Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations
出版年份 2021 全文链接
标题
Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations
作者
关键词
Fracture toughness, Reclaimed Asphalt Pavement (RAP) Material, Full range I/II Mode, Short Beam Bending (SBB), Semi-Circular Bending (SCB)
出版物
CONSTRUCTION AND BUILDING MATERIALS
Volume 314, Issue -, Pages 125590
出版商
Elsevier BV
发表日期
2021-11-16
DOI
10.1016/j.conbuildmat.2021.125590
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Effect of waste glass and curing aging on fracture toughness of self-compacting mortars using ENDB specimen
- (2021) Seyed Roohollah Mousavi et al. CONSTRUCTION AND BUILDING MATERIALS
- Advances in controlled release of microcapsules and promising applications in self-healing of asphalt materials
- (2021) Tong Lu et al. JOURNAL OF CLEANER PRODUCTION
- Contribution of Interface Fracture Mechanism on Fracture Propagation Trajectory of Heterogeneous Asphalt Composites
- (2021) Jianxin He et al. Applied Sciences-Basel
- On tensile fracture of a brittle rock
- (2021) Pouyan Asem et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Fracture -healing properties of asphalt mixtures and microwave heating thermo-sensitivity analysis of their constituent materials
- (2021) Shiping Fan et al. Journal of Cleaner Production
- Comparison of Testing Method Effects on Cracking Resistance of Asphalt Concrete Mixtures
- (2021) Dayong Yang et al. Applied Sciences-Basel
- Rheological behavior of asphalt binders and fatigue resistance of SMA mixtures modified with nano-silica containing RAP materials under the effect of mixture conditioning
- (2021) Neda Kamboozia et al. CONSTRUCTION AND BUILDING MATERIALS
- Performance Evaluation of Stone Matrix Asphalt Mixtures and Low-Temperature Properties of Asphalt Binders Containing Reclaimed Asphalt Pavement Materials Modified with Nanosilica
- (2021) Seyed Ataollah Saed et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Mixed mode fracture behavior of short-particle engineered wood
- (2021) Ehsan Torabi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Statistical assessment on relationship between fracture parameters of plain and fiber reinforced polymer concrete materials
- (2021) Hamid reza Karimi et al. COMPOSITES COMMUNICATIONS
- Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers
- (2020) S. Pirmohammad et al. ENGINEERING FRACTURE MECHANICS
- Fracture properties of asphalt mixtures containing electric arc furnace slag at low and intermediate temperatures
- (2020) S.M. Motevalizadeh et al. CONSTRUCTION AND BUILDING MATERIALS
- Self-healing capability of asphalt mixture containing polymeric composite fibers under acid and saline-alkali water solutions
- (2020) Benan Shu et al. JOURNAL OF CLEANER PRODUCTION
- Mode I and II fracture toughness investigation of Laser-Sintered Polyamide
- (2020) Emanoil Linul et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Influence of natural fibers on fracture strength of WMA (warm mix asphalt) concretes using a new fracture test specimen
- (2020) S. Pirmohammad et al. CONSTRUCTION AND BUILDING MATERIALS
- An extended edge-notched disc bend (ENDB) specimen for mixed-mode I+II fracture assessments
- (2020) A. Bahmani et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Feasibility and performance of the Semi-circular Bending test in evaluating the low-temperature performance of asphalt mortar
- (2020) Shu Yang et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of WMA-RAP technology on pavement performance of asphalt mixture: A state-of-the-art review
- (2020) Meng Guo et al. JOURNAL OF CLEANER PRODUCTION
- Effect of bitumen type, temperature and aging on mixed I/II fracture toughness of asphalt binders-Experimental and theoretical assessment
- (2020) MRM. Aliha et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Combined effect of waste polymer and rejuvenator on performance properties of reclaimed asphalt binder
- (2020) Daryoosh Daryaee et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of the notch curvature on the impact fracture of the three-point bending beam
- (2020) Chenxi Ding et al. ENGINEERING FRACTURE MECHANICS
- On the comparison of two mixed-mode I + III fracture test specimens
- (2020) A. Bahmani et al. ENGINEERING FRACTURE MECHANICS
- Fracture properties of rubberized concrete under different temperature and humidity conditions based on digital image correlation technique
- (2020) Juan Wang et al. JOURNAL OF CLEANER PRODUCTION
- Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review
- (2020) Shenghua Wu et al. JOURNAL OF CLEANER PRODUCTION
- Environmental impact evaluation and long-term rutting resistance performance of warm mix asphalt technologies
- (2020) Shenghua Wu et al. JOURNAL OF CLEANER PRODUCTION
- Achieving sustainability in roller compacted concrete pavement mixes using reclaimed asphalt pavement aggregates – state of the art review
- (2020) Solomon Debbarma et al. JOURNAL OF CLEANER PRODUCTION
- Rheological and physico-chemical properties of warm-mix recycled asphalt mastic containing high percentage of RAP binder
- (2020) Hui Xu et al. JOURNAL OF CLEANER PRODUCTION
- Influence of basalt fiber on mode I and II fracture properties of asphalt mixture at medium and low temperatures
- (2020) Qinglin Guo et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Influence of softer binder and rejuvenator on bituminous mixtures containing reclaimed asphalt pavement (RAP) material
- (2020) Sujit Kumar Pradhan et al. International Journal of Transportation Science and Technology
- Modified semi-circular bend test to determine the fracture toughness of anisotropic rocks
- (2019) Morteza Nejati et al. ENGINEERING FRACTURE MECHANICS
- Four-point bending tests for the fracture properties of concrete
- (2019) Yangyang Yin et al. ENGINEERING FRACTURE MECHANICS
- Aging effect on combined mode fracture resistance of bitumen
- (2019) Saied Shaker et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis
- (2019) H.R. Fattahi Amirdehi et al. CONSTRUCTION AND BUILDING MATERIALS
- Combined effects of steel fibers and water to cementitious materials ratio on the fracture behavior and brittleness of high strength concrete
- (2019) Seyed Mohammad Mousavi et al. ENGINEERING FRACTURE MECHANICS
- Comprehensive study on the crack tip parameters of two types of disc specimens under combined confining pressure and diametric concentrated forces
- (2019) Xiaoping Zhou et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading
- (2019) M.R.M. Aliha et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Fracture performance and numerical simulation of basalt fiber concrete using three-point bending test on notched beam
- (2019) Xinjian Sun et al. CONSTRUCTION AND BUILDING MATERIALS
- Fracture load prediction under mixed mode I + II using a stress based method for brittle materials tested with the asymmetric four-point bend specimen
- (2019) M.R.M. Aliha et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber
- (2019) Hassan Ziari et al. CONSTRUCTION AND BUILDING MATERIALS
- Sub-sized short bend beam configuration for the study of mixed-mode fracture
- (2019) M.R.M. Aliha et al. ENGINEERING FRACTURE MECHANICS
- Sustainable asphalt concrete containing high reclaimed asphalt pavements and recycling agents: Performance assessment, cost analysis, and environmental impact
- (2019) Hamid Jahanbakhsh et al. JOURNAL OF CLEANER PRODUCTION
- On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II
- (2019) S.S. Mousavi et al. POLYMER TESTING
- Comprehensive data for stress intensity factor and critical crack length in chevron notched semi-circular bend specimen subjected to tensile type fracture mode
- (2019) Eqlima Mahdavi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures
- (2019) M.R.M. Aliha et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Determining concrete fracture parameters using three-point bending beams with various specimen spans
- (2019) Yangyang Yin et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Field performance evaluation of asphalt mixtures containing high percentage of RAP using LTPP data
- (2018) Hongren Gong et al. CONSTRUCTION AND BUILDING MATERIALS
- Mixed mode tensile – In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions
- (2018) M. Fakhri et al. ENGINEERING FRACTURE MECHANICS
- Influence of rice husk ash on the fracture characteristics and brittleness of self-compacting concrete
- (2018) Elias Molaei Raisi et al. ENGINEERING FRACTURE MECHANICS
- EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials
- (2018) M.M. Mirsayar et al. ENGINEERING FRACTURE MECHANICS
- Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point single leg bending test
- (2018) Qinghui Liu et al. ENGINEERING STRUCTURES
- Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement
- (2018) Weimin Song et al. JOURNAL OF CLEANER PRODUCTION
- Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading
- (2018) M.R.M. Aliha et al. POLYMER TESTING
- Recycled stone mastic asphalt mixtures incorporating high rates of waste materials
- (2018) Sara R.M. Fernandes et al. CONSTRUCTION AND BUILDING MATERIALS
- Characterization of two-parameter fracture properties of portland cement concrete containing reclaimed asphalt pavement aggregates by semicircular bending specimens
- (2018) Xijun Shi et al. CEMENT & CONCRETE COMPOSITES
- Static and dynamic mode I fracture toughness of rigid PUR foams under room and cryogenic temperatures
- (2018) Emanoil Linul et al. ENGINEERING FRACTURE MECHANICS
- On predicting mode II fracture toughness (KIIc) of hot mix asphalt mixtures using the strain energy density criterion
- (2018) M.R.M. Aliha THEORETICAL AND APPLIED FRACTURE MECHANICS
- Experimental and numerical investigation of cracked chevron notched Brazilian disc specimen for fracture toughness testing of rock
- (2017) M.D. Wei et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion
- (2017) M. R. M. Aliha et al. Physical Mesomechanics
- An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling
- (2017) Liviu Marsavina et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens
- (2017) S.M.J. Razavi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion
- (2017) M. R. M. Aliha et al. Physical Mesomechanics
- The wear of Stone Mastic Asphalt due to slow speed high stress simulated laboratory trafficking
- (2016) David Woodward et al. CONSTRUCTION AND BUILDING MATERIALS
- Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens
- (2016) M.R.M. Aliha et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents
- (2016) M. R. M. Aliha et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Shear and mode II fracture of PUR foams
- (2015) Liviu Marsavina et al. ENGINEERING FAILURE ANALYSIS
- Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures
- (2014) M.R.M. Aliha et al. CONSTRUCTION AND BUILDING MATERIALS
- Size-dependent fracture behavior of Guiting limestone under mixed mode loading
- (2014) J. Akbardoost et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Reclaimed asphalt concretes with high recycling rates: Changes in reclaimed binder properties according to rejuvenating agent
- (2013) A. Dony et al. CONSTRUCTION AND BUILDING MATERIALS
- Refinements on fracture toughness of PUR foams
- (2013) Liviu Marsavina et al. ENGINEERING FRACTURE MECHANICS
- Theoretical analysis of Mode II cracks in a Compact Shear Specimen
- (2012) Vera E. Petrova et al. COMPUTATIONAL MATERIALS SCIENCE
- Numerical modelling crack propagation under Mode II fracture in plain concretes containing siliceous fly-ash additive using XFEM method
- (2012) G.L. Golewski et al. COMPUTATIONAL MATERIALS SCIENCE
- Evaluating fracture behavior of brittle polymeric materials using an IASCB specimen
- (2012) H. Saghafi et al. POLYMER TESTING
- Examination of the Mode II fracture behaviour of wood with a short crack in an asymmetric four-point bending test
- (2011) Cicilia Maria Erna Susanti et al. ENGINEERING FRACTURE MECHANICS
- Cracked asphalt pavement under traffic loading – A 3D finite element analysis
- (2011) M. Ameri et al. ENGINEERING FRACTURE MECHANICS
- Using waste plastic bottles as additive for stone mastic asphalt
- (2011) Esmaeil Ahmadinia et al. MATERIALS & DESIGN
- The fracture process zone in asphalt mixture at low temperature
- (2010) Xinjun Li et al. ENGINEERING FRACTURE MECHANICS
- An improved semi-circular bend specimen for investigating mixed mode brittle fracture
- (2010) M.R. Ayatollahi et al. ENGINEERING FRACTURE MECHANICS
- Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen
- (2008) Hiroshi Yoshihara ENGINEERING FRACTURE MECHANICS
- Brittle Fracture Analysis Using a Ring-Shape Specimen Containing Two Angled Cracks
- (2008) M. R. M. Aliha et al. INTERNATIONAL JOURNAL OF FRACTURE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started