for solid oxide fuel cell electrolytes
- (2018) Dhruba Panthi et al. Journal of Advanced Ceramics
- A study on the tool wear of PCD micro end mills in ductile milling of ZrO2 ceramics
- (2017) Rong Bian et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions
- (2017) Min Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Grain growth during spark plasma and flash sintering of ceramic nanoparticles: a review
- (2017) Rachman Chaim et al. JOURNAL OF MATERIALS SCIENCE
- Influence of aging on flexural strength of translucent zirconia for monolithic restorations
- (2017) Brian D. Flinn et al. JOURNAL OF PROSTHETIC DENTISTRY
- Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes
- (2017) Abdur-Rasheed Alao et al. Journal of the Mechanical Behavior of Biomedical Materials
- Study on grinding of pre-sintered zirconia using diamond wheel
- (2017) P. Suya Prem Anand et al. MATERIALS AND MANUFACTURING PROCESSES
- Milling properties of low temperature sintered zirconia blocks for dental use
- (2017) Ting-Hsun Lan et al. Materials Science & Engineering C-Materials for Biological Applications
- Direct selective laser sintering and melting of ceramics: a review
- (2017) Swee Leong Sing et al. RAPID PROTOTYPING JOURNAL
- Review of zirconia-based bioceramic: Surface modification and cellular response
- (2016) Ginny Soon et al. CERAMICS INTERNATIONAL
- Precise micromachining of yttria-tetragonal zirconia polycrystal ceramic using 532 nm nanosecond laser
- (2016) Jian Li et al. CERAMICS INTERNATIONAL
- Zirconia based dental ceramics: structure, mechanical properties, biocompatibility and applications
- (2016) Chandkiram Gautam et al. DALTON TRANSACTIONS
- Assessment of Elasticity, Plasticity and Resistance to Machining-induced Damage of Porous Pre-sintered Zirconia Using Nanoindentation Techniques
- (2016) Abdur-Rasheed Alao et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Friction and wear performance on ultrasonic vibration assisted grinding dental zirconia ceramics against natural tooth
- (2016) Kan Zheng et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Colloidal processing of fully stabilized zirconia laminates comprising graphene oxide-enriched layers
- (2016) Acacio Rincón et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fatigue behavior of Y-TZP ceramic after surface treatments
- (2016) Marina Amaral et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging
- (2016) G.K.R. Pereira et al. Materials Science & Engineering C-Materials for Biological Applications
- Arc-Enhanced Plasma Machining Technology for High Efficiency Machining of Silicon Carbide
- (2016) Baolu Shi et al. PLASMA CHEMISTRY AND PLASMA PROCESSING
- Detecting the key geometrical features and grades of carbide inserts for the turning of nickel-based alloys concerning surface integrity
- (2016) A Fernández-Valdivielso et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Flash sintering of ceramic materials
- (2016) C E J Dancer Materials Research Express
- Ultrafast-Contactless Flash Sintering using Plasma Electrodes
- (2016) Theo Saunders et al. Scientific Reports
- Research on normal contact stiffness of rough surface considering friction based on fractal theory
- (2015) Peng Liu et al. APPLIED SURFACE SCIENCE
- Toughening effect of multiwall carbon nanotubes on 3Y-TZP zirconia ceramics at cryogenic temperatures
- (2015) Weiwei Wu et al. CERAMICS INTERNATIONAL
- A contribution in EDM simulation field
- (2015) Adnene Tlili et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparison of Contrast Ratio, Translucency Parameter, and Flexural Strength of Traditional and “Augmented Translucency” Zirconia for CEREC CAD/CAM System
- (2015) Alessandro Vichi et al. Journal of Esthetic and Restorative Dentistry
- Critical influence of alumina content on the low temperature degradation of 2–3mol% yttria-stabilized TZP for dental restorations
- (2015) F. Zhang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Nanoindentation characterization of the elasticity, plasticity and machinability of zirconia
- (2015) Abdur-Rasheed Alao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrasonic vibration–assisted electric discharge machining: A research review
- (2015) Bharat C Khatri et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Finite-Volume Heat Transfer Model of the Nano Electrical Discharge Machining Process
- (2015) Younes Tahmasebipour et al. Journal of Nanoelectronics and Optoelectronics
- Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics
- (2014) Xingzhi Xiao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue resistance of CAD/CAM complete crowns with a simplified cementation process
- (2014) Adriana O. Carvalho et al. JOURNAL OF PROSTHETIC DENTISTRY
- Grinding Model and Material Removal Mechanism of Medical Nanometer Zirconia Ceramics
- (2014) Dongkun Zhang et al. Recent Patents on Nanotechnology
- Long-time aging in 3mol.% yttria-stabilized tetragonal zirconia polycrystals at human body temperature
