Residual mechanical performance of lightweight fiber-reinforced geopolymer mortar composites incorporating expanded clay after elevated temperatures

Fresh and hardened state performance of self-compacting slag based alkali activated concrete using nanosilica and steel fiber

(2021) Necip Altay Eren et al.   JOURNAL OF COMPOSITE MATERIALS

Residual mechanical properties of concrete containing lightweight expanded clay aggregate ( LECA ) after exposure to elevated temperatures

(2021) Farshad Dabbaghi et al.   Structural Concrete

Potential utilization of municipal solid waste incineration ashes as sand replacement for developing sustainable cementitious binder

(2021) Mohammad R. Irshidat et al.   CONSTRUCTION AND BUILDING MATERIALS

Life cycle assessment multi-objective optimization and deep belief network model for sustainable lightweight aggregate concrete

(2021) F. Dabbaghi et al.   Journal of Cleaner Production

Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete

(2021) Bassam A. Tayeh et al.   Case Studies in Construction Materials

Development and characterization of fly ash based PVA fiber reinforced Engineered Geopolymer Composites incorporating metakaolin

(2020) Li-li Kan et al.   CEMENT & CONCRETE COMPOSITES

Variation of Flexural Performance Parameters Depending on Specimen Size and Fiber Properties

(2020) A. Niş et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Spalling resistance and mechanical properties of strain-hardening ultra-high performance concrete at elevated temperature

(2020) Dong Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of slag on the mechanical properties and bond strength of fly ash-based engineered geopolymer composites

(2019) Yifeng Ling et al.   COMPOSITES PART B-ENGINEERING

Utilization of metalized plastic waste of food packaging articles in geopolymer concrete

(2019) Ankur C. Bhogayata et al.   Journal of Material Cycles and Waste Management

Effect of PVA/SiO2 NPs Additive on the Structural, Durability, and Fire Resistance Properties of Geopolymers

(2019) Muhammad Akbar Malik et al.   Applied Sciences-Basel

Structural response of ferrocement panels incorporating lightweight expanded clay and perlite aggregates: Experimental, theoretical and statistical analysis

(2019) Amirhossein Madadi et al.   ENGINEERING STRUCTURES

Geopolymers vs. alkali-activated materials (AAMs): A comparative study on durability, microstructure, and resistance to elevated temperatures of lightweight mortars

(2019) Farshad Ameri et al.   CONSTRUCTION AND BUILDING MATERIALS

Neutron shielding concrete incorporating B4C and PVA fibers exposed to high temperatures

(2019) C. Thomas et al.   Journal of Building Engineering

Effect of PVA fiber on mechanical properties of cementitious composite with and without nano-SiO2

(2019) Yifeng Ling et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on properties of fresh and hardened geopolymer mortar

(2018) Peng Zhang et al.   COMPOSITES PART B-ENGINEERING

An experimental investigation of the mechanical performance and structural application of LECA-Rubcrete

(2018) Osama Youssf et al.   CONSTRUCTION AND BUILDING MATERIALS

Lightweight expanded clay aggregate as a building material – An overview

(2018) Alaa M. Rashad   CONSTRUCTION AND BUILDING MATERIALS

Use of clay in the manufacture of lightweight aggregate

(2018) Bamdad Ayati et al.   CONSTRUCTION AND BUILDING MATERIALS

Behavior of hybrid-synthetic fiber reinforced cellular lightweight concrete under uniaxial tension – Experimental and analytical studies

(2018) Mohammad Abdur Rasheed et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of the PVA fibers and SiO 2 NPs on the structural properties of fly ash based sustainable geopolymer

(2018) Shilang Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Behaviour of engineered cementitious composites and hybrid engineered cementitious composites at high temperatures

(2018) S. Pourfalah   CONSTRUCTION AND BUILDING MATERIALS

Mechanical behavior of steel fiber-reinforced self-compacting concrete corbels after exposure to elevated temperatures

(2018) Khamees Nayyef Abdulhaleem et al.   Structural Concrete

Use of crushed clay brick and pumice aggregates in lightweight geopolymer concrete

(2018) Ampol Wongsa et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical, thermal and microstructural properties of epoxy-OAT composites

(2018) Gholamali Farzi et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers

(2015) Giulia Masi et al.   COMPOSITES PART B-ENGINEERING

A comparison of strength and elastic properties between conventional and lightweight structural concretes designed with expanded clay aggregates

(2015) Murat Emre Dilli et al.   CONSTRUCTION AND BUILDING MATERIALS

Ductility enhancement of geopolymer concrete columns using fibre-reinforced polymer confinement

(2015) Weena Lokuge et al.   JOURNAL OF COMPOSITE MATERIALS

Effect of elevated temperature on strain-hardening engineered cementitious composites

(2014) Prakash S. Bhat et al.   CONSTRUCTION AND BUILDING MATERIALS

A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites

(2014) Motohiro Ohno et al.   CONSTRUCTION AND BUILDING MATERIALS

Tensile performance of polyvinyl alcohol–steel hybrid fiber reinforced cementitious composite with impact of water to binder ratio

(2014) Wang Zhenbo et al.   JOURNAL OF COMPOSITE MATERIALS

Durability under thermal loads of polyvinyl alcohol fibers

(2014) Margareth Silva Magalhães et al.   Materia-Rio de Janeiro

Utility of polyvinyl alcohol fiber-based needle punched nonwoven fabric as potential reinforcement in cementitious composites

(2013) BY Pekmezci et al.   JOURNAL OF COMPOSITE MATERIALS

Mechanical and Microstructural Evaluations of Lightweight Aggregate Geopolymer Concrete before and after Exposed to Elevated Temperatures

(2013) Omar Abdulkareem et al.   Materials

A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites

(2011) Ahmet Çavdar   COMPOSITES PART B-ENGINEERING

Effect of Fly Ash and PVA Fiber on Microstructural Damage and Residual Properties of Engineered Cementitious Composites Exposed to High Temperatures

(2011) Mustafa Şahmaran et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Acoustic and mechanical properties of expanded clay granulates consolidated by epoxy resin

(2010) Ruggero Bartolini et al.   APPLIED CLAY SCIENCE

Properties of alkali-activated mortar and concrete using lightweight aggregates

(2009) Keun-Hyeok Yang et al.   MATERIALS AND STRUCTURES

Transition from brittle to ductile behavior of fly ash using PVA fibers

(2007) Peijiang Sun et al.   CEMENT & CONCRETE COMPOSITES