4.7 Article

Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation

期刊

COMPOSITES PART B-ENGINEERING
卷 223, 期 -, 页码 -

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.compositesb.2021.109137

关键词

Kaolinitic sandstone clay; Thermal activation; Supplementary cementitious material; Pozzolanic reactivity; Dehydroxylation; Mortar strength test; Lime consumption

资金

  1. Rock Trade Industry - Waterfall Quarry (Queensland, Australia)
  2. NSFC [U2001225, 51878263, 51638008]

向作者/读者索取更多资源

This paper investigates the transformation of waste sandstone clay into high quality SCM through thermal activation. Activated sandstone clays (ASCs) showed high pozzolanic reactivity and can be used as SCM with rich mineral structure and pozzolanic activity. The study confirmed that even short time calcination improved the pozzolanic reactivity of ASCs, making them suitable for use in cementitious materials.
The present paper explores the methods of transforming low grade kaolinitic clay, sandstone clay, into supplementary cementitious material (SCM). The sandstone clay is the waste product in the sand manufacturing from sandstone mineral. Thermal calcination at 600-900 degrees C was applied to activate the initial sandstone clay. Microstructure characterization was then carried out on the obtained activated sandstone clays (ASCs) to study the microstructure and chemical changes during the thermal activation. The pozzolanic reactivity of ASCs were assessed by direct methods (isothermal calorimetry test and lime consumption test) and indirect method (strength measurement of ASC blended mortar). The compressive strength of the ASCs blended cement based mortar showed that ASCs possessed high pozzolanic reactivity through the dehydroxylation and the alternation of Al and Si coordination environments during thermal activation. Agglomeration occurred after the sandstone clay calcination, however the particle size was reduced. Even at a short time calcination for 1 h, the pozzolanic reactivity of ASCs improved as the calcination temperature increased from 600 to 900 degrees C. Mortar strength test results confirmed that the ASCs with a fineness similar to OPC, can be used as high quality SCMs. Further isothermal calorimetry results indicated that ASCs not only contributed to pozzolanic reaction but also had a good filler effect in the early hydration stage due to the existence of micro-quartz.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据