Assessment of Process, Parameters, Residual Stress Mitigation, Post Treatments and Finite Element Analysis Simulations of Wire Arc Additive Manufacturing Technique
出版年份 2021 全文链接
标题
Assessment of Process, Parameters, Residual Stress Mitigation, Post Treatments and Finite Element Analysis Simulations of Wire Arc Additive Manufacturing Technique
作者
关键词
-
出版物
METALS AND MATERIALS INTERNATIONAL
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2021-08-24
DOI
10.1007/s12540-021-01015-5
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review
- (2021) G. M. Karthik et al. METALS AND MATERIALS INTERNATIONAL
- Effect of Longitudinal Magnetic Field on CMT Welding of Al-Alloy
- (2021) Peilei Zhang et al. METALS AND MATERIALS INTERNATIONAL
- Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by wire + arc additive manufacturing
- (2021) Zhanliang Yu et al. Journal of Manufacturing Processes
- A high-efficiency forming method of large- scale aluminum alloy components using fused deposition additive manufacturing based on multi-energy fields
- (2021) Xin Wang et al. Journal of Manufacturing Processes
- A shape control strategy for wire arc additive manufacturing of thin-walled aluminium structures with sharp corners
- (2021) Donghong Ding et al. Journal of Manufacturing Processes
- Accurate residual stress measurement as a function of depth in environmental barrier coatings via a combination of X-ray diffraction and Raman spectroscopy
- (2020) Cheng Ye et al. CERAMICS INTERNATIONAL
- Enhancing hardness of Inconel 718 deposits using the aging effects of cold metal transfer-based additive manufacturing
- (2020) Donghyun Van et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of subtransus heat treatments on microstructure features and mechanical properties of wire and arc additive manufactured Ti–6Al–4V alloy
- (2020) Jian Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-Cracking in Medium-Carbon Steel Layers Additively Deposited on Gray Cast Iron Using Directed Energy Deposition
- (2020) Seulbi Lee et al. METALS AND MATERIALS INTERNATIONAL
- Effects of Cooling Rate on the Microstructure and Tensile Properties of Wire-Arc Additive Manufactured Ti–6Al–4V Alloy
- (2020) Hui-Jun Yi et al. METALS AND MATERIALS INTERNATIONAL
- Influences of Latent Heat on Temperature Field, Weld Bead Dimensions and Melting Efficiency During Welding Simulation
- (2020) Bharat Singh et al. METALS AND MATERIALS INTERNATIONAL
- Influence of pulsed current arc welding to preclude the topological phases in the aerospace grade Alloy X
- (2020) M Sathishkumar et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Microstructural Characteristics of Wire Arc Additive Manufacturing with Inconel 625 by Super-TIG Welding
- (2020) Muralimohan Cheepu et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- CMT-Based Wire Arc Additive Manufacturing Using 316L Stainless Steel: Effect of Heat Accumulation on the Multi-Layer Deposits
- (2020) Seung Hwan Lee Metals
- Wire and arc additive manufacturing of aluminum alloy lattice structure
- (2020) Yongjie Li et al. Journal of Manufacturing Processes
- Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti–6Al–4V alloy
- (2020) Han Ye et al. MATERIALS CHARACTERIZATION
- Determination of the control points for circle and triangle route in wire arc additive manufacturing (WAAM)
- (2020) W. Ou et al. Journal of Manufacturing Processes
- An experimental-numerical study of active cooling in wire arc additive manufacturing
- (2020) William Hackenhaar et al. Journal of Manufacturing Processes
- Fabrication of metallic parts with overhanging structures using the robotic wire arc additive manufacturing
- (2020) Lei Yuan et al. Journal of Manufacturing Processes
- Development of Pulsed Current Arc Welding to Preclude Carbide Precipitates in Hastelloy X Weldment Using ERNiCr-3
- (2020) M. Sathishkumar et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- External filler wire based GMA-AM process of 2219 aluminum alloy
- (2020) Guangchao Liu et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of post heat treatment on the microstructure and mechanical properties of wire-arc additively manufactured A357 alloy components
- (2020) Xuewei Fang et al. MATERIALS LETTERS
- Micromechanical characterization of wire-arc additive manufactured and cast nickel aluminum bronze: Ambient and intermediate temperatures
- (2020) S.I. Shakil et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Sc Content on the Microstructure and Properties of Al–Mg–Sc Alloys Deposited by Wire Arc Additive Manufacturing
