A three-dimensional large-deformation random finite-element study of landslide runout considering spatially varying soil

Coupled thermal–hydraulic modeling of artificial ground freezing with uncertainties in pipe inclination and thermal conductivity

(2021) Yong Liu et al.   Acta Geotechnica

Assessing the potential of soil moisture measurements for regional landslide early warning

(2020) Adrian Wicki et al.   Landslides

A large-deformation random finite-element study: failure mechanism and bearing capacity of spudcan in a spatially varying clayey seabed

(2019) Jiang Tao Yi et al.   GEOTECHNIQUE

Investigation of slope failure mode evolution during large deformation in spatially variable soils by random limit equilibrium and material point methods

(2019) Xin Liu et al.   COMPUTERS AND GEOTECHNICS

Estimation of intact undrained shear strength of clay using full-flow penetrometers

(2019) Jun Liu et al.   COMPUTERS AND GEOTECHNICS

Probabilistic analysis of post-failure behavior of soil slopes using random smoothed particle hydrodynamics

(2019) Yu Wang et al.   ENGINEERING GEOLOGY

Physical and Numerical Modeling of Dynamic Penetration of Ship Anchor in Clay

(2018) Congcong Han et al.   JOURNAL OF WATERWAY PORT COASTAL AND OCEAN ENGINEERING

Estimation of probability distribution of shear strength of slip zone soils in Middle Jurassic red beds in Wanzhou of China

(2017) Yang Wang et al.   Landslides

Probabilistic stability analyses of undrained slopes by 3D random fields and finite element methods

(2017) Yong Liu et al.   Geoscience Frontiers

Bayesian perspective on geotechnical variability and site characterization

(2016) Yu Wang et al.   ENGINEERING GEOLOGY

Large deformation finite element analyses in geotechnical engineering

(2015) Dong Wang et al.   COMPUTERS AND GEOTECHNICS

Effect of spatial variation of strength and modulus on the lateral compression response of cement-admixed clay slab

(2015) Y. Liu et al.   GEOTECHNIQUE

Large deformation finite-element modelling of progressive failure leading to spread in sensitive clay slopes

(2015) R. Dey et al.   GEOTECHNIQUE

Assessing the punch-through hazard of a spudcan on sand overlying clay

(2015) P. Hu et al.   GEOTECHNIQUE

Failure Mechanism and Bearing Capacity of Footings Buried at Various Depths in Spatially Random Soil

(2015) Jinhui Li et al.   JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING

Enhancement of random finite element method in reliability analysis and risk assessment of soil slopes using Subset Simulation

(2015) Dian-Qing Li et al.   Landslides

Numerical investigation of dynamic installation of torpedo anchors in clay

(2015) Y.H. Kim et al.   OCEAN ENGINEERING

Quantitative risk analysis for landslides: the case of the Three Gorges area, China

(2014) Ling Peng et al.   Landslides

An empirical model for landslide travel distance prediction in Wenchuan earthquake area

(2014) Deping Guo et al.   Landslides

Modified linear estimation method for generating multi-dimensional multi-variate Gaussian field in modelling material properties

(2014) Yong Liu et al.   PROBABILISTIC ENGINEERING MECHANICS

Effect of element sizes in random field finite element simulations of soil shear strength

(2012) Jianye Ching et al.   COMPUTERS & STRUCTURES

Practical reliability analysis of slope stability by advanced Monte Carlo simulations in a spreadsheet

(2010) Yu Wang et al.   CANADIAN GEOTECHNICAL JOURNAL

Influence of Spatial Variability on Slope Reliability Using 2-D Random Fields

(2009) D. V. Griffiths et al.   JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

(2008) H. Zhou et al.   GEOTECHNIQUE

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic-plastic soil constitutive model

(2008) Ha H. Bui et al.   INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS