标题
Research Progress of Alumina-Forming Austenitic Stainless Steels: A Review
作者
关键词
-
出版物
Materials
Volume 15, Issue 10, Pages 3515
出版商
MDPI AG
发表日期
2022-05-13
DOI
10.3390/ma15103515
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Creep behaviors of Fe-18Ni-12Cr based alumina-forming austenitic steels with ultralow carbon
- (2021) Man Wang et al. Journal of Materials Science
- Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells
- (2021) Lingfeng Zhou et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Analysis of the elevated temperature deformation mechanisms and grain boundary strengthening of the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al
- (2021) Andrew Peterson et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The formation mechanism, growth, and effect on the mechanical properties of precipitate free zones in the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al during creep
- (2021) Andrew Peterson et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reason for negative effect of Nb addition on oxidation resistance of alumina-forming austenitic stainless steel at 1323 K
- (2021) Lin Shen et al. CORROSION SCIENCE
- Effect of Cu addition on microstructure and properties of Fe–20Ni–14Cr alumina-forming austenitic steel
- (2021) Qiuzhi Gao et al. INTERMETALLICS
- Microstructure and mechanical property evolution of an AFA alloy with simple composition design during ageing at 700 °C
- (2020) Lingzhi Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel
- (2020) Lingzhi Chen et al. Materials Research Express
- The precipitation control in aged alumina-forming austenitic stainless steels Fe-15Cr-25Ni-3Al-NbWCu by W addition and its effect on the mechanical properties
- (2020) Haojie Meng et al. MATERIALS CHARACTERIZATION
- Microstructure influence on creep properties of heat-resistant austenitic alloys with high aluminum content
- (2020) A. Facco et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Systematic Investigation of Precipitates in Matrix and at Grain Boundaries in an Alumina-Forming Austenitic Steel During Creep Testing at 700 °C
- (2020) Hongyuan Wen et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Oxidation behavior and microstructure evolution of alumina-forming austenitic & high entropy alloys in steam environment at 1200 °C
- (2020) Hao Shi et al. CORROSION SCIENCE
- High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: effect of cold rolling
- (2020) Qiuzhi Gao et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and Mechanical Properties of 4Al Alumina-Forming Austenitic Steel after Cold-Rolling Deformation and Annealing
- (2020) Chenchen Jiang et al. Materials
- Corrosion behaviour of Al-added high Mn austenitic steels in molten lead bismuth eutectic with saturated and low oxygen concentrations at 450 ℃
- (2020) Haoran Wang et al. CORROSION SCIENCE
- How big is the difference between precipitation at twin boundary and normal grain boundary in an alumina-forming austenitic steel during creep at 700 °C?
- (2020) Hongyuan Wen et al. MATERIALS LETTERS
- The effect of isothermal aging on creep behavior of modified 2.5Al alumina-forming austenitic steel
- (2020) Jundong Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Early segregation and precipitation at triple junction in an alumina-forming austenitic steel
- (2020) Hongyuan Wen et al. MATERIALS LETTERS
- Creep behavior of an alumina-forming austenitic steel with simple alloy design
- (2020) Man Wang et al. Materials Today Communications
- Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning
- (2020) B.C. Zhou et al. ACTA MATERIALIA
- Microstructural evolution of Fe–20Cr–30Ni–2Nb–5Al AFA steel during creep at 760 °C
- (2020) Andrew Peterson et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of isothermal aging on microstructure and mechanical behavior of modified 2.5Al alumina-forming austenitic steel
- (2019) Yujiao Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation of alumina-forming austenitic steel: EBSD study and flow behavior
- (2019) Qiuzhi Gao et al. JOURNAL OF MATERIALS SCIENCE
- Modern data analytics approach to predict creep of high-temperature alloys
- (2019) D. Shin et al. ACTA MATERIALIA
- EBSD analysis and mechanical properties of alumina-forming austenitic steel during hot deformation and annealing
- (2019) Ziyun Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Composition Optimum Design and Strengthening and Toughening Mechanisms of New Alumina-Forming Austenitic Heat-Resistant Steels
- (2019) Nan Dong et al. Metals
- Preferential growth of coherent precipitates at grain boundary
- (2019) Hongyuan Wen et al. MATERIALS LETTERS
- Design of alumina-forming austenitic stainless steel using genetic algorithms
- (2019) Taymaz Jozaghi et al. MATERIALS & DESIGN
- Microstructure control to improve creep strength of alumina-forming austenitic heat-resistant steel by pre-strain
- (2018) Min-Ho Jang et al. MATERIALS CHARACTERIZATION
- Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels
- (2018) D.H. Wen et al. MATERIALS CHARACTERIZATION
- Preliminary creep testing of the alumina-forming austenitic stainless steel Fe-20Cr-30Ni-2Nb-5Al
- (2018) Ian Baker et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Developing fuel cladding Fe-25Cr-22Ni stainless steels with high microstructural stabilities via Mo/Nb/Ti/Ta/W alloying
- (2018) D.H. Wen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrahigh stability and strong precipitation strengthening of nanosized NbC in alumina-forming austenitic stainless steels subjecting to long-term high-temperature exposure
- (2018) W.X. Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and processing map of a Fe-25Ni-16Cr-3Al alumina-forming austenitic steel
- (2018) S. Sun et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Effect of Aluminizing on the High-Temperature Oxidation Behavior of an Alumina-Forming Austenitic Stainless Steel
- (2018) S. Rashidi et al. JOM
- Effect of boron and carbon addition on microstructure and mechanical properties of the aged gamma-prime strengthened alumina-forming austenitic alloys
- (2017) Bin Hu et al. INTERMETALLICS
- The corrosion and stress corrosion cracking behavior of a novel alumina-forming austenitic stainless steel in supercritical water
- (2017) Hongying Sun et al. JOURNAL OF NUCLEAR MATERIALS
- Hot deformation behavior and microstructural evolution of alumina-forming austenitic heat-resistant steels during hot compression
- (2017) Min-Ho Jang et al. MATERIALS CHARACTERIZATION
- Evolution of precipitates in a Cu-containing alumina-forming austenitic steel after short-term mechanical tests
- (2017) Bingbing Zhao et al. MATERIALS CHARACTERIZATION
- High temperature deformation of Laves phase precipitates in alumina-forming austenitic stainless steels
- (2017) Bin Hu et al. MATERIALS LETTERS
- The role of phosphorus in precipitation behavior and its effect on the creep properties of alumina-forming austenitic heat-resistant steels
- (2017) Min-Ho Jang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved creep strength of alumina-forming austenitic heat-resistant steels through W addition
- (2017) Min-Ho Jang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved Oxidation Resistance of a New Aluminum-Containing Austenitic Stainless Steel at 800 °C in Air
- (2017) Yongfeng Qiao et al. OXIDATION OF METALS
- Combined experiment and first-principles study of the formation of the Al2O3 layer in alumina-forming austenitic stainless steel
- (2017) Nan Dong et al. RSC Advances
- Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austenitic stainless steels at high temperatures
- (2017) Donghui Wen et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical properties of an Fe–18Ni–16Cr–4Al base alloy during aging at 950°C
- (2016) Man Wang et al. International Journal of Minerals Metallurgy and Materials
- Development of Cast Alumina-Forming Austenitic Stainless Steels
- (2016) G. Muralidharan et al. JOM
- Field and Laboratory Evaluations of Commercial and Next-Generation Alumina-Forming Austenitic Foil for Advanced Recuperators
- (2016) Bruce A. Pint et al. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME
- Austenite grain growth in alumina-forming austenitic steel
- (2016) Qiuzhi Gao et al. JOURNAL OF MATERIALS RESEARCH
- Modelling internal nitridation in an alumina-forming austenitic stainless steel
- (2016) R. Elger et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Annealing effects on precipitation and high-temperature properties of a Cu-containing alumina-forming austenitic steel
- (2016) Bingbing Zhao et al. MATERIALS LETTERS
- The effect of thermo-mechanical treatment on the high temperature tensile behavior of an alumina-forming austenitic steel
- (2016) Bin Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation kinetics during aging of an alumina-forming austenitic stainless steel
- (2016) Geneva Trotter et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of microstructure and tensile properties of Fe–18Ni–12Cr based AFA steel during aging at 700 °C
- (2016) Man Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fireside Corrosion of Alumina-Forming Austenitic (AFA) Stainless Steels
- (2016) B. S. Lutz et al. OXIDATION OF METALS
- Development of 1100 °C Capable Alumina-Forming Austenitic Alloys
- (2016) M. P. Brady et al. OXIDATION OF METALS
- Performance of chromia- and alumina-forming Fe- and Ni-base alloys exposed to metal dusting environments: The effect of water vapor and temperature
- (2015) Aurelie Rouaix-Vande Put et al. CORROSION SCIENCE
- Long term corrosion resistance of alumina forming austenitic stainless steels in liquid lead
- (2015) Jesper Ejenstam et al. JOURNAL OF NUCLEAR MATERIALS
- Precipitation sequence and its effect on age hardening of alumina-forming austenitic stainless steel
- (2015) Joonoh Moon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitate characteristics and their effects on the high-temperature creep resistance of alumina-forming austenitic stainless steels
- (2015) D.Q. Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of tungsten addition on high-temperature properties and microstructure of alumina-forming austenitic heat-resistant steels