- (2020) Lingling Ren et al. METALS AND MATERIALS INTERNATIONAL
- Investigating Isotropy of Mechanical and Wear Properties in As-Deposited and Inter-Layer Cold Worked Specimens Manufactured by Wire Arc Additive Manufacturing
- (2020) Behzad Parvaresh et al. METALS AND MATERIALS INTERNATIONAL
- Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels
- (2020) R. Moharrami et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Effects of ultrasonic peening treatment in three directions on grain refinement and anisotropy of cold metal transfer additive manufactured Ti-6Al-4V thin wall structure
- (2020) Jian Gou et al. Journal of Manufacturing Processes
- Residual stress distributions in thick specimens excavated from a large circular wire+arc additive manufacturing mockup
- (2020) Chuan Liu et al. Journal of Manufacturing Processes
- Determination of surface mechanical property and residual stress stability for shot-peened SAF2507 duplex stainless steel by in situ X-ray diffraction stress analysis
- (2020) Ming Chen et al. Journal of Materials Research and Technology-JMR&T
- Identification of magnetic induced strain of electrical steels using non-destructive acceleration measurement and inverse vibration modeling
- (2020) E. Salloum et al. JOURNAL OF SOUND AND VIBRATION
- Process-microstructural features for tailoring fatigue strength of wire arc additive manufactured functionally graded material of SS904L and Hastelloy C-276
- (2020) A. Rajesh Kannan et al. MATERIALS LETTERS
- Determination of residual stress in resistance spot-welded joint by a novel X-ray diffraction
- (2020) Sansan Ao et al. MEASUREMENT
- Effects of heat distribution during cold metal transfer arc welding on galvanized steel using volumetric heat source model
- (2020) S.T. Selvamani et al. Journal of Materials Research and Technology-JMR&T
- Additive manufacturing method and different welding applications
- (2020) Elif Karayel et al. Journal of Materials Research and Technology-JMR&T
- A 3D dynamic analysis of different depositing processes used in wire arc additive manufacturing
- (2020) Jiankang Huang et al. Materials Today Communications
- Effect of crack-like defects on the fracture behaviour of Wire + Arc Additively Manufactured nickel-base Alloy 718
- (2020) Cui E. Seow et al. Additive Manufacturing
- Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing
- (2020) Lv Zhao et al. Additive Manufacturing
- 3D heat transfer, fluid flow and electromagnetic model for cold metal transfer wire arc additive manufacturing (Cmt-Waam)
- (2020) S. Cadiou et al. Additive Manufacturing
- Hot-wire arc additive manufacturing of aluminum alloy with reduced porosity and high deposition rate
- (2020) Rui Fu et al. MATERIALS & DESIGN
- Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
- (2019) Zhaopeng Tong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting
- (2019) Xiaodong Xing et al. Metals
- Study on microstructure and tensile properties of high nitrogen Cr-Mn steel processed by CMT wire and arc additive manufacturing
- (2019) Xiaoyong Zhang et al. MATERIALS & DESIGN
- Residual stress distribution in Ni-based superalloy turbine discs during fabrication evaluated by neutron/X-ray diffraction measurement and thermomechanical simulation
- (2019) Zhewei Zhang et al. MATERIALS & DESIGN
- Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling
- (2019) Bintao Wu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti 6Al 4V
- (2019) Jian Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of densification and microstructure of ASTM A131 EH36 steel samples additively manufactured via selective laser melting with varying laser scanning speed and hatch spacing
- (2019) Jingjing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Residual stress depth profiling of a coated WC-Co hardmetal - Part I of II: Equi-penetration grazing incidence X-ray diffraction (EP-GIXD) method
- (2019) P. Angerer et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Effect of titanium powder on microstructure and mechanical properties of wire + arc additively manufactured Al-Mg alloy
- (2019) Liwei Wang et al. MATERIALS LETTERS
- Comparative effect of Mn/Ti solute atoms and TiC/Ni3(Al,Ti) nano-particles on work hardening behaviour in Ni Cu alloys fabricated by wire arc additive manufacturing
- (2019) O.O. Marenych et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive Techniques to Refurbish Ni Based Components
- (2019) Eloisa Pereira Cardozo et al. Soldagem & Inspecao
- Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing
- (2019) Wang Yangfan et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Laser Shock Peening on Commercially Pure Titanium-1 Weldment Fabricated by Gas Tungsten Arc Welding Technique
- (2019) Sandeep Varin et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
- (2019) Tiago A. Rodrigues et al. Materials
- Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated
- (2019) Zewu Qi et al. Journal of Manufacturing Processes
- Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts
- (2019) Rong Li et al. Journal of Manufacturing Processes
- Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®
- (2019) G. Asala et al. CORROSION SCIENCE
- Heat treatment effects on Inconel 625 components fabricated by wire + arc additive manufacturing (WAAM)—part 1: microstructural characterization
- (2019) A. N. M. Tanvir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of electromagnetic nondestructive evaluation of residual strain in low carbon steels using the eddy current magnetic signature (EC-MS) method
- (2019) Takanori Matsumoto et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Measurement of residual stresses in titanium alloys using synchrotron radiation
- (2019) A. Umapathi et al. MEASUREMENT
- Corrosion and Creep Properties of Weld Beads Produced on AA5083-H111 Alloy Sheets Using SpinArc GMAW Process
- (2019) V. Poonguzhali et al. METALS AND MATERIALS INTERNATIONAL
- Research on the Microstructure Characteristic and Tensile Property of Laser-MIG Hybrid Welded Joint for 5A06 Aluminum Alloy
- (2019) Yanqiu Zhao et al. METALS AND MATERIALS INTERNATIONAL
- Heat Source Modeling in Selective Laser Melting
- (2019) Elham Mirkoohi et al. Materials
- Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components
- (2019) G. Marinelli et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy
- (2019) Yinghui Zhou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Measurement of residual stress in laser additive manufacturing TC4 titanium alloy with the laser ultrasonic technique
- (2019) Yu Zhan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Microstructural Constituents on Fusion Zone Corrosion Properties of GMA Welded AA 5083 with Novel Al–Mg Welding Wires of High Mg Contents
- (2019) Dileep Chandran Ramachandran et al. METALS AND MATERIALS INTERNATIONAL
- Direct Laser Deposition-Additive Manufacturing of Ti–15Mo Alloy: Effect of Build Orientation Induced Surface Topography on Corrosion and Bioactivity
- (2019) Tarun Bhardwaj et al. METALS AND MATERIALS INTERNATIONAL
- Dissimilar Cladding of Ni–Cr–Mo Superalloy over 316L Austenitic Stainless Steel: Morphologies and Mechanical Properties
- (2019) A. Evangeline et al. METALS AND MATERIALS INTERNATIONAL
- Investigation on the microstructure and corrosion properties of Inconel 625 alloy fabricated by wire arc additive manufacturing
- (2019) Yangfan Wang et al. Materials Research Express
- Effect of characteristic substrate parameters on the deposition geometry of CMT additive manufactured Al-6.3%Cu alloy
- (2019) Xuewei Fang et al. APPLIED THERMAL ENGINEERING
- Recent progress of residual stress measurement methods: A review
- (2019) Jiang GUO et al. Chinese Journal of Aeronautics
- Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel
- (2019) Fatemeh Hejripour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on microstructure and mechanical properties of Inconel718 components fabricated by UHFP-GTAW technology
- (2019) Zhihong Jia et al. MATERIALS LETTERS
- Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys
- (2019) Shivraman Thapliyal Materials Research Express
- Thermal-induced microstructural evolution and defect distribution of wire-arc additive manufacturing 2Cr13 part: Numerical simulation and experimental characterization
- (2019) Jinguo Ge et al. APPLIED THERMAL ENGINEERING
- Heat transfer, fluid flow and electromagnetic model of droplets generation and melt pool behaviour for wire arc additive manufacturing
- (2019) S. Cadiou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components
- (2019) Jinzhong Lu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process
- (2019) Xiaoqing Wang et al. Journal of Manufacturing Processes
- Influence of scanning length and energy input on residual stress reduction in metal additive manufacturing: Numerical and experimental studies
- (2019) Patcharapit Promoppatum et al. Journal of Manufacturing Processes
- Droplet transfer behavior in bypass-coupled wire arc additive manufacturing
- (2019) Jiankang Huang et al. Journal of Manufacturing Processes
