Root-like C/SiC surface structure fabricated by the thermal and electrochemical corrosion for brazing to Nb
出版年份 2021 全文链接
标题
Root-like C/SiC surface structure fabricated by the thermal and electrochemical corrosion for brazing to Nb
作者
关键词
Surface structure, Fiber reinforcement, C/SiC composites, Braze
出版物
COMPOSITES PART B-ENGINEERING
Volume 218, Issue -, Pages 108942
出版商
Elsevier BV
发表日期
2021-04-23
DOI
10.1016/j.compositesb.2021.108942
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Process optimization, microstructure characterization and thermal properties of mesophase pitch-based carbon fiber reinforced aluminum matrix composites fabricated by vacuum hot pressing
- (2021) Chengnan Zhu et al. COMPOSITES PART B-ENGINEERING
- Continuous fibre-reinforced thermoplastic acrylic-matrix composites prepared by liquid resin infusion – A review
- (2021) Winifred Obande et al. COMPOSITES PART B-ENGINEERING
- Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method
- (2021) Junke Jiao et al. COMPOSITES PART B-ENGINEERING
- Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates
- (2020) Karthik Ramaswamy et al. COMPOSITES PART B-ENGINEERING
- Numerical modeling and experimental validation of fatigue damage in Cross-Ply CFRP composites under inhomogeneous stress states
- (2020) M. Brod et al. COMPOSITES PART B-ENGINEERING
- TEM study on the microstructure of the interface at the scale of nanometer formed between Cu-8 wt.% Ti melt and C/C preform
- (2020) K.X. Zhang et al. MATERIALS CHEMISTRY AND PHYSICS
- Reactive composite-diffusing brazing of Cf/SiC composite and stainless steel with (Cu–15Ti)+C filler material
- (2020) Yonglei Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano tungsten reinforced carbon cloth interlayer for brazing C/SiC composites to Nb
- (2020) Jin Ba et al. Journal of Manufacturing Processes
- Intelligent lubricating materials: A review
- (2020) Hanjun Gong et al. COMPOSITES PART B-ENGINEERING
- A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain
- (2020) Shun Guo et al. COMPOSITES PART B-ENGINEERING
- Stress induced carbon fiber orientation for enhanced thermal conductivity of epoxy composites
- (2020) Maohua Li et al. COMPOSITES PART B-ENGINEERING
- A novel composite interlayer assembled for C/SiC-GH99 brazed joints
- (2019) J.H. Yang et al. Journal of Manufacturing Processes
- Joining of Cf/SiC composite to GH783 superalloy with NiPdPtAu-Cr filler alloy and a Mo interlayer
- (2019) Wen-Wen Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- From ferroconcrete to Cf/UHTC-SiC: A totally novel densification method and mechanism at 1300 °C without pressure
- (2019) Ping Hu et al. COMPOSITES PART B-ENGINEERING
- Performance improvement of cryosorption pump by enhancing thermal conductivity of epoxy-aluminum composite
- (2019) Ravi Verma et al. COMPOSITES PART B-ENGINEERING
- Multiscale stochastic computational homogenization of the thermomechanical properties of woven Cf/SiCm composites
- (2019) Ho-Il Choi et al. COMPOSITES PART B-ENGINEERING
- The influence of thin film adhesives in pullout tests between nickel–titanium shape memory alloy and carbon fiber reinforced polymer matrix composites
- (2019) Derek Quade et al. COMPOSITES PART B-ENGINEERING
- On the metal thermoplastic composite interface of Ti alloy/UHMWPE-Elium® laminates
- (2019) Logesh Shanmugam et al. COMPOSITES PART B-ENGINEERING
- Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP
- (2019) Daxi Geng et al. COMPOSITES PART B-ENGINEERING
- Microstructural mechanism and mechanical properties of C f /SiC composite/TC4 alloy joints composite-diffusion brazed with TiZrCuNi + TiC p composite filler
- (2018) Wanli Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- C/SiC composite-Ti6Al4V joints brazed with negative thermal expansion ZrP2WO12 nanoparticle reinforced AgCu alloy
- (2018) J. Ba et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range
- (2018) Chenglong Hu et al. CORROSION SCIENCE
- Controlled deposition of density defects for understanding mechanical reduction on 2D C/SiC composites
- (2018) Hui Mei et al. COMPOSITES PART B-ENGINEERING
- Relief of the residual stresses in Si 3 N 4 /Invar joints by multi-layered braze structure – Experiments and simulation
- (2016) Tianpeng Wang et al. CERAMICS INTERNATIONAL
- Correlation between microstructure and mechanical properties of active brazed C f /SiC composite joints using Ti-Zr-Be
- (2016) Dongyu Fan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
- (2015) M Herrmann et al. CERAMICS INTERNATIONAL
- An Innovative Joint Structure for Brazing Cf/SiC Composite to Titanium Alloy
- (2014) X. Hernandez et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A novel approach to brazing C/C composite to Ni-based superalloy using alumina interlayer
- (2012) Yuanxun Shen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Easily made and handled carbon nanocones for scanning tunneling microscopy and electroanalysis
- (2011) Jiyapa Sripirom et al. CARBON
- Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites vacuum brazed with Ag–Cu filler metal
- (2011) Zhenwen Yang et al. MATERIALS CHARACTERIZATION
- Interfacial structure and fracture behavior of TiB whisker-reinforced C/SiC composite and TiAl joints brazed with Ti–Ni–B brazing alloy
- (2011) Z.W. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Brazing C/SiC composites and Nb with TiNiNb active filler metal
- (2011) Y Z Liu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Role of functional groups on the microwave attenuation and electric resistivity of activated carbon fiber cloth
- (2009) Zaher Hashisho et al. CARBON
- Energy absorption capability of nanocomposites: A review
- (2009) Lingyu Sun et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Electrochemical corrosion of silicon carbide ceramics
- (2009) U. Sydow et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Brazing of carbon fibre reinforced SiC composite and Ti alloy using Cu–Ti–C filler materials
- (2009) J. H. Xiong et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltration
- (2008) Jingjiang Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Joining of Cf/SiC composite to Ti alloy using composite filler materials
- (2008) J. Xiong et al. MATERIALS SCIENCE AND TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search