Fate and emission behavior of heavy metals during hazardous chemical waste incineration

Promoting the removal of fine particles by turbulent agglomeration with the coupling of different-scale vortexes

(2020) Zongkang Sun et al.   POWDER TECHNOLOGY

Co-stabilization of Pb/Cu/Zn by beneficial utilization of sewage sludge incineration ash: Effects of heavy metal type and content

(2020) Wei Ma et al.   RESOURCES CONSERVATION AND RECYCLING

Geochemical fractions of trace metals in surface and core sections of aggregates in agricultural soils

(2020) Ali Sungur et al.   CATENA

Immobilisation of heavy metals in hazardous waste incineration residue using SiO2–Al2O3–Fe2O3–CaO glass-ceramic

(2020) Hongcai Chen et al.   CERAMICS INTERNATIONAL

Resource recovery as alternative fuel and raw material from hazardous waste

(2019) Swathy Sadala et al.   WASTE MANAGEMENT & RESEARCH

A field study of polychlorinated dibenzo-p-dioxins and dibenzofurans formation mechanism in a hazardous waste incinerator: Emission reduction strategies

(2019) Chen Wang et al.   JOURNAL OF CLEANER PRODUCTION

Highly efficient recovery and clean-up of four heavy metals from MSWI fly ash by integrating leaching, selective extraction and adsorption

(2019) Jinfeng Tang et al.   JOURNAL OF CLEANER PRODUCTION

Pollution emission characteristics, distribution of heavy metals, and particle morphologies in a hazardous waste incinerator processing phenolic waste

(2019) Chen Wang et al.   JOURNAL OF HAZARDOUS MATERIALS

Emission Characteristics of Fine Particles from Wet Flue Gas Desulfurization System Using a Cascade of Double Towers

(2018) Songtao Liu et al.   Aerosol and Air Quality Research

Distribution and leaching characteristics of heavy metals in a hazardous waste incinerator

(2018) Wenhan Li et al.   FUEL

Characterization and Leachability Propensity of Bottom Ash from Medical Waste Incineration

(2018) Mamdouh Allawzi et al.   WATER AIR AND SOIL POLLUTION

Immobilization of trace heavy metals in the electrokinetics-processed municipal solid waste incineration fly ashes and its characterizations and mechanisms

(2018) Tao Huang et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Heavy metal leaching and distribution in glass products from the co-melting treatment of electroplating sludge and MSWI fly ash

(2018) Yang Yue et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Cytotoxicity comparison between fine particles emitted from the combustion of municipal solid waste and biomass

(2018) Yu Shang et al.   JOURNAL OF HAZARDOUS MATERIALS

Effects of sorbents on the heavy metals control during tire rubber and polyethylene combustion in CO 2 /O 2 and N 2 /O 2 atmospheres

(2016) YuTing Tang et al.   FUEL

Temporal measurements and kinetics of selenium release during coal combustion and gasification in a fluidized bed

(2016) Fenghua Shen et al.   JOURNAL OF HAZARDOUS MATERIALS

Technology, cost, a performance of waste-to-energy incineration industry in China

(2016) Zhao Xin-gang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Thermal co-treatment of combustible hazardous waste and waste incineration fly ash in a rotary kiln

(2016) Florian Huber et al.   WASTE MANAGEMENT

Study of the low-temperature two-stage fluidized bed incineration: Influence of the second-stage sand bed operating conditions on pollutant emission

(2015) Tzu-Huan Peng et al.   APPLIED THERMAL ENGINEERING

Energy recovery from waste incineration: economic aspects

(2015) Deborah Panepinto et al.   Clean Technologies and Environmental Policy

Emission of Particulate Matter 2.5 (PM2.5) from Sewage Sludge Incinerators in Japan

(2015) Kenji Shiota et al.   DRYING TECHNOLOGY

Trace metals removal through a catalytic hybrid filter during cofiring of different biomass waste materials

(2015) M.L. Contreras et al.   FUEL

Influence of various chlorine additives on the partitioning of heavy metals during low-temperature two-stage fluidized bed incineration

(2014) Tzu-Huan Peng et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Existence of Cl in municipal solid waste incineration bottom ash and dechlorination effect of thermal treatment

(2014) Shuo Yang et al.   JOURNAL OF HAZARDOUS MATERIALS

Emission of particulate matter 2.5 (PM2.5) and elements from municipal solid waste incinerators

(2014) Masaki Takaoka et al.   Journal of Material Cycles and Waste Management

Influence of chlorine, sulfur and phosphorus on the volatilization behavior of heavy metals during sewage sludge thermal treatment

(2013) Jingde Luan et al.   WASTE MANAGEMENT & RESEARCH

Vulnerability assessment using hazard potency for regions generating industrial hazardous waste

(2012) Arup Das et al.   JOURNAL OF HAZARDOUS MATERIALS

Mineralogical characterization of municipal solid waste incineration bottom ash with an emphasis on heavy metal-bearing phases

(2011) Yunmei Wei et al.   JOURNAL OF HAZARDOUS MATERIALS

Formation Mechanism of Slag during Fluid-bed Gasification of Lignite

(2010) Fenghai Li et al.   ENERGY & FUELS

Investigation of heavy metal partitioning influenced by flue gas moisture and chlorine content during waste incineration

(2010) Qinghai Li et al.   JOURNAL OF ENVIRONMENTAL SCIENCES

Melting of municipal solid waste incinerator fly ash by waste-derived thermite reaction

(2008) Kuen-Sheng Wang et al.   JOURNAL OF HAZARDOUS MATERIALS

A PID ratio control for removal of in flue gas from refuse municipal incinerators

(2007) Ching-Hua Ting et al.   CONTROL ENGINEERING PRACTICE

The distribution of heavy metals during fluidized bed combustion of sludge (FBSC)

(2007) M. Van de Velden et al.   JOURNAL OF HAZARDOUS MATERIALS

Fate of heavy metals during municipal solid waste incineration in Shanghai

(2007) Hua Zhang et al.   JOURNAL OF HAZARDOUS MATERIALS