- Wire + Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties
- (2019) Cui E. Seow et al. MATERIALS & DESIGN
- Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling
- (2019) Jianglong Gu et al. MATERIALS & DESIGN
- Process planning strategy for wire-arc additive manufacturing: Thermal behavior considerations
- (2019) Yun Zhao et al. Additive Manufacturing
- Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing
- (2018) Yangyang Lei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Correction to: Assessment of the effect of different forms of Inconel 625 alloy feedstock in Plasma Transferred Arc (PTA) additive manufacturing
- (2018) Eloisa Pereira Cardozo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing
- (2018) Xingwang Bai et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments
- (2018) M.J. Bermingham et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties
- (2018) Jinguo Ge et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening
- (2018) Rujian Sun et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy
- (2018) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel
- (2018) Yuehai Feng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- GMAW-based additive manufacturing of inclined multi-layer multi-bead parts with flat-position deposition
- (2018) Yongzhe Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue crack growth anisotropy, texture and residual stress in austenitic steel made by wire and arc additive manufacturing
- (2018) J.V. Gordon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy
- (2018) Wei Guo et al. SURFACE & COATINGS TECHNOLOGY
- Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
- (2018) J.R. Hönnige et al. MATERIALS & DESIGN
- Influence factors analysis and accuracy improvement for stress measurement using ultrasonic longitudinal critically refracted (LCR) wave
- (2018) Haibo Liu et al. APPLIED ACOUSTICS
- Fatigue properties and material characteristics of additively manufactured AlSi10Mg – Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties
- (2018) Emilie Beevers et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
- (2018) W. Ou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Influence of Shielding Gas Composition on Structure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625
- (2018) Ivan Jurić et al. JOM
- The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319
- (2018) E.M. Ryan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- IMPROVED DYNAMIC IMPACT BEHAVIOUR OF WIRE-ARC ADDITIVE MANUFACTURED ATI 718PLUS
- (2018) G. Asala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Solution Treatment Temperatures on Microstructure and Mechanical Properties of TIG–MIG Hybrid Arc Additive Manufactured 5356 Aluminum Alloy
- (2018) Wei Zuo et al. METALS AND MATERIALS INTERNATIONAL
- Study of Solidification Cracking Susceptibility during Laser Welding in an Advanced High Strength Automotive Steel
- (2018) Gautam Agarwal et al. Metals
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- A spatial periodicity of microstructural evolution and anti-indentation properties of wire-arc additive manufacturing 2Cr13 thin-wall part
- (2018) Jinguo Ge et al. MATERIALS & DESIGN
- Reducing arc heat input and obtaining equiaxed grains by hot-wire method during arc additive manufacturing titanium alloy
- (2018) Zixiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Measurement and modelling of residual stress in wire-feed additively manufactured titanium
- (2018) Bilal Ahmad et al. MATERIALS SCIENCE AND TECHNOLOGY
- 3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity
- (2018) Zhidong Zhang et al. OPTICS AND LASER TECHNOLOGY
- Enhancing mechanical properties of wire + arc additively manufactured INCONEL 718 superalloy through in-process thermomechanical processing
- (2018) Xiangfang Xu et al. MATERIALS & DESIGN
- Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
- (2018) C. Buchanan et al. ENGINEERING STRUCTURES
- Residual stress measurement by strain gauge and X-ray diffraction method in different shaped rails
- (2018) Muhammet Emre Turan et al. ENGINEERING FAILURE ANALYSIS
- Laser ultrasonic technology for residual stress measurement of 7075 aluminum alloy friction stir welding
- (2018) Yu Zhan et al. APPLIED ACOUSTICS
- Understanding of humping formation and suppression mechanisms using the numerical simulation
- (2017) Dongsheng Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Modelling and experimental validation of moving tilted volumetric heat source in gas metal arc welding process
