Influence of dispersed β phase on local deformation pattern in mill-annealed Ti-Fe-O alloy under dwell fatigue loading

Heterogeneous Deformation in a Commercially Pure Titanium Sheet under Dwell Fatigue Loading: Crystal Plasticity Modeling and Experiment

(2021) Liangwei Yin et al.   ISIJ INTERNATIONAL

Plastic deformation mode and α/β slip transfer of Ti–5Al-2.5Cr-0.5Fe-4.5Mo–1Sn–2Zr–3Zn titanium alloy at room temperature

(2020) Xin Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Tensile deformation of texture-controlled titanium with high oxygen content at room temperature

(2020) Motoaki Morita et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Modeling Ti-6Al-4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading

(2020) Kartik Kapoor et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy

(2020) Yu Zhou et al.   MATERIALS CHARACTERIZATION

Microplasticity at Room Temperature in α/β Titanium Alloys

(2020) S. Hémery et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microscale crystal slip and macroscopic cold creep transition in dwell fatigue

(2020) Zhen Zhang   INTERNATIONAL JOURNAL OF FATIGUE

Predicting dwell fatigue life in titanium alloys using modelling and experiment

(2020) Yilun Xu et al.   Nature Communications

Phase morphology, variants and crystallography of alloy microstructures in cold dwell fatigue

(2018) Zhen Zhang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Fractographical Analyses of Crack Initiation Site in High-cycle Fatigue for Ti–Fe–O Alloy at Low Temperature

(2018) Osamu Umezawa et al.   ISIJ INTERNATIONAL

Analysis of Subsurface Fatigue Crack Generation in Ti–Fe–O Alloy at Low Temperature

(2018) Weibo Li et al.   ISIJ INTERNATIONAL

In situ SEM investigation of slip transfer in Ti-6Al-4V: Effect of applied stress

(2018) S. Hémery et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of oxygen content on active deformation systems in pure titanium polycrystals

(2018) J.Q. Ren et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-Strength Ti-Based Alloys Containing Fe as One of the Main Alloying Elements

(2018) Dmitri V. Louzguine-Luzgin   MATERIALS TRANSACTIONS

Mechanical characterization and strain-rate sensitivity measurement of Ti-7333 alloy based on nanoindentation and crystal plasticity modeling

(2018) Mengqi Zhang et al.   Progress in Natural Science-Materials International

The effect of the beta phase on the micromechanical response of dual-phase titanium alloys

(2017) Patrick J. Ashton et al.   INTERNATIONAL JOURNAL OF FATIGUE

On cold dwell facet fatigue in titanium alloy aero-engine components

(2017) M.A. Cuddihy et al.   INTERNATIONAL JOURNAL OF FATIGUE

Increasing strength of a biomedical Ti-Nb-Ta-Zr alloy by alloying with Fe, Si and O

(2017) Josef Stráský et al.   Journal of the Mechanical Behavior of Biomedical Materials

Analysis of deformation inhomogeneity and slip mode of TA15 titanium alloy sheets during the hot tensile process based on crystal plasticity model

(2017) Jie Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Modeling and Characterization of Grain Boundaries and Slip Transmission in Dislocation Density-Based Crystal Plasticity

(2017) et al.   Crystals

A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys

(2016) Tea-Sung Jun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity

(2016) Zhen Zhang et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Experiments and crystal plasticity finite element simulations of nanoindentation on Ti–6Al–4V alloy

(2015) Fengbo Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Variation of work hardening rate by oxygen contents in pure titanium alloy

(2015) Duck-soo Kang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis

(2014) Jianke Qiu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Indentation studies in b.c.c. crystals with enhanced model of strain-gradient crystal plasticity

(2013) Murat Demiral et al.   COMPUTATIONAL MATERIALS SCIENCE

Effect of retained beta layer on slip transmission in Ti–6Al–2Zr–1Mo–1V near alpha titanium alloy during tensile deformation at room temperature

(2013) Dong He et al.   MATERIALS & DESIGN

Analysis of slip transfer and deformation behavior across the α/β interface in Ti–5Al–2.5Sn (wt.%) with an equiaxed microstructure

(2012) James R. Seal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strength evaluation ofαandβphases by nanoindentation in Ti–15Mo alloys with Fe and Al addition

(2011) X H Min et al.   MATERIALS SCIENCE AND TECHNOLOGY

Simulation of micro-indentation hardness of FCC single crystals by mechanism-based strain gradient crystal plasticity

(2010) W.B. Lee et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Observations of Facet Formation in Near-α Titanium and Comments on the Role of Hydrogen

(2010) A. L. Pilchak et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Determination of elastic constants of generally anisotropic inclined lamellar structure using line-focus acoustic microscopy

(2009) Jin-Yeon Kim et al.   JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA

Nucleation of cracks from shear-induced cavities in an α/β titanium alloy in fatigue, room-temperature creep and dwell-fatigue

(2008) P. Lefranc et al.   ACTA MATERIALIA

A cold dwell fatigue crack nucleation criterion for polycrystalline Ti-6242 using grain-level crystal plasticity FE Model

(2008) K KIRANE et al.   INTERNATIONAL JOURNAL OF FATIGUE