- (2015) Min-Ho Jang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of aging on the microstructure and mechanical behavior of the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al
- (2015) Geneva Trotter et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels
- (2015) B. Hu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effects of Water Vapor on the Oxidation Behavior of Alumina Forming Austenitic Stainless Steels
- (2015) N. M. Yanar et al. OXIDATION OF METALS
- Orientation relationships of Laves phase and NiAl particles in an AFA stainless steel
- (2015) Geneva Trotter et al. PHILOSOPHICAL MAGAZINE
- Formation of L12-ordered precipitation in an alumina-forming austenitic stainless steel via Cu addition and its contribution to creep/rupture resistance
- (2015) Bingbing Zhao et al. SCRIPTA MATERIALIA
- Precipitate Behavior in Fe–20Cr–30Ni–2Nb Austenitic Heat-Resistant Steel
- (2015) Hiroki Ishikawa et al. Acta Metallurgica Sinica-English Letters
- Corrosion behavior of an alumina forming austenitic steel exposed to supercritical carbon dioxide
- (2014) Ling-Feng He et al. CORROSION SCIENCE
- Accelerated precipitation in the AFA stainless steel Fe–20Cr–30Ni–2Nb–5Al via cold working
- (2014) Geneva Trotter et al. INTERMETALLICS
- Effect of Addition of 4 % Al on the High Temperature Oxidation and Nitridation of a 20Cr–25Ni Austenitic Stainless Steel
- (2014) Ragna Elger et al. OXIDATION OF METALS
- Long-Term Oxidation of Candidate Cast Iron and Stainless Steel Exhaust System Alloys from 650 to 800 °C in Air with Water Vapor
- (2014) M. P. Brady et al. OXIDATION OF METALS
- Hot corrosion behaviour and its mechanism of a new alumina-forming austenitic stainless steel in molten sodium sulphate
- (2013) Y.F. Yan et al. CORROSION SCIENCE
- The negative effect of Zr addition on the high temperature strength in alumina-forming austenitic stainless steels
- (2013) Joonoh Moon et al. MATERIALS CHARACTERIZATION
- Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance
- (2013) M.P. Brady et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Plastic flow behaviour in an alumina-forming austenitic stainless steel at elevated temperatures
- (2013) D.Q. Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural and properties evolution of austenitic heat resistant steel after addition of aluminium
- (2013) Y F Sun et al. MATERIALS SCIENCE AND TECHNOLOGY
- Development of L12-ordered Ni3(Al,Ti)-strengthened alumina-forming austenitic stainless steel alloys
- (2013) Yukinori Yamamoto et al. SCRIPTA MATERIALIA
- Effects of silicon additions on the oxide scale formation of an alumina-forming austenitic alloy
- (2012) Xiangqi Xu et al. CORROSION SCIENCE
- Microstructure and mechanical properties of a spray-formed Ti-based metallic glass former alloy
- (2011) Enhuai Yin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steels
- (2011) Xiangqi Xu et al. MATERIALS LETTERS
- Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor
- (2011) M. P. Brady et al. OXIDATION OF METALS
- Metal Dusting of Alumina-Forming Creep-Resistant Austenitic Stainless Steels
- (2011) Jianqiang Zhang et al. OXIDATION OF METALS
- Corrosion of alumina-forming austenitic steel Fe–20Ni–14Cr–3Al–0.6Nb–0.1Ti in supercritical water
- (2010) S.H. Nie et al. JOURNAL OF NUCLEAR MATERIALS
- Overview of Strategies for High-Temperature Creep and Oxidation Resistance of Alumina-Forming Austenitic Stainless Steels
- (2010) Y. Yamamoto et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Developing New Cast Austenitic Stainless Steels With Improved High-Temperature Creep Resistance
- (2009) Philip J. Maziasz et al. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
- Recent developments in stainless steels
- (2009) K.H. Lo et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Evaluation of Mn substitution for Ni in alumina-forming austenitic stainless steels
- (2009) Y. Yamamoto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Aging effects on the mechanical properties of alumina-forming austenitic stainless steels
- (2009) H. Bei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Alloying Additions on Phase Equilibria and Creep Resistance of Alumina-Forming Austenitic Stainless Steels
- (2009) Y. Yamamoto et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Composition, Microstructure, and Water Vapor Effects on Internal/External Oxidation of Alumina-Forming Austenitic Stainless Steels
- (2009) M. P. Brady et al. OXIDATION OF METALS
- Selective Contralateral C7 Transfer in Posttraumatic Brachial Plexus Injuries: A Report of 56 Cases
- (2009) Julia K. Terzis et al. PLASTIC AND RECONSTRUCTIVE SURGERY
- Alloying effects on creep and oxidation resistance of austenitic stainless steel alloys employing intermetallic precipitates
- (2008) Y. Yamamoto et al. INTERMETALLICS
- The development of alumina-forming austenitic stainless steels for high-temperature structural use
- (2008) M. P. Brady et al. JOM
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now