Performance Assessment of Nano-enhanced Phase Change Material for Thermal

The use of nano phase change material in thermal energy storage applications appears promising, but the often-poor performance and the lack of understanding of the heat transfer mechanisms interconnectedness remains a challenge and hinders their widespread integration. The existing numerical work has unveiled numerous impediments in predicting the actual melting behaviour. They rarely combine the effects of conduction enhancement, convection degradation, and latent heat reduction, due to inaccurate characterization of the thermophysical properties and the limitations of their model assumptions. In the present study, an enhanced numerical approach was developed to investigate the melting performance of xGnP-octadecane filled in a vertica l cylindrical enclosure at different weight concentrations. The model results for the pure phase change material were compared and validated against the experimental data. The progression of the melting front, temperature probes, energy storage capacity and heat transfer rate of the nano phase change material were thoroughly evaluated. The current numerical observations demonstrate that the addition of nanoparticles improves, up to a critical concentration of 0.5wt%, the melting rate. The results showed that by adding 0.5wt% of xGnP in the base phase change material (octadecane), the melting rate decreases by 9.7% and the heat storage rate increases by 12.6%. However, at higher loadings, the heat transfer rate is deteriorated due to worsening of other thermophysical properties provoking the prevalence of viscous forces over natural convection and latent capacity. The system overall efficacy was found to be dependent on the net effects of relative changes of all thermophysical properties with nanoparticle concentration and temperature in the solid, so called mushy, and liquid zones. Finally, when characterizing nano phase change material, the thermal conductivity cannot be considered alone as a criterion for nano phase change material selection. A high thermal conductivity is needed for maximum heat absorption in thermal transport applications. Nevertheless, low viscosity, high latent heat and specific heat capacities are also essential to ensure a better thermal energy storage efficiency in terms of capacity and heat extraction/release rate. (C) 2021 Elsevier Ltd. All rights reserved.

Automated summary

The use of nano phase change materials in thermal energy storage shows potential, but challenges remain due to poor performance and limited understanding of heat transfer mechanisms. Adding nanoparticles can improve melting rate up to a critical concentration, but higher loadings may lead to reduced heat transfer efficiency.