标题
Recent advances in 3D printing technologies for wearable (bio)sensors
作者
关键词
3D printing, Additive manufacturing, Wearable biosensor, Microfluidic, Strain sensor, Tactile sensor
出版物
Additive Manufacturing
Volume 46, Issue -, Pages 102088
出版商
Elsevier BV
发表日期
2021-06-03
DOI
10.1016/j.addma.2021.102088
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Optimization, fabrication, and characterization of four electrode-based sensors for blood impedance measurement
- (2021) Rangadhar Pradhan et al. BIOMEDICAL MICRODEVICES
- Self-Healable Hydrogel–Liquid Metal Composite Platform Enabled by a 3D Printed Stamp for a Multimodular Sensor System
- (2020) Yoon Young Choi et al. ACS Applied Materials & Interfaces
- Aerosol-Jet-Printed Graphene Immunosensor for Label-Free Cytokine Monitoring in Serum
- (2020) Kshama Parate et al. ACS Applied Materials & Interfaces
- 3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring
- (2020) Elham Davoodi et al. ACS Nano
- Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective
- (2020) Mohammad A. Azad et al. Pharmaceutics
- 3D Printed, Customizable, and Multifunctional Smart Electronic Eyeglasses for Wearable Healthcare Systems and Human–Machine Interfaces
- (2020) Joong Hoon Lee et al. ACS Applied Materials & Interfaces
- Printed Organic Transistor-based Biosensors for Non-invasive Sweat Analysis
- (2020) Kuniaki NAGAMINE et al. ANALYTICAL SCIENCES
- Additive-manufactured (3D-printed) electrochemical sensors: A critical review
- (2020) Rafael M. Cardoso et al. ANALYTICA CHIMICA ACTA
- Integrated wearable sensors with bending/stretching selectivity and extremely enhanced sensitivity derived from agarose-based ionic conductor and its 3D-shaping
- (2020) Xinran Su et al. CHEMICAL ENGINEERING JOURNAL
- Microfluidics by Additive Manufacturing for Wearable Biosensors: A Review
- (2020) Mahshid Padash et al. SENSORS
- Tunable ionic pressure sensor based on 3D printed ordered hierarchical mesh structure
- (2020) Qiang Zou et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D-printed biosensors for electrochemical and optical applications
- (2020) Jose Muñoz et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- 3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter
- (2020) Sara Abdollahi et al. Advanced Healthcare Materials
- Accounts in 3D‐Printed Electrochemical Sensors: Towards Monitoring of Environmental Pollutants
- (2020) Jose Muñoz et al. ChemElectroChem
- 3D-printed highly stable flexible strain sensor based on silver-coated-glass fiber-filled conductive silicon rubber
- (2020) Chen Zhao et al. MATERIALS & DESIGN
- Laser-Induced Direct Patterning of Free-standing Ti3C2–MXene Films for Skin Conformal Tattoo Sensors
- (2020) Vaishakh Kedambaimoole et al. ACS Sensors
- 3D printed deformable sensors
- (2020) Zhijie Zhu et al. Science Advances
- Emerging Applications of Additive Manufacturing in Biosensors and Bioanalytical Devices
- (2020) Xiaofan Ruan et al. Advanced Materials Technologies
- 3D Printing of Flexible Strain Sensor Array Based on UV‐Curable Multiwalled Carbon Nanotube/Elastomer Composite
- (2020) Ting Xiao et al. Advanced Materials Technologies
- A wearable microfluidics-integrated impedimetric immunosensor based on Ti3C2T MXene incorporated laser-burned graphene for noninvasive sweat cortisol detection
- (2020) Joong San Nah et al. SENSORS AND ACTUATORS B-CHEMICAL
- Freestanding Functional Structures by Aerosol-Jet Printing for Stretchable Electronics and Sensing Applications
- (2019) Qingshen Jing et al. Advanced Materials Technologies
- Metallic Nanoparticle Inks for 3D Printing of Electronics
- (2019) Hong Wei Tan et al. Advanced Electronic Materials
- Recent Developments in Printing Flexible and Wearable Sensing Electronics for Healthcare Applications
- (2019) Saleem Khan et al. SENSORS
- Wearable biosensors for healthcare monitoring
- (2019) Jayoung Kim et al. NATURE BIOTECHNOLOGY
- Biodegradable polymer material based smart stent: Wireless pressure sensor and 3D printed stent
- (2019) Jongsung Park et al. MICROELECTRONIC ENGINEERING
- Investigation of Lightweight and Flexible Carbon Nanofiber/Poly Dimethylsiloxane Nanocomposite Sponge for Piezoresistive Sensor Application
- (2019) Mohammad Charara et al. ADVANCED ENGINEERING MATERIALS
- Facile fabrication of flexible glutamate biosensor using direct writing of platinum nanoparticle-based nanocomposite ink
- (2019) Tran N.H. Nguyen et al. BIOSENSORS & BIOELECTRONICS
- Graphene inks for the 3D printing of cell culture scaffolds and related molecular arrays
- (2019) George Mihail Vlăsceanu et al. COMPOSITES PART B-ENGINEERING
- A self-powered wearable sweat-evaporation-biosensing analyzer for building sports big data
- (2019) Hongye Guan et al. Nano Energy
- Dynamic Hydrogels and Polymers as Inks for Three-Dimensional Printing
- (2019) Pejman Heidarian et al. ACS Biomaterials-Science & Engineering
- Functional nanocomposites for 3D printing of stretchable and wearable sensors
- (2019) Mohammad Abshirini et al. Applied Nanoscience
- Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
- (2019) Lu-yu Zhou et al. ACS Applied Materials & Interfaces
- A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing
- (2019) N. J. Wilkinson et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Wearable Paper‐Based Sweat Sensor for Human Perspiration Monitoring
- (2019) Marc Parrilla et al. Advanced Healthcare Materials
- M3D aerosol jet printed buckypaper multifunctional sensors for composite structural health monitoring
- (2019) Sabrina Siddique et al. Results in Physics
- 3D printing of electrically conductive hydrogels for tissue engineering and biosensors – A review
- (2019) Thomas Distler et al. Acta Biomaterialia
- 3D‐Printed Coaxial Fibers for Integrated Wearable Sensor Skin
- (2019) Yang Gao et al. Advanced Materials Technologies
- A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors
- (2019) Ge Shi et al. Applied Materials Today
- Extrusion printing of carbon nanotube-coated elastomer fiber with microstructures for flexible pressure sensors
- (2019) Yang Gao et al. SENSORS AND ACTUATORS A-PHYSICAL
- Toward Continuous Monitoring of Breath Biochemistry: A Paper-Based Wearable Sensor for Real-Time Hydrogen Peroxide Measurement in Simulated Breath
- (2019) Daniela Maier et al. ACS Sensors
- Inkjet‐Printed Soft Resistive Pressure Sensor Patch for Wearable Electronics Applications
- (2019) Li‐Wei Lo et al. Advanced Materials Technologies
- Impact of Triple Roll Milling Processing Parameters on Fluidic/Rheological and Electrical Properties of Aqueous Graphene Ink
- (2019) Sandeep Kumar et al. ADVANCED ENGINEERING MATERIALS
- Skin in the diagnostics game: Wearable biosensor nano- and microsystems for medical diagnostics
- (2019) Muamer Dervisevic et al. Nano Today
- 3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
- (2019) Samuel Hales et al. NANOTECHNOLOGY
- 3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
- (2018) C. Lorena Manzanares Palenzuela et al. ANALYTICAL CHEMISTRY
- Effect of Brownian motion on reduced agglomeration of nanostructured metal oxide towards development of efficient cancer biosensor
- (2018) Suveen Kumar et al. BIOSENSORS & BIOELECTRONICS
- Wearable sensors: modalities, challenges, and prospects
- (2018) J. Heikenfeld et al. LAB ON A CHIP
- (Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
- (2018) C. Lorena Manzanares Palenzuela et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
- (2018) Chuan Yi Foo et al. Scientific Reports
- The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes
- (2018) Hairul Hisham Bin Hamzah et al. Scientific Reports
- 3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin
- (2018) Changyong Liu et al. Polymers
- Micro additive manufacturing of glucose biosensors: A feasibility study
- (2018) Sepehr Nesaei et al. ANALYTICA CHIMICA ACTA
- 3D printable conductive materials for the fabrication of electrochemical sensors: A mini review
- (2018) Hairul Hisham Hamzah et al. ELECTROCHEMISTRY COMMUNICATIONS
- Electrically conductive hydrogels for flexible energy storage systems
- (2018) Wei Zhang et al. PROGRESS IN POLYMER SCIENCE
- Direct ink writing of organic and carbon aerogels
- (2018) Swetha Chandrasekaran et al. Materials Horizons
- Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering
- (2018) Shweta Agarwala et al. ACS Sensors
- Wireless pressure sensor integrated with a 3D printed polymer stent for smart health monitoring
- (2018) Jongsung Park et al. SENSORS AND ACTUATORS B-CHEMICAL
- Three-dimensional printing of a tunable graphene-based elastomer for strain sensors with ultrahigh sensitivity
- (2018) Kai Huang et al. CARBON
- Review on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre
- (2017) Ramdayal Yadav et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
- (2017) Hua Gong et al. LAB ON A CHIP
- The Boom in 3D-Printed Sensor Technology
- (2017) Yuanyuan Xu et al. SENSORS
- Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review
- (2017) Xiaocong Tian et al. Advanced Energy Materials
- Highly flexible, freestanding tandem sulfur cathodes for foldable Li–S batteries with a high areal capacity
- (2017) Chi-Hao Chang et al. Materials Horizons
- Bend, stretch, and touch: Locating a finger on an actively deformed transparent sensor array
- (2017) Mirza Saquib Sarwar et al. Science Advances
- 3D Printed Graphene Based Energy Storage Devices
- (2017) Christopher W. Foster et al. Scientific Reports
- Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
- (2017) Amin M’Barki et al. Scientific Reports
- Excellent Humidity Sensor Based on LiCl Loaded Hierarchically Porous Polymeric Microspheres
- (2016) Kai Jiang et al. ACS Applied Materials & Interfaces
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
- (2016) Mohamed A. Alhnan et al. PHARMACEUTICAL RESEARCH
- Highly stretchable, transparent ionic touch panel
- (2016) C.-C. Kim et al. SCIENCE
- Highly Stretchable and Wearable Graphene Strain Sensors with Controllable Sensitivity for Human Motion Monitoring
- (2015) Jung Jin Park et al. ACS Applied Materials & Interfaces
- Lightweight, Superelastic, and Mechanically Flexible Graphene/Polyimide Nanocomposite Foam for Strain Sensor Application
- (2015) Yuyang Qin et al. ACS Nano
- Extremely Elastic Wearable Carbon Nanotube Fiber Strain Sensor for Monitoring of Human Motion
- (2015) Seongwoo Ryu et al. ACS Nano
- 3D Printed Microfluidic Device with Integrated Biosensors for Online Analysis of Subcutaneous Human Microdialysate
- (2015) Sally A. N. Gowers et al. ANALYTICAL CHEMISTRY
- Zeolitic imidazolate framework-derived nitrogen-doped porous carbons as high performance supercapacitor electrode materials
- (2015) Shan Zhong et al. CARBON
- Wireless Flexible Smart Bandage for Continuous Monitoring of Wound Oxygenation
- (2015) Pooria Mostafalu et al. IEEE Transactions on Biomedical Circuits and Systems
- Highly sensitive acetone gas sensor based on porous ZnFe2O4 nanospheres
- (2015) Xin Zhou et al. SENSORS AND ACTUATORS B-CHEMICAL
- Flexible and self-powered temperature–pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials
- (2015) Fengjiao Zhang et al. Nature Communications
- 3D Printable Graphene Composite
- (2015) Xiaojun Wei et al. Scientific Reports
- Highly Stretchable and Transparent Ionogels as Nonvolatile Conductors for Dielectric Elastomer Transducers
- (2014) Baohong Chen et al. ACS Applied Materials & Interfaces
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- Ionic skin
- (2014) Jeong-Yun Sun et al. ADVANCED MATERIALS
- Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
- (2014) Bethany C. Gross et al. ANALYTICAL CHEMISTRY
- Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt
- (2014) Yuanyuan Bai et al. APPLIED PHYSICS LETTERS
- 3D Printing Gets a Boost and Opportunities with Polymer Materials
- (2014) Manfred Hofmann ACS Macro Letters
- A Soft Strain Sensor Based on Ionic and Metal Liquids
- (2013) Jean-Baptiste Chossat et al. IEEE SENSORS JOURNAL
- 3D Printed Bionic Ears
- (2013) Manu S. Mannoor et al. NANO LETTERS
- Stretchable, Transparent, Ionic Conductors
- (2013) C. Keplinger et al. SCIENCE
- Microstructured Silicone Substrate for Printable and Stretchable Metallic Films
- (2011) Adam P. Robinson et al. LANGMUIR
- Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
- (2011) Darren J. Lipomi et al. Nature Nanotechnology
- A 3D printed dry electrode for ECG/EEG recording
- (2011) P. Salvo et al. SENSORS AND ACTUATORS A-PHYSICAL
- Triggering the Sintering of Silver Nanoparticles at Room Temperature
- (2010) Shlomo Magdassi et al. ACS Nano
- Ultrathin Silicon Circuits With Strain-Isolation Layers and Mesh Layouts for High-Performance Electronics on Fabric, Vinyl, Leather, and Paper
- (2009) Dae-Hyeong Kim et al. ADVANCED MATERIALS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now