A comparison of geometric imperfection models for collapse analysis of ship-type stiffened plated grillages

Photogrammetry image-based approach for imperfect structure modelling and FE analysis

(2021) Krzysztof Woloszyk et al.   OCEAN ENGINEERING

Post-buckling behavior of stiffened cylindrical shell and experimental validation under non-uniform external pressure and axial compression

(2021) Bo Wang et al.   THIN-WALLED STRUCTURES

Prediction of compression buckling load and buckling mode of hat-stiffened panels using artificial neural network

(2021) Zhenya Sun et al.   ENGINEERING STRUCTURES

Elasto-plastic buckling behaviour of aluminium alloy single-layer cylindrical reticulated shells with gusset joints

(2021) Zhe Xiong et al.   ENGINEERING STRUCTURES

The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads

(2021) Jonas W. Ringsberg et al.   MARINE STRUCTURES

Experimental and numerical investigation on ultimate strength of laser-welded stiffened plates considering welding deformation and residual stresses

(2021) Zhenfei Guo et al.   OCEAN ENGINEERING

A probabilistic approach to assess the computational uncertainty of ultimate strength of hull girders

(2021) Shen Li et al.   RELIABILITY ENGINEERING & SYSTEM SAFETY

Global buckling design of multi-celled CFST walls with four simply-supported edges

(2021) Si-Ming Zhou et al.   THIN-WALLED STRUCTURES

A mixed MLS and Hermite-type MLS method for buckling and postbuckling analysis of thin plates

(2021) Youssef Hilali et al.   Structures

Experimental investigations of buckling behaviour of steel scaffolds

(2021) C. Mercier et al.   Structures

A parametric study into the influence of strain hardening slope on the stability and collapse responses of steel tubes under compressive loading

(2021) A.R. Nazari et al.   Structures

Direct measurements and numerical predictions of welding-induced initial deformations in a full-scale steel stiffened plate structure

(2020) Myung Su Yi et al.   THIN-WALLED STRUCTURES

A novel reduced‐order modeling method for nonlinear buckling analysis and optimization of geometrically imperfect cylinders

(2020) Ke Liang et al.   INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING

Stochastic geometric imperfections of plate elements and their impact on the probabilistic ultimate strength assessment of plates and hull-girders

(2020) Dimitris G. Georgiadis et al.   MARINE STRUCTURES

Evaluating the influence of geometric distortions to the buckling capacity of stiffened panels

(2019) Konstantinos N. Anyfantis   THIN-WALLED STRUCTURES

Calibration of Design Buckling Curves for Lateral-Torsional Buckling of Cantilever Beams Made of Glass—Experimental and Numerical Investigations

(2019) Ralph Timmers et al.   Applied Sciences-Basel

Robust knockdown factors for the design of cylindrical shells under axial compression: potentials, practical application and reliability analysis

(2018) H.N.R. Wagner et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Buckling of quasi-perfect cylindrical shell under axial compression: A combined experimental and numerical investigation

(2018) Bo Wang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

On the free vibration of orthotropic and inhomogeneous with spatial coordinates plates resting on the inhomogeneous viscoelastic foundation

(2018) V. C. Haciyev et al.   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

Combined effect of imperfections on ultimate strength of cracked plates under uniaxial compression

(2018) Tian Xia et al.   OCEAN ENGINEERING

Robust knockdown factors for the design of cylindrical shells under axial compression: Analysis and modeling of stiffened and unstiffened cylinders

(2018) H.N.R. Wagner et al.   THIN-WALLED STRUCTURES

Influence of geometric imperfections on the ultimate strength of the double bottom of a Suezmax tanker

(2016) Segen F. Estefen et al.   ENGINEERING STRUCTURES

Collapse mechanisms and load–deflection curves of unstiffened and stiffened plated structures from bridge design

(2016) R. Timmers et al.   THIN-WALLED STRUCTURES

Overall buckling of lightweight stiffened panels using an adapted orthotropic plate method

(2015) S. Benson et al.   ENGINEERING STRUCTURES

Effect of Initial Imperfections on the Strength of Restrained Plates

(2015) José Manuel Gordo   JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME

Imperfection sensitivity of cylindrically curved steel panels

(2015) J.P. Martins et al.   THIN-WALLED STRUCTURES

Influence of imperfection distributions for cylindrical stiffened shells with weld lands

(2015) Peng Hao et al.   THIN-WALLED STRUCTURES

Evaluation of ultimate strength of stiffened panels under longitudinal thrust

(2014) Satoyuki Tanaka et al.   MARINE STRUCTURES

Worst Multiple Perturbation Load Approach of stiffened shells with and without cutouts for improved knockdown factors

(2014) Peng Hao et al.   THIN-WALLED STRUCTURES

Large-amplitude vibration of the geometrically imperfect FGM truncated conical shell

(2013) AH Sofıyev et al.   JOURNAL OF VIBRATION AND CONTROL

Compartment level progressive collapse analysis of lightweight ship structures

(2013) Simon Benson et al.   MARINE STRUCTURES

Load shortening characteristics of marine grade aluminium alloy plates in longitudinal compression

(2013) Simon Benson et al.   THIN-WALLED STRUCTURES

Influence of the initial imperfection on the non-linear buckling response of FGM truncated conical shells

(2011) A.H. Sofiyev   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Ultimate strength characteristics of aluminium plates for high-speed vessels

(2011) S. Benson et al.   Ships and Offshore Structures