Effect of ECCS cold-leg injection angle on thermal hydraulic characteristics and core recovery during LBLOCA in a PWR

Performance and exergy analysis of different perforated rib designs of triple tubes heat exchanger employing hybrid nanofluids

(2021) Ashraf Mimi Elsaid et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Effect of temperature difference on the thermal mixing phenomenon in a T-junction under inflow pulsation

(2020) Bo Su et al.   NUCLEAR ENGINEERING AND DESIGN

Parametric study on vehicle fuel economy and optimization criteria of the pleated air filter designs to improve the performance of an I.C diesel engine: Experimental and CFD approaches

(2020) Sabry Allam et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Assessment of ECCMIX component in RELAP5 based on ECCS experiment

(2019) Gongle Song et al.   Nuclear Engineering and Technology

Numerical research on thermal mixing characteristics in a 45-degree T-junction for two-phase stratified flow during the emergency core cooling safety injection

(2019) Tangtao Feng et al.   PROGRESS IN NUCLEAR ENERGY

Effect of wall friction model on predicting emergency core coolant behavior in upper downcomer with direct vessel safety injection using MARS-KS

(2018) Chi-Jin Choi et al.   ANNALS OF NUCLEAR ENERGY

Large Eddy Simulation of the injection of cold ECC water into the cold leg of a pressurized water reactor

(2018) Ulrich Bieder et al.   NUCLEAR ENGINEERING AND DESIGN

Effect of emergency core cooling system flow reduction on channel temperature during recirculation phase of large break loss-of-coolant accident at Wolsong unit 1

(2017) Seon Oh Yu et al.   Nuclear Engineering and Technology

Experiment research on thermal mixing in horizontal T-junction: In-pipe temperature and flow characteristic research

(2017) Wuyue Ren et al.   PROGRESS IN NUCLEAR ENERGY

ECC condensation research in T-junction

(2016) W.Y. Ren et al.   PROGRESS IN NUCLEAR ENERGY

Cold leg condensation model for analyzing loss-of-coolant accident in PWR

(2015) Jun Liao et al.   NUCLEAR ENGINEERING AND DESIGN

CFD based approach for modeling steam–water direct contact condensation in subcooled water flow in a tee junction

(2015) S.Q. Li et al.   PROGRESS IN NUCLEAR ENERGY