Improving the Separation of CO2/CH4 Using Impregnation of Deep Eutectic Solvents on Porous Carbon

Nanoporous Carbon Prepared from Palm Kernel Shell for CO2/CH4 Separation

(2020) Imam Prasetyo et al.   Waste and Biomass Valorization

Superior CO2 uptake on nitrogen doped carbonaceous adsorbents from commercial phenolic resin

(2020) Shenfang Liu et al.   Journal of Environmental Sciences-China

Highly Efficient Nitrogen-Doped Porous Carbonaceous CO2 Adsorbents Derived from Biomass

(2020) Ruixue Pang et al.   ENERGY & FUELS

Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf

(2020) Qian Li et al.   Journal of Environmental Sciences-China

Novel Nitrogen-Doped Porous Carbons Derived from Graphene for Effective CO2 Capture

(2019) Liying An et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

A highly stretchable, transparent and conductive wood fabricated by in-situ photopolymerization with polymerizable deep eutectic solvents

(2019) Ming Wang et al.   ACS Applied Materials & Interfaces

Improved CO2 adsorption capacity and CO2/CH4 and CO2/N2 selectivity in novel hollow silica particles by modification with multi-walled carbon nanotubes containing amine groups

(2019) Sara Zohdi et al.   POLYHEDRON

Adsorption separation of CH4/N2 on modified coal-based carbon molecular sieve

(2019) Zhiyuan Yang et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Recent developments on thermal municipal sludge pretreatment technologies for enhanced anaerobic digestion

(2019) Gokce Kor-Bicakci et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Recent advances on palm oil mill effluent (POME) pretreatment and anaerobic reactor for sustainable biogas production

(2019) Md Maniruzzaman A Aziz et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Modifying Nanoporous Carbon through Hydrogen Peroxide Oxidation for Removal of Metronidazole Antibiotics from Simulated Wastewater

(2019) Ariyanto et al.   Processes

Boosting Performance of Low Temperature Fuel Cell Catalysts by Subtle Ionic Liquid Modification

(2015) Gui-Rong Zhang et al.   ACS Applied Materials & Interfaces

Fabrication and CO 2 capture performance of silicon carbide derived carbons from polysiloxane

(2015) Liqun Duan et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)

(2015) Matthias Thommes et al.   PURE AND APPLIED CHEMISTRY

Evaluation of CO2 adsorption with eucalyptus wood based activated carbon modified by ammonia solution through heat treatment

(2014) Ava Heidari et al.   CHEMICAL ENGINEERING JOURNAL

Deep Eutectic Solvents (DESs) and Their Applications

(2014) Emma L. Smith et al.   CHEMICAL REVIEWS

High selectivity of TiC-CDC for CO2/N2 separation

(2013) Ana Silvestre-Albero et al.   CARBON

Review of recent advances in carbon dioxide separation and capture

(2013) Saeed Danaei Kenarsari et al.   RSC Advances

Adsorption separation of CO2, CH4, and N2 on microwave activated carbon

(2012) Honghong Yi et al.   CHEMICAL ENGINEERING JOURNAL

Impregnation of palm shell-based activated carbon with sterically hindered amines for CO2 adsorption

(2012) C.S. Lee et al.   CHEMICAL ENGINEERING JOURNAL

Study on the improvement of the capacity of amine-impregnated commercial activated carbon beds for CO2 adsorbing

(2011) Saad Hashim Khalil et al.   CHEMICAL ENGINEERING JOURNAL

Monolithic Carbon Molecular Sieves from activated bituminous coal impregnated with a slurry of coal tar pitch

(2011) J. Alcañiz-Monge et al.   FUEL PROCESSING TECHNOLOGY

Adsorption kinetics of various gases in carbon molecular sieves (CMS) produced from palm shell

(2007) M.A. Ahmad et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS