Effect of Water Vapor on Lifetime of 625 and 120 Foils During Oxidation Between 650 and 800 °C

Oxidation in Air at 1400 K and Optical Properties of Inconel 625, FeCrAlloy and Kanthal Super ER

(2020) Johann Colas et al.   OXIDATION OF METALS

High temperature air oxidation behavior of Hastelloy X processed by Electron Beam Melting (EBM) and Selective Laser Melting (SLM)

(2020) M. Romedenne et al.   CORROSION SCIENCE

Volatilization kinetics of chromium oxide, manganese oxide, and manganese chromium spinel at high temperatures in environments containing water vapor

(2019) Alexander Stenzel et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Effective Reduction of Chromium-oxy-hydroxide Evaporation from Ni-Base Alloy 690

(2019) T. Sand et al.   OXIDATION OF METALS

A comparison of the high-temperature oxidation behaviour of conventional wrought and laser beam melted Inconel 625

(2019) Nicolas Ramenatte et al.   CORROSION SCIENCE

In Situ Oxide Growth Characterization of Mn-Containing Ni–25Cr (wt%) Model Alloys at 1050 °C

(2017) T. Perez et al.   OXIDATION OF METALS

Effect of gas flow rate on oxidation behaviour of alloy 625 in wet air in the temperature range 900-1000 °C

(2016) P. Huczkowski et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Predicting Oxidation-Limited Lifetime of Thin-Walled Components of NiCrW Alloy 230

(2016) R. Duan et al.   OXIDATION OF METALS

The Influence of Cr Evaporation on Long Term Cr Depletion Rates in Ferritic Stainless Steels

(2015) R. Sachitanand et al.   OXIDATION OF METALS

Oxide Growth Characterization During Short-Time Oxidation of a Commercially Available Chromia-Forming Alloy (HR-120) in Air at 1,050 °C

(2013) X. Ledoux et al.   OXIDATION OF METALS

Predicting the depletion of chromium in two high temperature Ni alloys

(2012) R. Pillai et al.   CORROSION SCIENCE

Mechanistic-Based Lifetime Predictions for High-Temperature Alloys and Coatings

(2012) B. A. Pint et al.   JOM

Long-Term Performance of High-Temperature Foil Alloys in Water Vapor Containing Environment. Part II: Chromia Vaporization Behavior

(2012) Vinay P. Deodeshmukh   OXIDATION OF METALS

Long-Term Performance of High-Temperature Foil Alloys in Water Vapor Containing Environment. Part I: Oxidation Behavior

(2012) Vinay P. Deodeshmukh   OXIDATION OF METALS

Effects of water vapour on the oxidation of a nickel-base 625 alloy between 900 and 1,100 °C

(2011) H. Buscail et al.   JOURNAL OF MATERIALS SCIENCE

Sub-Scale Depletion and Enrichment Processes During High Temperature Oxidation of the Nickel Base Alloy 625 in the Temperature Range 900–1000 °C

(2010) A. Chyrkin et al.   OXIDATION OF METALS

Effect of water vapor on high-temperature oxidation of FeCr alloys

(2009) W. J. Quadakkers et al.   JOM

Steam Oxidation and Chromia Evaporation in Ultrasupercritical Steam Boilers and Turbines

(2009) Gordon R. Holcomb   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Comparison of Recuperator Alloy Degradation in Laboratory and Engine Testing

(2008) Bruce A. Pint et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Calculation of Reactive-evaporation Rates of Chromia

(2008) Gordon R. Holcomb   OXIDATION OF METALS

Microstructural changes in alloy 625 during high temperature creep

(2007) M.D. Mathew et al.   MATERIALS CHARACTERIZATION

Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases

(2007) J. Zurek et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING