标题
Sustainable materials for 3D concrete printing
作者
关键词
Sustainability, 3D printing, Cementitious binders, Low carbon binder, Low energy binder
出版物
CEMENT & CONCRETE COMPOSITES
Volume 122, Issue -, Pages 104156
出版商
Elsevier BV
发表日期
2021-06-30
DOI
10.1016/j.cemconcomp.2021.104156
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
- (2021) Manu K. Mohan et al. CONSTRUCTION AND BUILDING MATERIALS
- The role of limestone and calcined clay on the rheological properties of LC3
- (2020) Tafadzwa Ronald Muzenda et al. CEMENT & CONCRETE COMPOSITES
- Evaluating the printability of concretes containing lightweight coarse aggregates
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- 3D printing of a post-tensioned concrete girder designed by topology optimization
- (2020) Gieljan Vantyghem et al. AUTOMATION IN CONSTRUCTION
- A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing
- (2020) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological behavior of calcium sulfoaluminate cement paste with supplementary cementitious materials
- (2020) Guoju Ke et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheology and Mechanical Properties of Fly Ash-Based Geopolymer Mortars with Ground Granulated Blast Furnace Slag Addition
- (2020) Mateusz Sitarz et al. Energies
- Early hydration and hardening of OPC-CSA blends for cementitious structure of 3D printing
- (2020) Seonghoon Kim et al. Advances in Applied Ceramics
- Characteristics of components in calcined clays and their influence on the efficiency of superplasticizers
- (2020) Ricarda Sposito et al. CEMENT & CONCRETE COMPOSITES
- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- Opportunities and challenges for structural engineering of digitally fabricated concrete
- (2020) Costantino Menna et al. CEMENT AND CONCRETE RESEARCH
- On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
- (2020) Victor C. Li et al. CEMENT AND CONCRETE RESEARCH
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
- (2020) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D extrusion free forming of geopolymer composites: Materials modification and processing optimization
- (2020) Chenchen Sun et al. JOURNAL OF CLEANER PRODUCTION
- Ferrochrome ash – Its usage potential in alkali activated slag mortars
- (2020) Chethan Kumar B et al. JOURNAL OF CLEANER PRODUCTION
- Numerical simulations of concrete processing: From standard formative casting to additive manufacturing
- (2020) Nicolas Roussel et al. CEMENT AND CONCRETE RESEARCH
- Aggregate-bed 3D concrete printing with cement paste binder
- (2020) Shiwei Yu et al. CEMENT AND CONCRETE RESEARCH
- A study on fresh properties of limestone calcined clay blended cementitious systems
- (2020) Nithya Nair et al. CONSTRUCTION AND BUILDING MATERIALS
- Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering
- (2020) J. Van Der Putten et al. CONSTRUCTION AND BUILDING MATERIALS
- A rheology-based quasi-static shape retention model for digitally fabricated concrete
- (2020) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
- (2020) Manu K. Mohan et al. CEMENT AND CONCRETE RESEARCH
- Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
- (2020) Shravan Muthukrishnan et al. CONSTRUCTION AND BUILDING MATERIALS
- Environmental and economic assessment on 3D printed buildings with recycled concrete
- (2020) Yilong Han et al. JOURNAL OF CLEANER PRODUCTION
- Method of Optimisation for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
- (2019) Shin Bong et al. Materials
- Rheological Property Criteria for Buildable 3D Printing Concrete
- (2019) Hoseong Jeong et al. Materials
- Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context
- (2019) R. Gettu et al. MATERIALS AND STRUCTURES
- Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
- (2019) Guan Heng Andrew Ting et al. Journal of Material Cycles and Waste Management
- Effect of silica fume and slump-retaining polycarboxylate-based dispersant on the development of properties of portland cement paste
- (2019) Weina Meng et al. CEMENT & CONCRETE COMPOSITES
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- A systematical review of 3D printable cementitious materials
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- An indicator framework for quantifying the sustainability of concrete materials from the perspectives of global sustainable development
- (2019) Joel Opon et al. JOURNAL OF CLEANER PRODUCTION
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
- (2019) Chen et al. Applied Sciences-Basel
- Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders
- (2019) Hussam Alghamdi et al. MATERIALS & DESIGN
- Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
- (2019) Taylor Marchment et al. MATERIALS & DESIGN
- Structural failure during extrusion-based 3D printing processes
- (2019) R. J. M. Wolfs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Recent progress in low-carbon binders
- (2019) Caijun Shi et al. CEMENT AND CONCRETE RESEARCH
- Supplementary cementitious materials: New sources, characterization, and performance insights
- (2019) Maria C.G. Juenger et al. CEMENT AND CONCRETE RESEARCH
- Comparative LCA of recycled and natural aggregate concrete using Particle Packing Method and conventional method of design mix
- (2019) Subhasis Pradhan et al. JOURNAL OF CLEANER PRODUCTION
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
- (2019) Viktor Mechtcherine et al. AUTOMATION IN CONSTRUCTION
- Reactivity of supplementary cementitious materials (SCMs) in cement blends
- (2019) Jørgen Skibsted et al. CEMENT AND CONCRETE RESEARCH
- Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
- (2019) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Direct printing test for buildability of 3D-printable concrete considering economic viability
- (2019) Venkatesh Naidu Nerella et al. AUTOMATION IN CONSTRUCTION
- Investigation on the microstructure-related characteristics to elucidate performance of composite cement with limestone-calcined clay combination
