标题
3D
printed hybrid bone constructs of
PCL
and dental pulp stem cells loaded
GelMA
作者
关键词
-
出版物
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
Volume -, Issue -, Pages -
出版商
Wiley
发表日期
2021-05-25
DOI
10.1002/jbm.a.37235
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Bioinks—materials used in printing cells in designed 3D forms
- (2021) Dilara Goksu Tamay et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Effect of PCL concentration on PCL/CaSiO3 porous composite scaffolds for bone engineering
- (2020) Huiping Shao et al. CERAMICS INTERNATIONAL
- Improved physical and osteoinductive properties of demineralized bone matrix by gelatin methacryloyl formulation
- (2020) Joana M. Ramis et al. Journal of Tissue Engineering and Regenerative Medicine
- GelMA combined with sustained release of HUVECs derived exosomes for promoting cutaneous wound healing and facilitating skin regeneration
- (2020) Danyang Zhao et al. JOURNAL OF MOLECULAR HISTOLOGY
- 3D-printed poly(Ɛ-caprolactone) scaffold with gradient mechanical properties according to force distribution in the mandible for mandibular bone tissue engineering
- (2020) Yasaman Zamani et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs
- (2020) Ji Hoon Park et al. Biofabrication
- Fiber reinforced GelMA hydrogel to induce the regeneration of corneal stroma
- (2020) Bin Kong et al. Nature Communications
- 3D Bioprinting of Oxygenated Cell‐Laden Gelatin Methacryloyl Constructs
- (2020) Ahmet Erdem et al. Advanced Healthcare Materials
- Application of bioactive hydrogels combined with dental pulp stem cells for the repair of large gap peripheral nerve injuries
- (2020) Lihua Luo et al. Bioactive Materials
- 3D bioprinting of a biomimetic meniscal scaffold for application in tissue engineering
- (2020) Zhou Jian et al. Bioactive Materials
- A Pyk2 inhibitor incorporated into a PEGDA-gelatin hydrogel promotes osteoblast activity and mineral deposition
- (2019) Sumana Posritong et al. Biomedical Materials
- Recent advances in photo-crosslinkable hydrogels for biomedical applications
- (2019) Jane Ru Choi et al. BIOTECHNIQUES
- Cell-laden interpenetrating network hydrogels formed from methacrylated gelatin and silk fibroin via a combination of sonication and photocrosslinking approaches
- (2019) Wenqian Xiao et al. Materials Science & Engineering C-Materials for Biological Applications
- Enhancing X-ray Attenuation of 3D Printed Gelatin Methacrylate (GelMA) Hydrogels Utilizing Gold Nanoparticles for Bone Tissue Engineering Applications
- (2019) Nehar Celikkin et al. Polymers
- Polymeric microgels for bone tissue engineering applications – a review
- (2019) Lalit Kumar Meena et al. International Journal of Polymeric Materials and Polymeric Biomaterials
- Vascularized Bone-Mimetic Hydrogel Constructs by 3D Bioprinting to Promote Osteogenesis and Angiogenesis
- (2019) Takahisa Anada et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- A pH-Triggered, Self-Assembled, and Bioprintable Hybrid Hydrogel Scaffold for Mesenchymal Stem Cell Based Bone Tissue Engineering
- (2019) Chen Zhao et al. ACS Applied Materials & Interfaces
- 3D Printed scaffolds with hierarchical biomimetic structure for osteochondral regeneration
- (2019) Xuan Zhou et al. Nanomedicine-Nanotechnology Biology and Medicine
- A collagen-based hydrogel containing tacrolimus for bone tissue engineering
- (2019) Mir Hamed Nabavi et al. Drug Delivery and Translational Research
- Cell Loaded GelMA:HEMA IPN hydrogels for corneal stroma engineering
- (2019) Cemile Kilic Bektas et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Gelatin Templated Polypeptide Co‐Cross‐Linked Hydrogel for Bone Regeneration
- (2019) Yusen Qiao et al. Advanced Healthcare Materials
- Multi-material 3D bioprinting of porous constructs for cartilage regeneration
- (2019) Laura Ruiz-Cantu et al. Materials Science & Engineering C-Materials for Biological Applications
- Three dimensional cell printing with sulfated alginate for improved bone morphogenetic protein-2 delivery and osteogenesis in bone tissue engineering
- (2018) Jisun Park et al. CARBOHYDRATE POLYMERS
- Injectable polysaccharide hydrogel embedded with hydroxyapatite and calcium carbonate for drug delivery and bone tissue engineering
- (2018) Bowen Ren et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Three-dimensional Porous PPF-co -PLGA Scaffolds for Tissue Engineering
- (2018) Wei Wu et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- 3D printed cell-laden collagen and hybrid scaffolds for in vivo articular cartilage tissue regeneration
- (2018) YoungWon Koo et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Systematic characterization of 3D-printed PCL/β-TCP scaffolds for biomedical devices and bone tissue engineering: Influence of composition and porosity
- (2018) Arnaud Bruyas et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting
- (2018) Fei Liu et al. Materials
- Biomimetic Mineralization of Three-Dimensional Printed Alginate/TEMPO-Oxidized Cellulose Nanofibril Scaffolds for Bone Tissue Engineering
- (2018) Ragab E. Abouzeid et al. BIOMACROMOLECULES
- Injectable hydrogel composite containing modified gold nanoparticles: implication in bone tissue regeneration
- (2018) Donghyun Lee et al. International Journal of Nanomedicine
- Hydroxyapatite/collagen coating on PLGA electrospun fibers for osteogenic differentiation of bone marrow mesenchymal stem cells
