A method for generating finite element models of wood boards from X-ray computed tomography scans
出版年份 2021 全文链接
标题
A method for generating finite element models of wood boards from X-ray computed tomography scans
作者
关键词
Fibre reconstruction, Feature reconstruction, CT scanning, Strength grading, Image analysis, Gradient structure tensor
出版物
COMPUTERS & STRUCTURES
Volume 260, Issue -, Pages 106702
出版商
Elsevier BV
发表日期
2021-11-21
DOI
10.1016/j.compstruc.2021.106702
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Voxel-based finite element modelling of wood elements based on spatial density and geometry data using computed tomography
- (2021) Jens U. Hartig et al. HOLZFORSCHUNG
- Local 3D fibre orientation for tensile strength prediction of European beech timber
- (2021) Andreas Rais et al. CONSTRUCTION AND BUILDING MATERIALS
- A holistic framework for designing for structural robustness in tall timber buildings
- (2020) Konstantinos Voulpiotis et al. ENGINEERING STRUCTURES
- A 3D model for knots and related fiber deviations in sawn timber for prediction of mechanical properties of boards
- (2019) Markus Lukacevic et al. MATERIALS & DESIGN
- Strength prediction of timber boards using 3D FE-analysis
- (2019) A. Khaloian Sarnaghi et al. CONSTRUCTION AND BUILDING MATERIALS
- Numerical modelling of timber and timber joints: computational aspects
- (2019) Carmen Sandhaas et al. WOOD SCIENCE AND TECHNOLOGY
- Modelling local bending stiffness based on fibre orientation in sawn timber
- (2018) Min Hu et al. European Journal of Wood and Wood Products
- A microstructure-based multisurface failure criterion for the description of brittle and ductile failure mechanisms of clear-wood
- (2017) Markus Lukacevic et al. ENGINEERING FRACTURE MECHANICS
- Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purpose
- (2017) Joffrey Viguier et al. European Journal of Wood and Wood Products
- Julia: A Fresh Approach to Numerical Computing
- (2017) Jeff Bezanson et al. SIAM REVIEW
- Growth layer and fibre orientation around knots in Norway spruce: a laboratory investigation
- (2017) Min Hu et al. WOOD SCIENCE AND TECHNOLOGY
- An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements
- (2016) Georg Kandler et al. CONSTRUCTION AND BUILDING MATERIALS
- Strength grading of sawn timber in Europe: an explanation for engineers and researchers
- (2016) Dan Ridley-Ellis et al. European Journal of Wood and Wood Products
- Strength grading on the basis of high resolution laser scanning and dynamic excitation: a full scale investigation of performance
- (2016) Anders Olsson et al. European Journal of Wood and Wood Products
- Method for the integral calculation of the fiber orientation and the fundamental material properties of softwood logs and lumber
- (2016) Pablo Guindos HOLZFORSCHUNG
- Finite element analysis of timber containing branches – An approach to model the grain course and the influence on the structural behaviour
- (2014) Christian Jenkel et al. ENGINEERING STRUCTURES
- Local variation of modulus of elasticity in timber determined on the basis of non-contact deformation measurement and scanned fibre orientation
- (2014) Min Hu et al. European Journal of Wood and Wood Products
- Numerical simulation tool for wooden boards with a physically based approach to identify structural failure
- (2014) Markus Lukacevic et al. European Journal of Wood and Wood Products
- Automated knot detection for high speed computed tomography on Pinus sylvestris L. and Picea abies (L.) Karst. using ellipse fitting in concentric surfaces
- (2013) Erik Johansson et al. COMPUTERS AND ELECTRONICS IN AGRICULTURE
- Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientation
- (2013) Anders Olsson et al. European Journal of Wood and Wood Products
- Implicit Image Differentiation and Filtering with Applications to Image Sharpening
- (2013) Alexander Belyaev SIAM Journal on Imaging Sciences
- Description of inhomogeneities in wooden structures: modelling of branches
- (2013) R. Lang et al. WOOD SCIENCE AND TECHNOLOGY
- Automatic knot detection and measurements from X-ray CT images of wood: A review and validation of an improved algorithm on softwood samples
- (2012) F. Longuetaud et al. COMPUTERS AND ELECTRONICS IN AGRICULTURE
- Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities
- (2009) Christophe Geuzaine et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Determination of the fibre orientation in composites using the structure tensor and local X-ray transform
- (2009) M. Krause et al. JOURNAL OF MATERIALS SCIENCE
- Comparison of 3D finite element analysis derived stiffness and BMD to determine the failure load of the excised proximal femur
- (2009) C.M. Langton et al. MEDICAL ENGINEERING & PHYSICS
- Fast quaternion slerp
- (2008) Mark Leeney INTERNATIONAL JOURNAL OF COMPUTER MATHEMATICS
- An efficient approach to converting three-dimensional image data into highly accurate computational models
- (2008) P.G Young et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now