Highly Stable Quasi‐Solid‐State Lithium Metal Batteries: Reinforced Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 /Li Interface by a Protection Interlayer

Overcoming the Interfacial Limitations Imposed by the Solid–Solid Interface in Solid‐State Batteries Using Ionic Liquid‐Based Interlayers

(2020) Syed Atif Pervez et al.   Small

The Decay Mechanism Related to Structural and Morphological Evolution in Lithium‐Rich Cathode Materials for Lithium‐Ion Batteries

(2020) Qiong Liu et al.   ChemSusChem

Engineering high-energy-density sodium battery anodes for improved cycling with superconcentrated ionic-liquid electrolytes

(2020) Dmitrii A. Rakov et al.   NATURE MATERIALS

An In Situ Formed Surface Coating Layer Enabling LiCoO 2 with Stable 4.6 V High‐Voltage Cycle Performances

(2020) Yi Wang et al.   Advanced Energy Materials

Pathways for practical high-energy long-cycling lithium metal batteries

(2019) Jun Liu et al.   Nature Energy

Synthesis and Properties of NASICON‐type LATP and LAGP Solid Electrolytes

(2019) Hui Wang et al.   ChemSusChem

Dielectric and Structural Properties of Poly(vinylidene fluoride) (PVDF) and Poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) Filled with Magnesium Oxide Nanofillers

(2019) A. N. Arshad et al.   Journal of Nanomaterials

Enhancing the Electrochemical Performance of LiNi0.4Co0.2Mn0.4O2 by V2O5/LiV3O8 Coating

(2019) Zhen Chen et al.   ACS Applied Materials & Interfaces

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

(2019) Takahiro Yoshinari et al.   ACS Applied Materials & Interfaces

Constructing Multifunctional Interphase between Li 1.4 Al 0.4 Ti 1.6 (PO 4 ) 3 and Li Metal by Magnetron Sputtering for Highly Stable Solid‐State Lithium Metal Batteries

(2019) Xiaoge Hao et al.   Advanced Energy Materials

Solid‐State Lithium Batteries: Bipolar Design, Fabrication, and Electrochemistry

(2019) Kyu‐Nam Jung et al.   ChemElectroChem

Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte

(2019) Rochelle Weber et al.   Nature Energy

Interfacial Incompatibility and Internal Stresses in All‐Solid‐State Lithium Ion Batteries

(2019) Yanming He et al.   Advanced Energy Materials

4-V flexible all-solid-state lithium polymer batteries

(2019) Zhen Chen et al.   Nano Energy

Facile interfacial adhesion enabled LATP-based solid-state lithium metal battery

(2019) Zelin Yang et al.   CHEMICAL ENGINEERING JOURNAL

Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

(2018) Hoon-Hee Ryu et al.   CHEMISTRY OF MATERIALS

Hybrid electrolytes for lithium metal batteries

(2018) Marlou Keller et al.   JOURNAL OF POWER SOURCES

Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid-State Li Batteries

(2018) Yijie Liu et al.   Advanced Energy Materials

Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition

(2018) Yulong Liu et al.   ACS Applied Materials & Interfaces

Multilayered, Bipolar, All-Solid-State Battery Enabled by a Perovskite-Based Biphasic Solid Electrolyte

(2018) Hyun-Seop Shin et al.   ChemSusChem

Ionic liquid electrolyte with highly concentrated LiTFSI for lithium metal batteries

(2018) Haiqin Zhang et al.   ELECTROCHIMICA ACTA

Manganese phosphate coated Li[Ni0.6Co0.2Mn0.2]O2 cathode material: Towards superior cycling stability at elevated temperature and high voltage

(2018) Zhen Chen et al.   JOURNAL OF POWER SOURCES

MnPO4 -Coated Li(Ni0.4 Co0.2 Mn0.4 )O2 for Lithium(-Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics

(2018) Zhen Chen et al.   Advanced Energy Materials

Theoretical versus Practical Energy: A Plea for More Transparency in the Energy Calculation of Different Rechargeable Battery Systems

