High-strength printed ceramic structures for higher temperature lubrication

Excellent lubrication properties of 3D printed ceramic bionic structures

(2020) Chao Chen et al.   CERAMICS INTERNATIONAL

Additive manufacturing of SiO2–Al2O3 refractory products via Direct Ink Writing

(2020) Kai Zhu et al.   CERAMICS INTERNATIONAL

Topology optimization of tribological composites for multifunctional performance at sliding interfaces

(2020) Xiu Jia et al.   COMPOSITES PART B-ENGINEERING

Infinite Approaching Superlubricity by Three-Dimensional Printed Structures

(2020) Yu Zhao et al.   ACS Nano

Fabrication and tribological behavior of self-lubricating composite impregnated with synthesized inorganic hollow fullerene-like MoS2

(2020) Abdul Salam et al.   COMPOSITES PART B-ENGINEERING

A novel fiber-fretting test for tribological characterization of the fiber/matrix interface

(2020) Joey Kabel et al.   COMPOSITES PART B-ENGINEERING

High-temperature tribological behaviors of ZrO2/h-BN/SiC composite under air and vacuum environments

(2020) Juanjuan Chen et al.   TRIBOLOGY INTERNATIONAL

Tribological behavior of boron nitride nanoplatelet reinforced Ni3Al intermetallic matrix composite fabricated by selective laser melting

(2019) Ying Song et al.   MATERIALS & DESIGN

3D Structural Strengthening Urchin-Like Cu(OH)2 -Based Symmetric Supercapacitors with Adjustable Capacitance

(2019) Peng Chang et al.   ADVANCED FUNCTIONAL MATERIALS

Surface 3-D lubrication structure design of Al2O3/Ni-laminated ceramics to improve tribological properties under combined environments

(2019) Hengzhong Fan et al.   APPLIED SURFACE SCIENCE

Wear performance of electrohydrodynamically atomized WS2 coatings deposited on biomimetic shark-skin textured surfaces

(2019) Xuemu Li et al.   TRIBOLOGY INTERNATIONAL

Laser deposition-additive manufacturing of ceramics/nanocrystalline intermetallics reinforced microlaminates

(2019) Jianing Li et al.   OPTICS AND LASER TECHNOLOGY

Influence of fiber diameters on fracture and tribological properties of Al2O3/MoS2 fibrous monolithic ceramic

(2019) Yunfeng Su et al.   TRIBOLOGY INTERNATIONAL

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

(2019) M.F. Arif et al.   COMPOSITES PART B-ENGINEERING

Coupling Effect of Morphology and Mechanical Properties Contributes to the Tribological Behaviors of Snake Scales

(2018) Long Zheng et al.   Journal of Bionic Engineering

Fabrication and tribological behavior of Al 2 O 3 /MoS 2 –BaSO 4 laminated composites doped with in situ formed BaMoO 4

(2018) Junjie Song et al.   TRIBOLOGY INTERNATIONAL

Self-lubricating composites containing MoS 2 : A review

(2018) Kaline Pagnan Furlan et al.   TRIBOLOGY INTERNATIONAL

Microstructure and properties of a new structure-function integrated C/C-SiC brake material

(2018) Shangwu Fan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and application of BN nanoparticles, nanosheets and their nanohybrids

(2018) Dmitry V. Shtansky et al.   Nanoscale

3D printing of ceramics: A review

(2018) Zhangwei Chen et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Structural superlubricity and ultralow friction across the length scales

(2018) Oded Hod et al.   NATURE

Internal damage evaluation of composite structures using phased array ultrasonic technique: Impact damage assessment in CFRP and 3D printed reinforced composites

(2018) M.A. Caminero et al.   COMPOSITES PART B-ENGINEERING

Key issues of MoSi2-UHTC ceramics for ultra high temperature heating element applications: Mechanical, electrical, oxidation and thermal shock behaviors

(2018) Lu Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High temperature solid-lubricating materials: A review

(2018) Shengyu Zhu et al.   TRIBOLOGY INTERNATIONAL

Tribological properties of Mo and CaF 2 added SiC matrix composites at elevated temperatures

(2017) Fei Li et al.   TRIBOLOGY INTERNATIONAL

Tribological Behaviors of 3D Needled C/C–SiC and FeSi75 Modified C/C–SiC Brake Pair

(2017) Juanli Deng et al.   TRIBOLOGY LETTERS

Tribological behavior and lubrication mechanism of self-lubricating ceramic/metal composites: The effect of matrix type on the friction and wear properties

(2017) Yunfeng Su et al.   WEAR

Rubber friction on 3D-printed randomly rough surfaces at low and high sliding speeds

(2017) Mona Mahboob Kanafi et al.   WEAR

Physical study of Eu doped MoO 3 thin films

(2016) O. Kamoun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The tribological properties of Ti3SiC2/Cu/Al/SiC composite at elevated temperatures

(2016) Wentao Dang et al.   TRIBOLOGY INTERNATIONAL

Surface engineering design of Al2O3/Mo self-lubricating structural ceramics - Part II: Continuous lubrication effects of a three-dimensional lubricating layer at temperatures from 25 to 800°C

(2016) Yuan Fang et al.   WEAR

Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface Structures

(2016) Frank Müller et al.   Materials

High temperature tribological properties of Ti3AlC2 ceramic against SiC under different atmospheres

(2015) Shuai Wang et al.   MATERIALS & DESIGN

Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation

(2015) Qiancheng Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Design and preparation of high-performance alumina functional graded self-lubricated ceramic composites

(2012) Y.E. Qi et al.   COMPOSITES PART B-ENGINEERING

The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior

(2012) Auezhan Amanov et al.   TRIBOLOGY INTERNATIONAL

Development of a texture averaged Reynolds equation

(2010) A. de Kraker et al.   TRIBOLOGY INTERNATIONAL

Hexagonal Surface Micropattern for Dry and Wet Friction

(2009) Michael Varenberg et al.   ADVANCED MATERIALS

Preliminary investigation of the effect of dimple size on friction in line contacts

(2009) Xiaolei Wang et al.   TRIBOLOGY INTERNATIONAL