- (2018) Xing Yang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone
- (2018) Ali Entezari et al. Advanced Healthcare Materials
- Preparation of an injectable modified chitosan-based hydrogel approaching for bone tissue engineering
- (2018) Kanyarat Saekhor et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Preparation and characterization of poly(ε-caprolactone) scaffolds modified with cell-loaded fibrin gel
- (2018) Elbay Malikmammadov et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- PCL-TCP wet spun scaffolds carrying antibiotic-loaded microspheres for bone tissue engineering
- (2017) Elbay Malikmammadov et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- PCL and PCL-based materials in biomedical applications
- (2017) Elbay Malikmammadov et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Gelatin methacrylate scaffold for bone tissue engineering: The influence of polymer concentration
- (2017) Nehar Celikkin et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Collagen hydrogel scaffold promotes mesenchymal stem cell and endothelial cell coculture for bone tissue engineering
- (2017) Bao-Ngoc B. Nguyen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Novel 3D printed alginate–BFP1 hybrid scaffolds for enhanced bone regeneration
- (2017) Eun Young Heo et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Dental Pulp Stem Cells: Current Advances in Isolation, Expansion and Preservation
- (2017) Beatriz A. Rodas-Junco et al. Tissue Engineering and Regenerative Medicine
- Three-Dimensional Bioprinting of Polycaprolactone Reinforced Gene Activated Bioinks for Bone Tissue Engineering
- (2017) Gráinne M. Cunniffe et al. TISSUE ENGINEERING PART A
- Tuning Alginate Bioink Stiffness and Composition for Controlled Growth Factor Delivery and to Spatially Direct MSC Fate within Bioprinted Tissues
- (2017) Fiona E. Freeman et al. Scientific Reports
- 3D printed poly(ε-caprolactone) scaffolds modified with hydroxyapatite and poly(propylene fumarate) and their effects on the healing of rabbit femur defects
- (2017) Senem Buyuksungur et al. Biomaterials Science
- Dental Pulp Stem Cells: Current Advances in Isolation, Expansion and Preservation
- (2017) Beatriz A. Rodas-Junco et al. Tissue Engineering and Regenerative Medicine
- The effect of fiber size and pore size on cell proliferation and infiltration in PLLA scaffolds on bone tissue engineering
- (2016) Xuejun Wang et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering
- (2016) Weiguang Wang et al. Materials
- Gelatin-based Hydrogel Degradation and Tissue Interaction in vivo: Insights from Multimodal Preclinical Imaging in Immunocompetent Nude Mice
- (2016) Christoph Tondera et al. Theranostics
- Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering
- (2016) Daniela Filipa Duarte Campos et al. Advanced Healthcare Materials
- Endochondral bone formation in gelatin methacrylamide hydrogel with embedded cartilage-derived matrix particles
- (2015) Jetze Visser et al. BIOMATERIALS
- Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
- (2015) Kan Yue et al. BIOMATERIALS
- Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA
- (2015) Guifang Gao et al. BIOTECHNOLOGY LETTERS
- Osteoinduction of bone grafting materials for bone repair and regeneration
- (2015) Elena García-Gareta et al. BONE
- Hydrogels that allow and facilitate bone repair, remodeling, and regeneration
- (2015) Aaron R. Short et al. Journal of Materials Chemistry B
- Mineralized gelatin methacrylate-based matrices induce osteogenic differentiation of human induced pluripotent stem cells
- (2014) Heemin Kang et al. Acta Biomaterialia
- Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
- (2014) Luiz E Bertassoni et al. Biofabrication
- A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting
- (2014) Ju Young Park et al. Biofabrication
- Tailoring the Nanostructured Surfaces of Hydroxyapatite Bioceramics to Promote Protein Adsorption, Osteoblast Growth, and Osteogenic Differentiation
- (2013) Kaili Lin et al. ACS Applied Materials & Interfaces
- Stiff gelatin hydrogels can be photo-chemically synthesized from low viscous gelatin solutions using molecularly functionalized gelatin with a high degree of methacrylation
- (2012) Eva Hoch et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system
- (2012) Jin-Hyung Shim et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Bone tissue engineering: from bench to bedside
- (2012) Maria A. Woodruff et al. Materials Today
- Osteogenic differentiation of human dental pulp stem cells on β-tricalcium phosphate/poly (l-lactic acid/caprolactone) three-dimensional scaffolds
- (2012) Rashi Khanna-Jain et al. Journal of Tissue Engineering
- Bioprinting of hybrid tissue constructs with tailorable mechanical properties
- (2011) W Schuurman et al. Biofabrication
- Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology
- (2011) Jin-Hyung Shim et al. Biofabrication
- The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in anin vivomodel
- (2009) Sara M. Mantila Roosa et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Osteocalcin Secretion as an Early Marker of In Vitro Osteogenic Differentiation of Rat Mesenchymal Stem Cells
- (2009) Akifumi Nakamura et al. TISSUE ENGINEERING PART C-METHODS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now