Auto-ignition and detonation of n-butanol and toluene reference fuel blends (TRF)

Autoignition and detonation development induced by a hot spot in fuel-lean and CO2 diluted n-heptane/air mixtures

(2019) Peng Dai et al.   COMBUSTION AND FLAME

Low temperature autoignition of 5-membered ring naphthenes: Effects of substitution

(2019) Aleksandr Fridlyand et al.   COMBUSTION AND FLAME

Assessment of the validity of RANS knock prediction using the resonance theory

(2019) Corinna Netzer et al.   International Journal of Engine Research

Temperature gradient induced detonation development inside and outside a hotspot for different fuels

(2019) Jiaying Pan et al.   COMBUSTION AND FLAME

Experimental and modelling study of the impacts of n-butanol blending on the auto-ignition behaviour of gasoline and its surrogate at low temperatures

(2018) Inna Gorbatenko et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Experimental Study on the Influence of n-Butanol Blending on the Combustion, Autoignition, and Knock Properties of Gasoline and Its Surrogate in a Spark-Ignition Engine

(2018) E. Agbro et al.   ENERGY & FUELS

Heat release analysis for rapid compression machines: Challenges and opportunities

(2018) S. Scott Goldsborough et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Three-stage heat release in n-heptane auto-ignition

(2018) S. Mani Sarathy et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

The influence of n -butanol blending on the ignition delay times of gasoline and its surrogate at high pressures

(2017) Edirin Agbro et al.   FUEL

Effect of initial temperature and fuel properties on knock characteristics in a rapid compression and expansion machine

(2017) Kimitoshi Tanoue et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Knocking combustion in spark-ignition engines

(2017) Zhi Wang et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Engine hot spots: Modes of auto-ignition and reaction propagation

(2016) Luke Bates et al.   COMBUSTION AND FLAME

Techno-Economic Analysis of Cellulosic Butanol Production from Corn Stover through Acetone–Butanol–Ethanol Fermentation

(2016) Nawa Raj Baral et al.   ENERGY & FUELS

LES study of deflagration to detonation mechanisms in a downsized spark ignition engine

(2015) A. Robert et al.   COMBUSTION AND FLAME

Developments in internal combustion engines and implications for combustion science and future transport fuels

(2015) G.T. Kalghatgi   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Determining predictive uncertainties and global sensitivities for large parameter systems: A case study for n -butane oxidation

(2015) Éric Hébrard et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

High-pressure low-temperature ignition behavior of syngas mixtures

(2014) Andrew B. Mansfield et al.   COMBUSTION AND FLAME

Alcohol combustion chemistry

(2014) S. Mani Sarathy et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Autoignitions and detonations in engines and ducts

(2012) D. Bradley   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Analysis of pre-ignition in highly charged SI engines: Emphasis on the auto-ignition mode

(2012) J. Rudloff et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Kinetic modeling of gasoline surrogate components and mixtures under engine conditions

(2010) Marco Mehl et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Measurements of Laminar Burning Velocities and Markstein Lengths ofn-Butanol−Air Premixed Mixtures at Elevated Temperatures and Pressures

(2009) Xiaolei Gu et al.   ENERGY & FUELS