Numerical prediction on deposition growth and heat transfer characteristics burning high–sodium pulverized coal
出版年份 2021 全文链接
标题
Numerical prediction on deposition growth and heat transfer characteristics burning high–sodium pulverized coal
作者
关键词
Numerical simulation, Fly
出版物
FUEL
Volume 309, Issue -, Pages 122135
出版商
Elsevier BV
发表日期
2021-10-04
DOI
10.1016/j.fuel.2021.122135
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Large‐eddy simulation of coal combustion in 15 MW pilot‐scale boiler‐simulation facility
- (2021) Minmin Zhou et al. AICHE JOURNAL
- Biomass fly-ash deposition: Dependence of deposition rate on probe/particle temperature in 115–1200 °C range
- (2021) Roman Weber et al. FUEL
- On-site experimental study on fouling and heat transfer characteristics of flue gas heat exchanger for waste heat recovery
- (2021) Song-Zhen Tang et al. FUEL
- Modeling ash deposit growth rates for a wide range of solid fuels in a 100 kW combustor
- (2021) Seyedhassan Fakourian et al. FUEL PROCESSING TECHNOLOGY
- Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle
- (2021) Anusorn Chinsuwan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical analysis of particle dispersion and deposition in coal combustion using large-eddy simulation
- (2021) Min-min Zhou et al. FUEL
- Simulative prediction of ultrafine particulate matter formation by means of different pyrolysis models
- (2020) Christian Axt et al. FUEL
- A novel CO2-water leaching method for AAEM removal from coal: Suppression of PM formation and release during Zhundong coal combustion
- (2020) Zhao Xiong et al. FUEL
- Understanding the mechanism for the formation of initial deposition burning Zhundong coal: DFT calculation and experimental study
- (2020) Wang Yongzhen et al. FUEL
- Heat transfer and fouling deposition investigation on the titanium coated heat exchanger surface
- (2020) C.S. Oon et al. POWDER TECHNOLOGY
- Modeling of the submicron particles formation and initial layer ash deposition during high temperature oxy-coal combustion
- (2020) Zhonghua Zhan et al. PROCEEDINGS OF THE COMBUSTION INSTITUTE
- Dynamic CFD modeling evaluation of ash deposition behavior and morphology evolution with different tube arrangements
- (2020) Lin Mu et al. POWDER TECHNOLOGY
- Enrichment mechanism of arsenic in fine ash deposits during co-combustion of rice husk and coal
- (2020) Huimin Liu et al. FUEL
- Evolution of particulate matter in the post-combustion zone of Zhundong lignite
- (2020) Renhui Ruan et al. FUEL
- Numerical simulation of ash deposition behavior with a novel erosion model using dynamic mesh
- (2020) Hao Zhou et al. FUEL
- Investigation on Sodium Fate for High Alkali Coal during Circulating Fluidized Bed Combustion
- (2019) Jieqiang Ji et al. ENERGY & FUELS
- Radiative Properties of Coal Ash Deposits with Sintering Effects
- (2019) John Parra-Álvarez et al. ENERGY & FUELS
- Transformation characteristics of sodium, chlorine and sulfur of Zhundong coal during O2/CO2 combustion in circulating fluidized bed
- (2019) Dianbin Liu et al. ENERGY
- Simulating growth of ash deposit in boiler heat exchanger tube based on CFD dynamic mesh technique
- (2019) Zhimin Zheng et al. FUEL
- Release and migration characteristics of sodium and potassium in high alkali coal under oxy-fuel fluidized bed combustion condition
- (2019) Kaijun Yu et al. FUEL
- Investigation into scavenging of sodium and ash deposition characteristics during co-combustion of Zhundong lignite with an oil shale semi-coke of high aluminosilicate in a circulating fluidized bed
- (2019) Zhuo Liu et al. FUEL
- Parametric study on fouling mechanism and heat transfer characteristics of tube bundle heat exchangers for reducing fouling considering the deposition and removal mechanisms
- (2018) Song-Zhen Tang et al. FUEL
- Transformation behavior of alkali metals in high-alkali coals
- (2018) Yanquan Liu et al. FUEL PROCESSING TECHNOLOGY
- Large-eddy simulation of ash deposition in a large-scale laboratory furnace
- (2018) Min-min Zhou et al. PROCEEDINGS OF THE COMBUSTION INSTITUTE
- A comparison of turbulence models and two and three dimensional meshes for unsteady CFD ash deposition tools
- (2018) Manuel García Pérez et al. FUEL
- Numerical Investigation on Development of Initial Ash Deposition Layer for a High-Alkali Coal
- (2017) Chao Liu et al. ENERGY & FUELS
- The contribution of differently-sized ash particles to the fouling trends of a pilot-scale coal-fired combustor with an ash deposition CFD model
- (2017) Manuel García Pérez et al. FUEL
- Understanding the ash deposition formation in Zhundong lignite combustion through dynamic CFD modelling analysis
- (2017) Xin Yang et al. FUEL
- Quantification of the influence of parameters determining radiative heat transfer in an oxy-fuel operated boiler
- (2017) Tim Gronarz et al. FUEL PROCESSING TECHNOLOGY
- Effects of wall temperature on slagging and ash deposition of Zhundong coal during circulating fluidized bed gasification
- (2016) Xiaobin Qi et al. APPLIED THERMAL ENGINEERING
- Alkali Vapor Condensation on Heat Exchanging Surfaces: Laboratory-Scale Experiments and a Mechanistic CFD Modeling Approach
- (2016) Ulrich Kleinhans et al. ENERGY & FUELS
- Unsteady CFD analysis of kraft recovery boiler fly-ash trajectories, sticking efficiencies and deposition rates with a mechanistic particle rebound-stick model
- (2016) Manuel García Pérez et al. FUEL
- Measurements and CFD modeling of a pulverized coal flame with emphasis on ash deposition
- (2016) A.M. Beckmann et al. FUEL
- Characterisation of ash deposits on a probe at different temperatures during combustion of a Zhundong lignite in a drop tube furnace
- (2016) Jianbo Li et al. FUEL PROCESSING TECHNOLOGY
- Simulation of particle deposition on the tube in ash-laden flow using the lattice Boltzmann method
- (2016) Naihua Wang et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing
- (2015) Xuebin Wang et al. APPLIED THERMAL ENGINEERING
- Numerical modeling of fine particle and deposit formation in a recovery boiler
- (2014) A. Leppänen et al. FUEL
- Investigation of Slagging Characteristics in a 300 kW Test Furnace: Effect of Deposition Surface Temperature
- (2014) Hao Zhou et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Experimental Measurement of the Effective Thermal Conductivity of Ash Deposit for High Sodium Coal (Zhun Dong Coal) in a 300 KW Test Furnace
- (2013) Hao Zhou et al. ENERGY & FUELS
- Modelling and measurements of the characteristics of ash deposition and distribution in a HRSG of wastewater incineration plant
- (2012) Lin Mu et al. APPLIED THERMAL ENGINEERING
- Drag coefficients of variously shaped solid particles, drops, and bubbles
- (2011) G. I. Kelbaliyev THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now