Effects of recycled ceramic aggregates on internal curing of high performance concrete

The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete

(2021) Abdullah M. Zeyad et al.   CONSTRUCTION AND BUILDING MATERIALS

Engineering properties of self-cured normal and high strength concrete produced using polyethylene glycol and porous ceramic waste as coarse aggregate

(2021) Mohamed Amin et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of steam curing regimes on the properties of ultrafine POFA-based high-strength green concrete

(2021) Abdullah M. Zeyad et al.   Journal of Building Engineering

Use of ceramic wastes as aggregates in concrete production: A review

(2021) Sourav Ray et al.   Journal of Building Engineering

The Utilization of Recycled Aggregate in High Performance Concrete: A Review

(2020) Bassam A. Tayeh et al.   Journal of Materials Research and Technology-JMR&T

Factors affecting the effectiveness of internal curing: A review

(2020) Li Yang et al.   CONSTRUCTION AND BUILDING MATERIALS

Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material

(2019) Mitsuo Ozawa et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on the use of LWA as an internal curing agent of high performance cement-based materials

(2019) Xianwei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Steel chip and porcelain ceramic wastes used as replacements for coarse aggregates in concrete

(2019) Zahra Keshavarz et al.   JOURNAL OF CLEANER PRODUCTION

Perforated cenospheres: A reactive internal curing agent for alkali activated slag mortars

(2019) Peiyuan Chen et al.   CEMENT & CONCRETE COMPOSITES

Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete

(2019) Ibrahim Saad Agwa et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical performance evaluation of concrete made with recycled ceramic coarse aggregates from industrial brick waste

(2018) Miguel C.S. Nepomuceno et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of pore structure and water absorption on internal curing efficiency of porous aggregates

(2018) Dinghua Zou et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of internal curing on the pore size distribution of high strength concrete

(2018) Joo Hyung Kim et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycling of industrial wastes in ceramic manufacturing: State of art and glass case studies

(2016) Fernanda Andreola et al.   CERAMICS INTERNATIONAL

Effect of lightweight aggregate type on early-age autogenous shrinkage of concrete

(2016) Yi-zhou Zhuang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens

(2016) Dejian Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of using recycled concrete aggregates on the shrinkage of high performance concrete

(2016) Andreu Gonzalez-Corominas et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of concrete utilising waste ceramic as coarse aggregate

(2016) Derrick J. Anderson et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilisation of crushed floor and wall tile wastes as aggregate in concrete production

(2016) Hakan Elçi   JOURNAL OF CLEANER PRODUCTION

Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs

(2014) Yudong Han et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of structural concrete with fine recycled ceramic aggregates

(2014) A.V. Alves et al.   CONSTRUCTION AND BUILDING MATERIALS

Using ceramic sanitary ware waste as concrete aggregate

(2013) Anna Halicka et al.   CONSTRUCTION AND BUILDING MATERIALS

Using ceramic wastes from tile industry as a partial substitute of natural aggregates in hot mix asphalt binder courses

(2013) Ramón Silvestre et al.   CONSTRUCTION AND BUILDING MATERIALS

The influence of the initial moisture content of lightweight aggregate on internal curing

(2012) Michael Golias et al.   CONSTRUCTION AND BUILDING MATERIALS

An investigation on the use of zeolite aggregates for internal curing of concrete

(2012) Sadegh Ghourchian et al.   CONSTRUCTION AND BUILDING MATERIALS

A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO 2 particles

(2012) Ali Heidari et al.   CONSTRUCTION AND BUILDING MATERIALS

Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures

(2011) Javier Castro et al.   CEMENT & CONCRETE COMPOSITES

Micromechanical modeling on autogenous and drying shrinkages of concrete

(2011) Jun Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Concrete Containing Natural Pozzolans: New Challenges for Internal Curing

(2011) Gaston Espinoza-Hijazin et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes

(2010) Pincha Torkittikul et al.   CEMENT & CONCRETE COMPOSITES

Development and characterisation of triaxial electrical porcelains from Ugandan ceramic minerals

(2010) Peter W. Olupot et al.   CERAMICS INTERNATIONAL

Extending internal curing to concrete mixtures with W/C higher than 0.42

(2010) Gaston Espinoza-Hijazin et al.   CONSTRUCTION AND BUILDING MATERIALS

Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks

(2010) Bart Craeye et al.   CONSTRUCTION AND BUILDING MATERIALS

Concrete made from ceramic industry waste: Durability properties

(2010) RM. Senthamarai et al.   CONSTRUCTION AND BUILDING MATERIALS

Use of porous ceramic waste aggregates for internal curing of high-performance concrete

(2009) Masahiro Suzuki et al.   CEMENT AND CONCRETE RESEARCH

Reusing ceramic wastes in concrete

(2009) F. Pacheco-Torgal et al.   CONSTRUCTION AND BUILDING MATERIALS

Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking

(2008) Daniel Cusson et al.   CEMENT AND CONCRETE RESEARCH

Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete

(2008) Burcu Akcay et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of crushed clay brick aggregate on mortar durability

(2008) F. Bektas et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of brick aggregate concrete

(2008) Paulo B. Cachim   CONSTRUCTION AND BUILDING MATERIALS

The use of coarse and fine crushed bricks as aggregate in concrete

(2007) Farid Debieb et al.   CONSTRUCTION AND BUILDING MATERIALS