Uniaxial mechanical properties of face-centered cubic single- and multiphase high-entropy alloys

Effects of Al alloying on microstructure and mechanical properties of VCoNi medium entropy alloy

(2021) J. Tian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ′-solvus temperature and superior high-temperature strength

(2021) B.X. Cao et al.   SCRIPTA MATERIALIA

Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980 °C

(2021) Uwe Glatzel et al.   Metals

Tensile and compressive plastic deformation behavior of medium-entropy Cr-Co-Ni single crystals from cryogenic to elevated temperatures

(2021) Le Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Short-range order and its impact on the CrCoNi medium-entropy alloy

(2020) Ruopeng Zhang et al.   NATURE

Yield strength and misfit volumes of NiCoCr and implications for short-range-order

(2020) Binglun Yin et al.   Nature Communications

Prediction of Face-Centered Cubic Single-Phase Formation for Non-Equiatomic Cr–Mn–Fe–Co–Ni High-Entropy Alloys Using Valence Electron Concentration and Mean-Square Atomic Displacement

(2020) Kodai Niitsu et al.   MATERIALS TRANSACTIONS

Designing high entropy superalloys for elevated temperature application

(2020) Yung-Ta Chen et al.   SCRIPTA MATERIALIA

Plastic deformation of single crystals of the equiatomic Cr−Mn−Fe−Co−Ni high-entropy alloy in tension and compression from 10 K to 1273 K

(2020) Marino Kawamura et al.   ACTA MATERIALIA

Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy

(2020) Dengshan Zhou et al.   SCRIPTA MATERIALIA

Heterogeneous precipitates facilitate excellent mechanical properties in non-equiatomic medium-entropy alloy

(2020) Wenjie Lu et al.   INTERMETALLICS

Improving high-temperature mechanical properties of cast CrFeCoNi high-entropy alloy by highly thermostable in-situ precipitated carbides

(2020) X.W. Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae

(2019) Peijian Shi et al.   Nature Communications

Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys

(2019) Lin Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and Mechanical Properties of Precipitate Strengthened High Entropy Alloy Al10Co25Cr8Fe15Ni36Ti6 with Additions of Hafnium and Molybdenum

(2019) Sebastian Haas et al.   Entropy

Effect of Initial Grain Size on Deformation Mechanism during High‐Pressure Torsion in V 10 Cr 15 Mn 5 Fe 35 Co 10 Ni 25 High‐Entropy Alloy

(2019) Peyman Asghari-Rad et al.   ADVANCED ENGINEERING MATERIALS

Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy

(2019) Shuying Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High-entropy alloys

(2019) Easo P. George et al.   Nature Reviews Materials

On the formation of hierarchical microstructure in a Mo-doped NiCoCr medium-entropy alloy with enhanced strength-ductility synergy

(2019) Junyang He et al.   SCRIPTA MATERIALIA

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

(2019) E.P. George et al.   ACTA MATERIALIA

Boron doped ultrastrong and ductile high-entropy alloys

(2018) Jae Bok Seol et al.   ACTA MATERIALIA

Effect of low temperature on tensile properties of AlCoCrFeNi 2.1 eutectic high entropy alloy

(2018) Tilak Bhattacharjee et al.   MATERIALS CHEMISTRY AND PHYSICS

Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy

(2018) Qingyun Lin et al.   Materials Research Letters

Tensile Behavior and Evolution of the Phases in the Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex/High Entropy Alloy

(2018) Anna Manzoni et al.   Entropy

Eutectic/eutectoid multi-principle component alloys: A review

(2018) Ian Baker et al.   MATERIALS CHARACTERIZATION

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

(2018) Jun Ding et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

(2018) Yao-Jian Liang et al.   Nature Communications

Ultrastrong Medium-Entropy Single-Phase Alloys Designed via Severe Lattice Distortion

(2018) Seok Su Sohn et al.   ADVANCED MATERIALS

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

(2018) T. Yang et al.   SCIENCE

Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys

(2017) Y.Y. Zhao et al.   INTERMETALLICS

Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties

(2017) Zhiming Li et al.   JOM

Controllable fabrication of a carbide-containing FeCoCrNiMn high-entropy alloy: microstructure and mechanical properties

(2017) H. Cheng et al.   MATERIALS SCIENCE AND TECHNOLOGY

Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy

(2017) F. X. Zhang et al.   PHYSICAL REVIEW LETTERS

Precipitation strengthening of ductile Cr 15 Fe 20 Co 35 Ni 20 Mo 10 alloys

(2017) Kaisheng Ming et al.   SCRIPTA MATERIALIA

The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys

(2017) Y.H. Zhang et al.   SCRIPTA MATERIALIA

Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy

(2017) Zijiao Zhang et al.   Nature Communications

Quadriwave lateral shearing interferometric microscopy with wideband sensitivity enhancement for quantitative phase imaging in real time

(2017) Tong Ling et al.   Scientific Reports

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Designing eutectic high entropy alloys of CoCrFeNiNb x

(2016) Feng He et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

(2016) Zhiming Li et al.   NATURE

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

(2016) Bernd Gludovatz et al.   Nature Communications

Atomic displacement in the CrMnFeCoNi high-entropy alloy – A scaling factor to predict solid solution strengthening

(2016) Norihiko L. Okamoto et al.   AIP Advances

Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy

(2016) Norihiko L. Okamoto et al.   Scientific Reports

Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys

(2015) Artur Tamm et al.   ACTA MATERIALIA

Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels

(2015) Naoya Kamikawa et al.   ACTA MATERIALIA

Modelling solid solution hardening in high entropy alloys

(2015) Isaac Toda-Caraballo et al.   ACTA MATERIALIA

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)

(2015) H. M. Daoud et al.   JOM

Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

(2014) Z. Wu et al.   ACTA MATERIALIA

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Tensile properties of high- and medium-entropy alloys

(2013) A. Gali et al.   INTERMETALLICS

Quantitative prediction of solute strengthening in aluminium alloys

(2010) Gerard Paul M. Leyson et al.   NATURE MATERIALS

Microstructure and Mechanical Performance of Brand-New Al0.3CrFe1.5MnNi0.5High-Entropy Alloys

(2009) Wei-Yeh Tang et al.   ADVANCED ENGINEERING MATERIALS

Short-range ordering and the abnormal mechanical properties of a Ni-20% Cr alloy

(2009) N. R. Dudova et al.   PHYSICS OF METALS AND METALLOGRAPHY