- (2013) Melanie Keuper et al. Acta Biomaterialia
- High performance grinding of zirconium oxide (ZrO 2 ) using hybrid bond diamond tools
- (2013) Mohammad Rabiey et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fracture toughness and hardness of a Y-TZP dental ceramic after mechanical surface treatments
- (2013) Tonino Traini et al. Clinical Oral Investigations
- The heating of polymer composites by electromagnetic induction – A review
- (2013) Thomas Bayerl et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials
- (2013) Chenglong Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- ULTRASONIC MACHINING—A COMPREHENSIVE REVIEW
- (2013) Jatinder Kumar MACHINING SCIENCE AND TECHNOLOGY
- Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency
- (2013) Mi-Jin Kim et al. Journal of Advanced Prosthodontics
- Current status of zirconia restoration
- (2013) Takashi Miyazaki et al. Journal of Prosthodontic Research
- Master sintering curves of two different alumina powder compacts
- (2013) Vaclav Pouchly et al. Processing and Application of Ceramics
- The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio
- (2012) Bogna Stawarczyk et al. Clinical Oral Investigations
- A predictive model of the critical undeformed chip thickness for ductile–brittle transition in nano-machining of brittle materials
- (2012) Muhammad Arif et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Passivity of fit of CAD/CAM and copy-milled frameworks, veneered frameworks, and anatomically contoured, zirconia ceramic, implant-supported fixed prostheses
- (2012) Matthias Karl et al. JOURNAL OF PROSTHETIC DENTISTRY
- Microstructural changes in 3Y-TZP induced by scratching and indentation
- (2012) J.A. Muñoz-Tabares et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Performance of Dental Ceramics: Challenges for Improvements
- (2011) E.D. Rekow et al. JOURNAL OF DENTAL RESEARCH
- Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters
- (2011) Jong-Do Kim et al. Journal of Mechanical Science and Technology
- Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping
- (2011) Marco Cologna et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Microwave versus conventional sintering: A review of fundamentals, advantages and applications
- (2010) Morteza Oghbaei et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Zirconia Dental Implants: A Literature Review
- (2010) Zeynep Özkurt et al. Journal of Oral Implantology
- Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process
- (2010) Zuhair A. Munir et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Ceramics for Dental Applications: A Review
- (2010) Isabelle Denry et al. Materials
- Numerical evaluation of transient thermal loads on a WEDM wire electrode under spatially random multiple discharge conditions with and without clustering of sparks
- (2009) Simul Banerjee et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content
- (2009) A. Nevarez-Rascon et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Effect of Varying Displacement Rates on the Densification of Nanostructured Zirconia by Current Activation
- (2009) Jin Xu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends
- (2009) Jérôme Chevalier et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Laser machining of structural ceramics—A review
- (2009) Anoop N. Samant et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Consolidation/synthesis of materials by electric current activated/assisted sintering
- (2009) Roberto Orrù et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Ultraprecision surface finishing of nano-ZrO2 ceramics using two-dimensional ultrasonic assisted grinding
- (2008) Yan Yanyan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A numerical model of the EDM process considering the effect of multiple discharges
- (2008) B. Izquierdo et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Research on the surface characteristics in ultrasonic grinding nano-zirconia ceramics
- (2008) G.F. Gao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Synchrotron X-Ray Study of the Crystal Structure and Hydrothermal Degradation of Yttria-Stabilized Tetragonal Zirconia Polycrystal
- (2008) Isao Yamashita et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering
- (2008) Mehdi Mazaheri et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Prediction and control of microstructure evolution for sub-microscale α-Al2O3 during low-heating-rate sintering based on the master sintering curve theory
- (2008) W.Q. Shao et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Numerical simulation of single pulse discharge machining insulating Al2O3 ceramic
- (2008) Y H Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of manganese oxide on the sintered properties and low temperature degradation of Y-TZP ceramics
- (2007) S. Ramesh et al. CERAMICS INTERNATIONAL
- State of the art of zirconia for dental applications
- (2007) I DENRY et al. DENTAL MATERIALS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now