标题
Functional Importance of Surface Texture Parameters
作者
关键词
-
出版物
Materials
Volume 14, Issue 18, Pages 5326
出版商
MDPI AG
发表日期
2021-09-16
DOI
10.3390/ma14185326
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Interdependence of Amplitude Roughness Parameters on Rough Gaussian Surfaces
- (2020) Szeréna-Krisztina Fecske et al. TRIBOLOGY LETTERS
- The Influence of Disc Surface Topography after Vapor Blasting on Wear of Sliding Pairs under Dry Sliding Conditions
- (2020) Dzierwa et al. Coatings
- Watershed segmentation of topographical features on freeform surfaces and its application to additively manufactured surfaces
- (2020) S. Lou et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surfaces—topography and topology
- (2020) Gert W Wolf Surface Topography-Metrology and Properties
- Development of a novel method to characterize mean surface peak curvature as a signature of tribological performance of dental implant surfaces
- (2020) A Zabala et al. Surface Topography-Metrology and Properties
- Effect of directionally oriented random roughness on performance of a Rayleigh step bearing operating under Mixed-Elastohydrodynamic Lubrication
- (2020) Rahul Kumar et al. TRIBOLOGY INTERNATIONAL
- Effect of machined surface texture on fretting crack nucleation under radial loading in conformal contact
- (2020) Huiqing Gu et al. TRIBOLOGY INTERNATIONAL
- Material ratio curve as information on the state of surface topography—A review
- (2020) Pawel Pawlus et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- The effect of granularity on surface roughness and contact angle in wood sanding process
- (2020) Bin Luo et al. MEASUREMENT
- Cross-hatched groove influence on the load carrying capacity of parallel surfaces with random roughness
- (2020) W. Ma et al. TRIBOLOGY INTERNATIONAL
- A review of methods of random surface topography modeling
- (2020) Pawel Pawlus et al. TRIBOLOGY INTERNATIONAL
- Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining
- (2020) Chetan Agrawal et al. TRIBOLOGY INTERNATIONAL
- Influence of dimple shape on tribofilm formation and tribological properties of textured surfaces under full and starved lubrication
- (2019) Yufu Xu et al. TRIBOLOGY INTERNATIONAL
- Assessment of Topography Parameters During Running-In and Subsequent Rolling Contact Fatigue Tests
- (2019) Deepak K. Prajapati et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Introduction of a Surface Characterization Parameter Sdrprime for Analysis of Re-entrant Features
- (2019) A. Townsend et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- Influence of hydrostatic burnishing strategy on the surface topography of martensitic steel
- (2019) S. Świrad et al. MEASUREMENT
- Enhancement of steady state performance of hydrodynamic journal bearing using chevron-shaped surface texture
- (2019) Sanjay Sharma et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts
- (2019) Andreas Rosenkranz et al. ADVANCED ENGINEERING MATERIALS
- The dynamic performance analysis of chevron shape textured hydrodynamic bearings
- (2019) Gourav Jamwal et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Characterization and simulation of bi-Gaussian surfaces induced by material transfer and additive processes
- (2019) Songtao Hu et al. TRIBOLOGY INTERNATIONAL
- Effect of surface roughness and chemistry on the adhesion and durability of a steel-epoxy adhesive interface
- (2019) J.P.B. van Dam et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Characterization of the shape of height distribution of two-process profile
- (2019) Pawel Pawlus et al. MEASUREMENT
- Numerical study of normal contact stiffness: Non-Gaussian roughness and elastic–plastic behavior
- (2019) Meriem Belhadjamor et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Effects of initial surface topography and contact regimes on tribological behavior of AISI-52100/AA5083 materials’ pair when reciprocating sliding
- (2018) Fatma Elwasli et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modeling tangential contact based on non-Gaussian rough surfaces
- (2018) Wanglong Zhan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Multi-objective optimization on dimple shapes for gas face seals
- (2018) Xiuying Wang et al. TRIBOLOGY INTERNATIONAL
- Effects of cylinder liner surface topography on friction and wear of liner-ring system at low temperature
- (2018) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Evolutions of cylinder liner surface texture and tribological performance of piston ring-liner assembly
- (2018) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review
- (2018) Xiaoliang Liang et al. MEASUREMENT
- Generating randomly rough surfaces with given height probability distribution and power spectrum
- (2018) Francesc Pérez-Ràfols et al. TRIBOLOGY INTERNATIONAL
- A Simulation Method for Non-Gaussian Rough Surfaces Using Fast Fourier Transform and Translation Process Theory
- (2017) Yuechang Wang et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Towards a new definition of areal surface texture parameters on freeform surface
- (2017) Luca Pagani et al. MEASUREMENT
- Scale independent surface characterisation: Geography meets precision surface metrology
- (2017) Gert W. Wolf PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Influence of the real dimple shape on the performance of a textured mechanical seal
- (2017) M. Adjemout et al. TRIBOLOGY INTERNATIONAL
- Bi-Gaussian surface identification and reconstruction with revised autocorrelation functions
- (2017) Songtao Hu et al. TRIBOLOGY INTERNATIONAL
- An analysis of generated fractal and measured rough surfaces in regards to their multi-scale structure and fractal dimension
- (2017) Xiaohan Zhang et al. TRIBOLOGY INTERNATIONAL
- Effects of honed cylinder liner surface texture on tribological properties of piston ring-liner assembly in short time tests
- (2017) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Meeting the Contact-Mechanics Challenge
- (2017) Martin H. Müser et al. TRIBOLOGY LETTERS
- A critical assessment of surface texturing for friction and wear improvement
- (2017) C. Gachot et al. WEAR
- Fatigue Life Estimation of Medium-Carbon Steel with Different Surface Roughness
- (2017) Changyou Li et al. Applied Sciences-Basel
- The application of 3D-motif analysis to characterize diamond grinding wheel topography
- (2016) Ruifang Ye et al. MEASUREMENT
- Metrological changes in surface morphology of high-strength steels in manufacturing processes
- (2016) G.M. Krolczyk et al. MEASUREMENT
- Static friction at fractal interfaces
- (2016) Dorian A.H. Hanaor et al. TRIBOLOGY INTERNATIONAL
- Wear mechanism and morphologic space in ceramic honing process
- (2016) R.A. Mezari et al. WEAR
- Correlation between surface characteristics and static strength of adhesive-bonded magnesium AZ31B
- (2015) Rui Zheng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Contact mechanics of fractal surfaces by spline assisted discretisation
- (2015) Dorian A.H. Hanaor et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A Numerical Model to Study the Role of Surface Textures at Top Dead Center Reversal in the Piston Ring to Cylinder Liner Contact
- (2015) N. Morris et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Numerical Simulation Method of Rough Surfaces Based on Random Switching System
- (2015) Tingjian Wang et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- 3D surface parameters (ISO 25178-2): Actual meaning of Spk and its relationship to Vmp
- (2015) Luiz Alberto Franco et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Cross hatched texture influence on the load carrying capacity of oil control rings
- (2015) N. Biboulet et al. TRIBOLOGY INTERNATIONAL
- The effects of surface texture in reciprocating contacts – An experimental study
- (2015) Sorin-Cristian Vladescu et al. TRIBOLOGY INTERNATIONAL
- Surface topography and the impact on fatigue performance
- (2015) D T Ardi et al. Surface Topography-Metrology and Properties
- Tribological behaviours of textured surfaces under conformal and non-conformal starved lubricated contact conditions
- (2014) Slawomir Wos et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Proposals of methods of oil capacity calculation
- (2014) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Surface topography effect on strength of lap adhesive joints after mechanical pre-treatment
- (2013) W. Zielecki et al. Archives of Civil and Mechanical Engineering
- Fatigue performance of additive manufactured metallic parts
- (2013) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- The analysis of directionality of honed cylinder liners surfaces
- (2013) P. Pawlus et al. SCANNING
- Variability of areal surface topography parameters due to the change in surface orientation to measurement direction
- (2013) Andrzej Dzierwa et al. SCANNING
- How to select the most relevant 3D roughness parameters of a surface
- (2013) R. Deltombe et al. SCANNING
- Morphologic segmentation algorithms for extracting individual surface features from areal surface topography maps
- (2013) Nicola Senin et al. Surface Topography-Metrology and Properties
- The Effect of Polishing Technique on 3-D Surface Roughness and Gloss of Dental Restorative Resin Composites
- (2012) NS Ereifej et al. OPERATIVE DENTISTRY
- Modelling of plateau honed cylinder surface topography
- (2012) Rafal Reizer et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effects of negative skewness of surface roughness on the contact and lubrication of nominally flat metallic surfaces
- (2012) Liming Chang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- A fractal expansion of a three dimensional elastic–plastic multi-scale rough surface contact model
- (2012) A. Goedecke et al. TRIBOLOGY INTERNATIONAL
- The Effect of Texture Shape on the Load-Carrying Capacity of Gas-Lubricated Parallel Slider Bearings
- (2012) Mingfeng Qiu et al. TRIBOLOGY LETTERS
- A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study
- (2012) Y. Tian et al. WEAR
- A numerical model to investigate the effect of honing angle on the hydrodynamic lubrication between a combustion engine piston ring and cylinder liner
- (2011) A Spencer et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- The effect of dimple shapes on friction of parallel surfaces
- (2011) H Yu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Orientation effects of micro-grooves on sliding surfaces
- (2011) Sihuan Yuan et al. TRIBOLOGY INTERNATIONAL
- Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces
- (2011) Marko Sedlaček et al. TRIBOLOGY INTERNATIONAL
- Numerical characterisation of biomedical titanium surface texture using novel feature parameters
- (2011) Jian Wang et al. WEAR
- Milled die steel surface roughness correlation with steel sheet friction
- (2010) J. Berglund et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Feature based characterization of worn surfaces for a sliding test
- (2010) Q. Hao et al. TRIBOLOGY INTERNATIONAL
- Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions
- (2010) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- The use of surface segmentation methods to characterise laser zone surface structure on hard disc drives
- (2010) Liam Blunt et al. WEAR
- Characterization of geometrical properties of electroplated diamond tools and estimation of its grinding performance
- (2010) Mohd Fauzi Ismail et al. WEAR
- The study of cylinder liner plateau honing process
- (2009) P. Pawlus et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The Effect of Oil Pockets Shape and Distribution on Seizure Resistance in Lubricated Sliding
- (2009) Lidia Galda et al. TRIBOLOGY LETTERS
- Experimental study of the effect of microtexturing on oil lubricated ceramic/steel friction pairs
- (2009) K.-H. Zum Gahr et al. WEAR
- Alternative descriptions of roughness for cylinder liner production
- (2008) C. Anderberg et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- New cylinder liner surfaces for low oil consumption
- (2008) Staffan Johansson et al. TRIBOLOGY INTERNATIONAL
- Influence of surface preparation on roughness parameters, friction and wear
- (2008) M. Sedlaček et al. WEAR
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More