Facile and green fabrication of robust microstructured stainless steel mesh for efficient oil/water separation via waterjet-assisted laser ablation

Glass surface micromachining with simultaneous nanomaterial deposition by picosecond laser for wettability control

(2021) Zhen Wang et al.   APPLIED SURFACE SCIENCE

Improvement of mechanical properties of HfB2-based composites by incorporating in situ SiC reinforcement through pressureless sintering

(2021) S. Ghadami et al.   Scientific Reports

A feasibility study on high-power fiber laser cutting of thick CFRP laminates using single-pass strategy

(2021) Maojun Li et al.   OPTICS AND LASER TECHNOLOGY

Fabrication of superhydrophobic nano-soil coated surfaces for oil/water separation and metal corrosion protection

(2021) Lei Kang et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Corrosion behavior of a non-equiatomic CoCrFeNiTi high-entropy alloy: A comparison with 304 stainless steel in simulated body fluids

(2021) Qingqing Lu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Nanosecond laser fabrication of superhydrophobic Ti6Al4V surfaces assisted with different liquids

(2020) Yutong Wang et al.   Colloid and Interface Science Communications

Robust and switchable superwetting sponge-like membrane: Towards on-demand emulsion separation and aqueous pollutant degradation

(2020) Ruixia Yuan et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Robust and continuous oil/water separation with superhydrophobic glass microfiber membrane by vertical polymerization under harsh conditions

(2020) Seeun Woo et al.   Scientific Reports

Reversible Wettability between Underwater Superoleophobicity and Superhydrophobicity of Stainless Steel Mesh for Efficient Oil–Water Separation

(2020) Jiaqi Wang et al.   ACS Omega

Laser surface texturing of ceramics and ceramic composite materials – A review

(2020) Alessandro De Zanet et al.   CERAMICS INTERNATIONAL

Hierarchical WO3@Cu(OH)2 nanorod arrays grown on copper mesh with superwetting and self-cleaning properties for high-performance oil/water separation

(2020) Huaqiang He et al.   JOURNAL OF ALLOYS AND COMPOUNDS

One-step fabrication of brass filter with reversible wettability by nanosecond fiber laser ablation for highly efficient oil/water separation

(2020) Nastaran Bakhtiari et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Fabrication of a superhydrophobic fabric with a uniform hierarchical structure via a bottom-blown stirring method for highly efficient oil–water separation

(2020) Gang Huang et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Fabrication of a Ni/SiC composite coating on steel surface with excellent corrosion inhibition performance

(2020) Jing Li et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Switchable Wettability Surface with Chemical Stability and Antifouling Properties for Controllable Oil–Water Separation

(2019) Hanpeng Gao et al.   LANGMUIR

Design and fabrication of superwetting fiber-based membranes for oil/water separation applications

(2019) Xuejie Yue et al.   CHEMICAL ENGINEERING JOURNAL

Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining

(2019) Shaochuan Feng et al.   MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING

Egg Shell Powders-Coated Membrane for Surfactant-Stabilized Crude Oil-in-Water Emulsions Efficient Separation

(2019) Haijun Zhang et al.   ACS Sustainable Chemistry & Engineering

Facile fabrication of biomimetic liquid-infused slippery surface on carbon steel and its self-cleaning, anti-corrosion, anti-frosting and tribological properties

(2019) Qiang Ma et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

ZnO nanoparticles coated mesh with switchable wettability for on-demand ultrafast separation of emulsified oil/water mixtures

(2019) Xiangge Bai et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Novel metal-organic super-hydrophobic surface fabricated by nanosecond laser irradiation in solution

(2019) Zhen Yang et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Eco-friendly and scratch-resistant hybrid coating on mesh for gravity-driven oil/water separation

(2019) Jintao Wang et al.   JOURNAL OF CLEANER PRODUCTION

Biomimetic and Superwettable Nanofibrous Skins for Highly Efficient Separation of Oil-in-Water Emulsions

(2018) Jianlong Ge et al.   ADVANCED FUNCTIONAL MATERIALS

State of the art of produced water treatment

(2018) S. Jiménez et al.   CHEMOSPHERE

Nanosecond Laser-Induced Underwater Superoleophobic and Underoil Superhydrophobic Mesh for Oil/Water Separation

(2018) Zhongxu Lian et al.   LANGMUIR

Underwater laser weld bowing distortion behavior and mechanism of thin 304 stainless steel plates

(2018) ZunYue Huang et al.   OPTICS AND LASER TECHNOLOGY

Dynamic features of bubble induced by a nanosecond pulse laser in still and flowing water

(2018) Wisan Charee et al.   OPTICS AND LASER TECHNOLOGY

Superhydrophilic nickel-coated meshes with controllable pore size prepared by electrodeposition from deep eutectic solvent for efficient oil/water separation

(2018) Yuanyuan Hou et al.   SEPARATION AND PURIFICATION TECHNOLOGY

A review of bio-based materials for oil spill treatment

(2018) Bhairavi Doshi et al.   WATER RESEARCH

Nanosecond laser ablation for enhanced adhesion of CuO nanowires on copper substrate and its application for oil-water separation

(2018) Si Ying Khew et al.   APPLIED SURFACE SCIENCE

Recyclable magnetic superhydrophobic straw soot sponge for highly efficient oil/water separation

(2017) Farshad Beshkar et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Femtosecond laser induced robust periodic nanoripple structured mesh for highly efficient oil–water separation

(2017) Kai Yin et al.   Nanoscale

Influence of plasma shock wave on the morphology of laser drilling in different environments

(2017) Zhaoyang Zhai et al.   OPTICS COMMUNICATIONS

Oil spill impacts on mangroves: Recommendations for operational planning and action based on a global review

(2016) Norman C. Duke   MARINE POLLUTION BULLETIN

Mechanically Robust Superhydrophobic Steel Surface with Anti-Icing, UV-Durability, and Corrosion Resistance Properties

(2015) Nan Wang et al.   ACS Applied Materials & Interfaces

Effect of residual stress induced by pulsed-laser irradiation on initiation of chloride stress corrosion cracking in stainless steel

(2013) Shuzo Eto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An investigation of hybrid laser–waterjet ablation of silicon substrates

(2012) V. Tangwarodomnukun et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

A sustainable approach to controlling oil spills

(2012) Abdul Aziz Al-Majed et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process

(2012) Q. H. Li et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Patterned Superhydrophobic Metallic Surfaces

(2009) Anne-Marie Kietzig et al.   LANGMUIR

Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid CO[sub 2] Laser∕Waterjet Machining of Ceramics

(2008) Dinesh Kalyanasundaram et al.   JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME