Large eddy simulation on flame topologies and the blow-off characteristics of ammonia/air flame in a model gas turbine combustor

Emission analysis of the CH4/NH3/air co-firing fuels in a model combustor

(2021) Meng Zhang et al.   FUEL

Effect of hydrogen enrichment on swirl/bluff-body lean premixed flame stabilization

(2020) Shilong Guo et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Flame stability and emissions characteristics of liquid ammonia spray co-fired with methane in a single stage swirl combustor

(2020) Ekenechukwu C. Okafor et al.   FUEL

The blow-off and transient characteristics of co-firing ammonia/methane fuels in a swirl combustor

(2020) Meng Zhang et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Effect of hydrogen blending on the high temperature auto-ignition of ammonia at elevated pressure

(2020) Jundie Chen et al.   FUEL

Measurement and modelling of the laminar burning velocity of methane-ammonia-air flames at high pressures using a reduced reaction mechanism

(2019) Ekenechukwu Chijioke Okafor et al.   COMBUSTION AND FLAME

Measurements on flame structure of bluff body and swirl stabilized premixed flames close to blow-off

(2019) Weijie Zhang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Investigation on bluff-body and swirl stabilized flames near lean blowoff with PIV/PLIF measurements and LES modelling

(2019) Shilong Guo et al.   APPLIED THERMAL ENGINEERING

Predictions of NO and CO emissions in ammonia/methane/air combustion by LES using a non-adiabatic flamelet generated manifold

(2019) Takafumi Honzawa et al.   ENERGY

Emission characteristics of turbulent non-premixed ammonia/air and methane/air swirl flames through a rich-lean combustor under various wall thermal boundary conditions at high pressure

(2019) Kapuruge Don Kunkuma Amila Somarathne et al.   COMBUSTION AND FLAME

Numerical simulation of premixed combustion using the modified dynamic thickened flame model coupled with multi-step reaction mechanism

(2018) Shilong Guo et al.   FUEL

Dimensionally reduced modeling of nitric oxide formation for premixed methane-air flames with ammonia content

(2018) Joanna Jójka et al.   FUEL

Chemical kinetic modeling of ammonia oxidation with improved reaction mechanism for ammonia/air and ammonia/hydrogen/air combustion

(2018) Junichiro Otomo et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Power-to-ammonia in future North European 100 % renewable power and heat system

(2018) Jussi Ikäheimo et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Analysis of transient blow-out dynamics in a swirl-stabilized combustor using large-eddy simulations

(2018) Peter C. Ma et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Ammonia for power

(2018) A Valera-Medina et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Science and technology of ammonia combustion

(2018) Hideaki Kobayashi et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Numerical study assessing various ammonia/methane reaction models for use under gas turbine conditions

(2017) Hua Xiao et al.   FUEL

Experimental investigation of stabilization and emission characteristics of ammonia/air premixed flames in a swirl combustor

(2017) Akihiro Hayakawa et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Numerical study of a low emission gas turbine like combustor for turbulent ammonia/air premixed swirl flames with a secondary air injection at high pressure

(2017) Kapuruge Don Kunkuma Amila Somarathne et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Effect of mixture flow stratification on premixed flame structure and emissions under counter-rotating swirl burner configuration

(2016) Cheng Tung Chong et al.   APPLIED THERMAL ENGINEERING

Study on Reduced Chemical Mechanisms of Ammonia/Methane Combustion under Gas Turbine Conditions

(2016) Hua Xiao et al.   ENERGY & FUELS

Experimental and modeling study on the high-temperature oxidation of Ammonia and related NOx chemistry

(2015) Olivier Mathieu et al.   COMBUSTION AND FLAME

Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures

(2015) Akihiro Hayakawa et al.   FUEL

Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for methane and a high hydrogen content fuel in a generic swirl burner

(2013) N. Syred et al.   APPLIED ENERGY

Large eddy simulation of a growing turbulent premixed flame kernel using a dynamic flame surface density model

(2012) Gaofeng Wang et al.   COMBUSTION AND FLAME

Experimental and numerical analysis of a lean premixed stratified burner using 1D Raman/Rayleigh scattering and large eddy simulation

(2012) Guido Kuenne et al.   COMBUSTION AND FLAME

Performance characteristics of a compression-ignition engine using direct-injection ammonia–DME mixtures

(2012) Christopher W. Gross et al.   FUEL

Recent advances in hydrogen storage technologies based on nanoporous carbon materials

(2012) Seung Jae Yang et al.   Progress in Natural Science-Materials International

Combustion and emissions characteristics of compression-ignition engine using dual ammonia-diesel fuel

(2010) Aaron J. Reiter et al.   FUEL

Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism

(2009) A.A. Konnov   COMBUSTION AND FLAME

Using ammonia as a sustainable fuel

(2008) C. Zamfirescu et al.   JOURNAL OF POWER SOURCES

An experimental and kinetic modeling study of a premixed nitromethane flame at low pressure

(2008) Zhenyu Tian et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE