Zeolite versus carbon adsorbents in carbon capture: A comparison from an operational and life cycle perspective

The advances in post‐combustion CO2 capture by physical adsorption: from materials innovation to separation practice

(2021) An-Hui Lu et al.   ChemSusChem

Carbon materials as CO2 adsorbents: a review

(2021) Anuradha Sharma et al.   Environmental Chemistry Letters

Practically Achievable Process Performance Limits for Pressure-Vacuum Swing Adsorption-Based Postcombustion CO2 Capture

(2021) Kasturi Nagesh Pai et al.   ACS Sustainable Chemistry & Engineering

Life-cycle assessment of an industrial direct air capture process based on temperature–vacuum swing adsorption

(2021) Sarah Deutz et al.   Nature Energy

Life cycle environmental and economic assessment of highly efficient carbon-based CO2 adsorbents: A comparative study

(2021) Mohsen Nowrouzi et al.   Journal of CO2 Utilization

Comparative life cycle assessment of polymeric membranes: Polyacrylonitrile, polyvinylimidazole and poly (acrylonitrile-co-vinylimidazole) applied for CO2 sequestration

(2021) Eshagh Khaki et al.   Environmental Technology & Innovation

CO2 Capture by Temperature Swing Adsorption: Working Capacity As Affected by Temperature and CO2 Partial Pressure

(2020) Federica Raganati et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Utilization of zeolites as CO2 capturing agents: Advances and future perspectives

(2020) Santosh Kumar et al.   Journal of CO2 Utilization

High-throughput screening of hypothetical aluminosilicate zeolites for CO2 capture from flue gas

(2020) Chao Shi et al.   Journal of CO2 Utilization

Techno-economic assessment of optimised vacuum swing adsorption for post-combustion CO2 capture from steam-methane reformer flue gas

(2020) Sai Gokul Subraveti et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Post-combustion CO2 capture by RVPSA in a large-scale steam reforming plant

(2019) Mauro Capocelli et al.   Journal of CO2 Utilization

Ionic Liquid versus Traditional Volatile Organic Solvent in the Natural Gas Dehydration Process: A Comparison from a Life Cycle Perspective

(2019) Bin Wu et al.   ACS Sustainable Chemistry & Engineering

Assessment of CO2 desorption from 13X zeolite for a prospective TSA process

(2019) Rafael Morales-Ospino et al.   ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY

CO2 capture from dry flue gas by means of VPSA, TSA and TVSA

(2019) Nan Jiang et al.   Journal of CO2 Utilization

High performing CMS adsorbent for O2 / N2 separation

(2019) Márcia Andrade et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Energy and productivity efficient vacuum pressure swing adsorption process to separate CO 2 from CO 2 /N 2 mixture using Mg-MOF-74: A CFD simulation

(2018) Naef A.A. Qasem et al.   APPLIED ENERGY

A search for selectivity to enable CO2 capture with porous adsorbents

(2018) M. Oschatz et al.   Energy & Environmental Science

Stability and regenerability of acivated carbon used for CO2 removal in pilot DR-VPSA unit in real power plant conditions

(2018) Izabela Majchrzak-Kucęba et al.   Journal of CO2 Utilization

Experimental study and energy-efficiency evaluation of a 4-step pressure-vacuum swing adsorption (PVSA) for CO 2 capture

(2017) Ruikai Zhao et al.   ENERGY CONVERSION AND MANAGEMENT

An Integrated Two-Stage P/VSA Process for Postcombustion CO2 Capture Using Combinations of Adsorbents Zeolite 13X and Mg-MOF-74

(2017) George N. Nikolaidis et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Preparation of carbon molecular sieves and its impregnation with Co and Ni for CO2/N2 separation

(2017) M. Hemmat et al.   International Journal of Environmental Science and Technology

Optimal Faujasite structures for post combustion CO 2 capture and separation in different swing adsorption processes

(2017) Hèctor Prats et al.   Journal of CO2 Utilization

Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review

(2016) R. Ben-Mansour et al.   APPLIED ENERGY

Adsorption Separation of CO2/CH4 Gas Mixture on Carbon Molecular Sieves Modified by Potassium Carbonate

(2016) Dingding Liu et al.   JOURNAL OF CHEMICAL AND ENGINEERING DATA

Pressure swing adsorption for CO 2 /N 2 and CO 2 /CH 4 separation: Comparison between activated carbons and zeolites performances

(2015) Mariem Kacem et al.   FUEL PROCESSING TECHNOLOGY

CO2capture from dry flue gas by vacuum swing adsorption: A pilot plant study

(2014) Shreenath Krishnamurthy et al.   AICHE JOURNAL

DES assisted synthesis of hierarchical nitrogen-doped carbon molecular sieves for selective CO2versus N2 adsorption

(2014) J. Patiño et al.   Journal of Materials Chemistry A

Experimental evaluation of adsorption technology for CO2 capture from flue gas in an existing coal-fired power plant

(2013) Lu Wang et al.   CHEMICAL ENGINEERING SCIENCE

Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads

(2012) Chunzhi Shen et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Numerical analysis of CO2 concentration and recovery from flue gas by a novel vacuum swing adsorption cycle

(2010) José A. Delgado et al.   COMPUTERS & CHEMICAL ENGINEERING

Adsorption kinetics of various gases in carbon molecular sieves (CMS) produced from palm shell

(2007) M.A. Ahmad et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS