Ablation behavior of a C/C-ZrC-SiC composite based on high-solid-loading slurry impregnation under oxyacetylene torch

A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization

(2021) Italo Leite de Camargo et al.   CERAMICS INTERNATIONAL

Cyclic ablation behavior of C/C-ZrC-SiC-ZrB2 composites under oxyacetylene torch with two heat fluxes at the temperatures above 2000 ºC

(2021) Zhigang Zhao et al.   CORROSION SCIENCE

The effect of carbon source addition order during sol-gel process on the properties of C/C–ZrC–SiC composites

(2021) Chen Zeng et al.   CERAMICS INTERNATIONAL

Significant improvement of the self-protection capability of ultra-high temperature ceramic matrix composites

(2021) Francesca Servadei et al.   CORROSION SCIENCE

Effect of high-temperature heat treatment on the microstructure and mechanical behavior of PIP-based C/C-SiC composites with SiC filler

(2021) Zhenxiao Tang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Surface modification and ablation behaviors of nitrogen-doped C/C-ZrC-SiC composites via hot isostatic pressing

(2021) Zheng Peng et al.   CORROSION SCIENCE

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

(2021) Yulei Zhang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Mechanical and ablation properties of a C/C-HfB2-SiC composite prepared by high-solid-loading slurry impregnation combined with precursor infiltration and pyrolysis

(2021) Zhenxiao Tang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Reactive sintering of 2.5D Cf/ZrC-SiC ceramic matrix composite

(2021) Hao-Yang Wu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Development of UHTCMCs via water based ZrB2 powder slurry infiltration and polymer infiltration and pyrolysis

(2020) Francesca Servadei et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C

(2020) Bo-Wen Chen et al.   CORROSION SCIENCE

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

(2020) Dongyang Zhang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Design and optimization of the coating thickness on chopped carbon fibers and sintering temperature for ZrB2-SiC-Cf composites prepared by hot pressing

(2019) Cheng Fang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Additive manufacturing of silica ceramics from aqueous acrylamide based suspension

(2019) Yingying Wang et al.   CERAMICS INTERNATIONAL

Mechanical, oxidation and ablation properties of C/(C-SiC)CVI-(ZrC-SiC)PIP composites

(2019) Jinjin Yao et al.   CORROSION SCIENCE

Ablation characteristics of mosaic structure ZrC-SiC coatings on low-density, porous C/C composites

(2019) Yonglong Xu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Development of a slurry injection technique for continuous fibre ultra-high temperature ceramic matrix composites

(2019) B. Baker et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Preparation and properties of C/C−ZrB2−SiC composites by high-solid-loading slurry impregnation and polymer infiltration and pyrolysis (PIP)

(2019) Li-ping RAN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Ablation behavior of C/C-ZrC and C/SiC-ZrC composites fabricated by a joint process of slurry impregnation and chemical vapor infiltration

(2018) Haijun Zhou et al.   CERAMICS INTERNATIONAL

Thermal ablation behavior of SiC coating for 3D braided carbon fiber reinforced ZrC-SiC composites in different heat fluxes

(2018) Xiao-Hui Yang et al.   VACUUM

Testing ultra-high-temperature ceramics for thermal protection and rocket applications

(2018) R. Savino et al.   Advances in Applied Ceramics

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

(2018) Dongyang Zhang et al.   CERAMICS INTERNATIONAL

Microstructure, thermophysical properties, and ablation resistance of C/HfC-ZrC-SiC composites

(2018) Yuntian Chen et al.   CERAMICS INTERNATIONAL

Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography

(2018) Jinxing Sun et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Mechanical behaviour of carbon fibre reinforced TaC/SiC and ZrC/SiC composites up to 2100°C

(2018) Antonio Vinci et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

(2017) Sufang Tang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of B 4 C on the microstructure and properties of B 4 C modified three-dimensional needled C/C-SiC composites

(2017) Shangwu Fan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication of gradient C/C-SiC-MoSi 2 composites with enhanced ablation performance

(2016) Liyun Cao et al.   CERAMICS INTERNATIONAL

Ablation resistance of SiC–HfC–ZrC multiphase modified carbon/carbon composites

(2016) Jinhua Lu et al.   CORROSION SCIENCE

Preparation of 3D Cf/ZrC–SiC composites by joint processes of PIP and RMI

(2014) Jinming Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ablative Property of C/C–SiC–HfC Composites Prepared via Precursor Infiltration and Pyrolysis under 3,000 °C Oxyacetylene Torch

(2014) Min Yan et al.   Acta Metallurgica Sinica-English Letters

Cyclic ablation behavior of C/C–ZrC–SiC composites under oxyacetylene torch

(2013) Jing Xie et al.   CERAMICS INTERNATIONAL

Preparation of high solid loading, low viscosity ZrB2–SiC aqueous suspensions using PEI as dispersant

(2012) Rujie He et al.   CERAMICS INTERNATIONAL

A double layer nanostructure SiC coating for anti-oxidation protection of carbon/carbon composites prepared by chemical vapor reaction and chemical vapor deposition

(2012) Xin Yang et al.   CERAMICS INTERNATIONAL

Mechanism of ablation of 3D C/ZrC–SiC composite under an oxyacetylene flame

(2012) Si’an Chen et al.   CORROSION SCIENCE

Fabrication and Properties of 3-D Cf/SiC-ZrC Composites, Using ZrC Precursor and Polycarbosilane

(2012) Qinggang Li et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Reaction kinetics and ablation properties of C/C–ZrC composites fabricated by reactive melt infiltration

(2011) Yiguang Wang et al.   CERAMICS INTERNATIONAL

Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method

(2011) Zhaoqian Li et al.   CERAMICS INTERNATIONAL

Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800°C

(2009) Houbu Li et al.   CERAMICS INTERNATIONAL

A Si–SiC oxidation protective coating for carbon/carbon composites prepared by a two-step pack cementation

(2009) Fu Qian-Gang et al.   CERAMICS INTERNATIONAL

Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration

(2009) Linhua Zou et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Fabrication and characterization of a carbon fibre reinforced carbon–silicon carbide–titanium silicon carbide hybrid matrix composite

(2009) Xiaowei Yin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison of morphology and microstructure of ablation centre of C/SiC composites by oxy-acetylene torch at 2900 and 3550°C

(2008) Zhaofeng Chen et al.   CORROSION SCIENCE