- (2019) Yuvaraj Dhandapani et al. CEMENT AND CONCRETE RESEARCH
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion
- (2018) Dale P. Bentz et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
- (2018) Sarah Al-Qutaifi et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
- (2018) A.S.J. Suiker INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Carbon footprint of calcium sulfoaluminate clinker production
- (2018) Theodore Hanein et al. JOURNAL OF CLEANER PRODUCTION
- Large-scale 3D printing by a team of mobile robots
- (2018) Xu Zhang et al. AUTOMATION IN CONSTRUCTION
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport
- (2018) Hamed Maraghechi et al. MATERIALS AND STRUCTURES
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- Sustainability-based decision support framework for choosing concrete mixture proportions
- (2018) Ravindra Gettu et al. MATERIALS AND STRUCTURES
- Effect of Polypropylene Fibre Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
- (2018) Behzad Nematollahi et al. Materials
- Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement Paste
- (2018) Mingxu Chen et al. Materials
- Calcined clays for low carbon cement: Rheological behaviour in fresh Portland cement pastes
- (2018) C. Aramburo et al. MATERIALS LETTERS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Sustainable design and ecological evaluation of low binder self-compacting concrete
- (2017) Wu-Jian Long et al. JOURNAL OF CLEANER PRODUCTION
- Environmental design guidelines for digital fabrication
- (2017) Isolda Agustí-Juan et al. JOURNAL OF CLEANER PRODUCTION
- Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall
- (2017) Isolda Agustí-Juan et al. JOURNAL OF CLEANER PRODUCTION
- Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC
- (2017) Wei Huang et al. MATERIALS & DESIGN
- Calcined clay limestone cements (LC3)
- (2017) Karen Scrivener et al. CEMENT AND CONCRETE RESEARCH
- Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
- (2016) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material
- (2016) Elisabete R. Teixeira et al. JOURNAL OF CLEANER PRODUCTION
- Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders
- (2016) C. Gosselin et al. MATERIALS & DESIGN
- Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration
- (2015) Adrian Alujas et al. APPLIED CLAY SCIENCE
- Recent advances in understanding the role of supplementary cementitious materials in concrete
- (2015) Maria C.G. Juenger et al. CEMENT AND CONCRETE RESEARCH
- Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age
- (2015) S.W. Tang et al. CONSTRUCTION AND BUILDING MATERIALS
- Industrial trial to produce a low clinker, low carbon cement
- (2015) J. F. Martirena-Hernández et al. MATERIALES DE CONSTRUCCION
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- A study on the impact of different clay minerals on the dispersing force of conventional and modified vinyl ether based polycarboxylate superplasticizers
- (2014) L. Lei et al. CEMENT AND CONCRETE RESEARCH
- Understanding the Filler Effect on the Nucleation and Growth of C-S-H
- (2014) E. Berodier et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Slurry of metakaolin combined with limestone addition for self-compacted concrete. Application for precast industry
- (2013) Céline Perlot et al. CEMENT & CONCRETE COMPOSITES
- Concrete mix design based on water film thickness and paste film thickness
- (2013) Leo G. Li et al. CEMENT & CONCRETE COMPOSITES
- Accelerated carbonation – A potential approach to sequester CO2 in cement paste containing slag and reactive MgO
- (2013) Liwu Mo et al. CEMENT & CONCRETE COMPOSITES
- The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash
- (2013) Kirk Vance et al. CEMENT AND CONCRETE RESEARCH
- Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate
- (2013) Julien Bizzozero et al. CEMENT AND CONCRETE RESEARCH
- Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
- (2013) Louise K. Turner et al. CONSTRUCTION AND BUILDING MATERIALS
- Impact of metakaolin characteristics on the rheological properties of mortar in the fresh state
- (2012) F. Cassagnabère et al. CEMENT & CONCRETE COMPOSITES
- Effect of metakaolin dispersion on the fresh and hardened state properties of concrete
- (2012) H. Paiva et al. CEMENT AND CONCRETE RESEARCH
- Cement substitution by a combination of metakaolin and limestone
- (2012) M. Antoni et al. CEMENT AND CONCRETE RESEARCH
- Assessment of CO2 reduction of alkali-activated concrete
- (2012) Keun-Hyeok Yang et al. JOURNAL OF CLEANER PRODUCTION
- Combined effects of water film thickness and paste film thickness on rheology of mortar
- (2012) A. K. H. Kwan et al. MATERIALS AND STRUCTURES
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Effects of size fraction on composition and fundamental properties of Portland cement
- (2011) Tongsheng Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of supplementary cementitious materials on engineering properties of high strength concrete
- (2011) M.A. Megat Johari et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental investigation on aggregate interlocking concrete prepared with scattering–filling coarse aggregate process
- (2010) Weiguo Shen et al. CONSTRUCTION AND BUILDING MATERIALS
- Early hydration of calcium sulfoaluminate cement through electrical resistivity measurement and microstructure investigations
- (2010) Yishun Liao et al. CONSTRUCTION AND BUILDING MATERIALS
- Microstructures of reactive magnesia cement blends
- (2008) L.J. Vandeperre et al. CEMENT & CONCRETE COMPOSITES
- The effects of particle size distribution and surface area upon cement strength development
- (2008) I.B. Celik POWDER TECHNOLOGY
- The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete
- (2007) Halit Yazıcı CONSTRUCTION AND BUILDING MATERIALS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started