Experimental Investigation of the Combustion Properties of an Average Thermal Runaway Gas Mixture from Li-Ion Batteries

Comprehensive Experimental and Simulation Study of the Ignition Delay Time Characteristics of Binary Blended Methane, Ethane, and Ethylene over a Wide Range of Temperature, Pressure, Equivalence Ratio, and Dilution

(2020) Mohammadreza Baigmohammadi et al.   ENERGY & FUELS

Laminar flame speed and shock-tube multi-species laser absorption measurements of Dimethyl Carbonate oxidation and pyrolysis near 1 atm

(2020) T. Atherley et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Speciation measurements in shock tubes for validation of complex chemical kinetics mechanisms: Application to 2-Methyl-2-Butene oxidation

(2020) S.A. Alturaifi et al.   COMBUSTION AND FLAME

Ignition delay time and H2O measurements during methanol oxidation behind reflected shock waves

(2019) L.T. Pinzón et al.   COMBUSTION AND FLAME

A review of lithium ion battery failure mechanisms and fire prevention strategies

(2019) Qingsong Wang et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Experimental study of ethanol oxidation behind reflected shock waves: Ignition delay time and H2O laser-absorption measurements

(2019) Olivier Mathieu et al.   COMBUSTION AND FLAME

Experimental study on flammability limits of electrolyte solvents in lithium-ion batteries using a wick combustion method

(2019) Feng Guo et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Explosion hazards from lithium-ion battery vent gas

(2019) Austin R. Baird et al.   JOURNAL OF POWER SOURCES

An experimental study: laminar flame speed sensitivity from spherical flames in stoichiometric CH4–air mixtures

(2018) Travis Sikes et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Identification and quantification of gases emitted during abuse tests by overcharge of a commercial Li-ion battery

(2018) Y. Fernandes et al.   JOURNAL OF POWER SOURCES

Concerning shock-tube ignition delay times: An experimental investigation of impurities in the H 2 /O 2 system and beyond

(2018) Clayton R. Mulvihill et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Assessment of modern detailed kinetics mechanisms to predict CO formation from methane combustion using shock-tube laser-absorption measurements

(2018) Olivier Mathieu et al.   FUEL

Holistic methodology for characterisation of the thermally induced failure of commercially available 18650 lithium ion cells

(2017) Michael Lammer et al.   RSC Advances

The effect of impurities on syngas combustion

(2015) Andrew B. Mansfield et al.   COMBUSTION AND FLAME

New reaction classes in the kinetic modeling of low temperature oxidation of n-alkanes

(2015) Eliseo Ranzi et al.   COMBUSTION AND FLAME

Overcharge failure investigation of lithium-ion batteries

(2015) QingFeng Yuan et al.   ELECTROCHIMICA ACTA

Comprehensive Comparison of Chemical Kinetics Mechanisms for Syngas/Biogas Mixtures

(2015) H. C. Lee et al.   ENERGY & FUELS

Ignition delay time measurements behind reflected shock-waves for a representative coal-derived syngas with and without NH 3 and H 2 S impurities

(2015) O. Mathieu et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Auto-ignition of biomass synthesis gas in shock tube at elevated temperature and pressure

(2015) Linqi Ouyang et al.   Science Bulletin

An assessment of chemical kinetics for bio-syngas combustion

(2014) M. Fischer et al.   FUEL

Shock tube study on ignition delay of multi-component syngas mixtures – Effect of equivalence ratio

(2014) Luong Dinh Thi et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Ignition and kinetic modeling of methane and ethane fuel blends with oxygen: A design of experiments approach

(2013) Christopher J. Aul et al.   COMBUSTION AND FLAME

An experimental and detailed chemical kinetic modeling study of hydrogen and syngas mixture oxidation at elevated pressures

(2013) Alan Kéromnès et al.   COMBUSTION AND FLAME

A Hierarchical and Comparative Kinetic Modeling Study of C1− C2Hydrocarbon and Oxygenated Fuels

(2013) Wayne K. Metcalfe et al.   INTERNATIONAL JOURNAL OF CHEMICAL KINETICS

A review on the laminar flame speed and ignition delay time of Syngas mixtures

(2013) H.C. Lee et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Laminar Flame Speed and Ignition Delay Time Data for the Kinetic Modeling of Hydrogen and Syngas Fuel Blends

(2013) Michael C. Krejci et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes

(2013) Andrey W. Golubkov et al.   RSC Advances

Shock-tube study of the ignition of multi-component syngas mixtures with and without ammonia impurities

(2012) O. Mathieu et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Laminar Flame Speed Measurements and Modeling of Pure Alkanes and Alkane Blends at Elevated Pressures

(2011) William Lowry et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

On the extraction of laminar flame speed and Markstein length from outwardly propagating spherical flames

(2010) Zheng Chen   COMBUSTION AND FLAME

An improved H2/O2 mechanism based on recent shock tube/laser absorption measurements

(2010) Zekai Hong et al.   COMBUSTION AND FLAME

A new shock tube study of the H+O2→OH+O reaction rate using tunable diode laser absorption of H2O near 2.5μm

(2010) Z. Hong et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Shock Tube Study of the Ignition of Lean CO/H2Fuel Blends at Intermediate Temperatures and High Pressure

(2008) Jürgen Herzler et al.   COMBUSTION SCIENCE AND TECHNOLOGY