(2018) Johannes Betz et al.   Advanced Energy Materials

Compatibility issues between electrodes and electrolytes in solid-state batteries

(2017) Yaosen Tian et al.   Energy & Environmental Science

Safety of solid-state Li metal battery: Solid polymer versus liquid electrolyte

(2017) Alexis Perea et al.   JOURNAL OF POWER SOURCES

Facile synthesis of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte and its application for enhanced cyclic performance in lithium ion batteries through the introduction of an artificial Li3PO4 SEI layer

(2017) Jianyu Liu et al.   RSC Advances

Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects

(2017) Sen Xin et al.   ACS Energy Letters

Lithium battery chemistries enabled by solid-state electrolytes

(2017) Arumugam Manthiram et al.   Nature Reviews Materials

Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material

(2017) Jin-Myoung Lim et al.   Scientific Reports

Encapsulation of organic active materials in carbon nanotubes for application to high-electrochemical-performance sodium batteries

(2016) Jae-Kwang Kim et al.   Energy & Environmental Science

Beneficial effect of propane sultone and tris(trimethylsilyl) borate as electrolyte additives on the cycling stability of the lithium rich nickel manganese cobalt (NMC) oxide

(2016) Agnese Birrozzi et al.   JOURNAL OF POWER SOURCES

Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte

(2016) Weidong Zhou et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Ionic Liquid Electrolytes for Safer Lithium Batteries

(2016) M. Moreno et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts

(2016) Martin R. Busche et al.   Nature Chemistry

Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy

(2016) Kevin N. Wood et al.   ACS Central Science

Ionic-Liquid-Based Polymer Electrolytes for Battery Applications

(2015) Irene Osada et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

The effect of a solid electrolyte interphase on the mechanism of operation of lithium–sulfur batteries

(2015) E. Markevich et al.   Journal of Materials Chemistry A

Synthesis and properties of novel TEMPO-contained polypyrrole derivatives as the cathode material of organic radical battery

(2014) Lihuan Xu et al.   ELECTROCHIMICA ACTA

In Situ Formation of Protective Coatings on Sulfur Cathodes in Lithium Batteries with LiFSI-Based Organic Electrolytes

(2014) Hyea Kim et al.   Advanced Energy Materials

Degradation of NASICON-Type Materials in Contact with Lithium Metal: Formation of Mixed Conducting Interphases (MCI) on Solid Electrolytes

(2013) Pascal Hartmann et al.   Journal of Physical Chemistry C

Coated Lithium Powder (CLiP) Electrodes for Lithium-Metal Batteries

(2013) Jennifer Heine et al.   Advanced Energy Materials

The Current Move of Lithium Ion Batteries Towards the Next Phase

(2012) Tae-Hee Kim et al.   Advanced Energy Materials

Materials Challenges Facing Electrical Energy Storage

(2011) M. Stanley Whittingham   MRS BULLETIN

High ionic conductivity P(VDF-TrFE)/PEO blended polymer electrolytes for solid electrochromic devices

(2011) Chien A. Nguyen et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Environmentally benign batteries based on organic radical polymers

(2009) Hiroyuki Nishide et al.   PURE AND APPLIED CHEMISTRY

The Importance of Interphase Contacts in Li Ion Electrodes: The Meaning of the High-Frequency Impedance Arc

(2008) Miran Gaberscek et al.   ELECTROCHEMICAL AND SOLID STATE LETTERS

Suppression of dendritic lithium formation by using concentrated electrolyte solutions

(2008) Soon-Ki Jeong et al.   ELECTROCHEMISTRY COMMUNICATIONS

Lithium insertion in graphite from ternary ionic liquid-lithium salt electrolytesI. Electrochemical characterization of the electrolytes

(2008) Giovanni B. Appetecchi et al.   JOURNAL OF POWER SOURCES

Building better batteries

(2008) M. Armand et al.   NATURE