- (2017) Aniruddha Ghosh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimization of wire feed for GTAW based additive manufacturing
- (2017) Haibin Geng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition
- (2017) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V
- (2017) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method
- (2017) Jian Lin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Obtaining uniform deposition with variable wire feeding direction during wire-feed additive manufacturing
- (2017) Qianru Wu et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental measurement of residual stress and distortion in additively manufactured stainless steel components with various dimensions
- (2017) M. Ghasri-Khouzani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical properties of bonding layers between low carbon steel and alloy 625 processed by gas tungsten arc welding
- (2017) Shuai Lou et al. METALS AND MATERIALS INTERNATIONAL
- Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis
- (2017) Kimiya Hemmesi et al. MATERIALS & DESIGN
- Measured strains correction for eccentric holes in the determination of non-uniform residual stresses by the hole drilling strain gauge method
- (2017) D. Peral et al. MATERIALS & DESIGN
- The influence of thermal field in the electric arc welding of X60 carbon steel components in the CO 2 environment
- (2016) Lenuţa Cîndea et al. APPLIED THERMAL ENGINEERING
- Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing
- (2016) M. A. Somashekara et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing
- (2016) Dongqing Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
- (2016) J.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing
- (2016) Takeyuki Abe et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing
- (2016) J.J. Lin et al. MATERIALS & DESIGN
- A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components
- (2016) Blanka A. Szost et al. MATERIALS & DESIGN
- Fatigue crack propagation behaviour in wire+arc additive manufactured Ti‐6Al‐4V: Effects of microstructure and residual stress
- (2016) Jikui Zhang et al. MATERIALS & DESIGN
- Experimental and numerical investigation of laser hot wire welding
- (2015) Wei Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Post-buckling modeling for strips under tension and residual stresses using asymptotic numerical method
- (2015) Sami Abdelkhalek et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
- (2015) Yan Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on Metal Magnetic Memory Testing Mechanism
- (2015) B. Liu et al. RESEARCH IN NONDESTRUCTIVE EVALUATION
- Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding
- (2014) Yan Ma et al. JOURNAL OF MATERIALS RESEARCH
- Effect of solid solution carbon on stress corrosion cracking of Alloy 600 in a primary water at 360°C
- (2014) Do Haeng Hur et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging
- (2013) Xingwang Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
- (2013) Paul A. Colegrove et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adaptive control of deposited height in GMAW-based layer additive manufacturing
- (2013) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
- (2013) Fujia Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
- (2013) Ahmed Hussein et al. MATERIALS & DESIGN
- Residual stress measurements in a ferritic steel/In625 superalloy dissimilar metal weldment using neutron diffraction and deep-hole drilling
- (2012) A. Skouras et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- An improved simulation of heat transfer and fluid flow in plasma arc welding with modified heat source model
- (2012) Yan Li et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive Manufacturing for product improvement at Red Bull Technology
- (2012) David E. Cooper et al. MATERIALS & DESIGN
- Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition
- (2012) F.J. Xu et al. MATERIALS & DESIGN
- Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements
- (2011) O. Muránsky et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Methods of measuring residual stresses in components
- (2011) N.S. Rossini et al. MATERIALS & DESIGN
- Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source
- (2009) S. Bag et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- On the evaluation of residual stresses in bi-layer materials using the bent strip method
- (2007) Terry Sanderson SURFACE & COATINGS TECHNOLOGY
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started