Carbon-alloyed Fe35Mn10Cr20Ni35 high entropy alloy synthesized by mechanical alloying plus spark plasma sintering

Micro- and mesoscale mechanical properties of an ultra-fine grained CrFeMnNi high entropy alloy produced by large strain machining

(2020) Jonathan G. Gigax et al.   SCRIPTA MATERIALIA

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

(2020) B.B. Bian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase evolution and mechanical properties of non-equiatomic Fe–Mn–Ni–Cr–Al–Si–C high entropy steel

(2020) Harsh Jain et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High-strength ultrafine-grained CoCrFeNiNb high-entropy alloy prepared by mechanical alloying: Properties and strengthening mechanism

(2020) Filip Průša et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

(2020) Benbin Xin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of a high entropy alloy with a eutectic composition (AlCoCrFeNi2.1) synthesized by mechanical alloying and spark plasma sintering

(2020) Rahul John et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructural features and tensile behaviors of a novel FeMnCoCr high entropy alloys

(2020) Fei Yang et al.   MATERIALS LETTERS

Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high-entropy alloys

(2020) Jin-Kun Xiao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of sintering temperature on microstructural and mechanical properties of SPS processed CoCrCuFeNi based ODS high entropy alloy

(2020) K. Raja Rao et al.   MATERIALS CHEMISTRY AND PHYSICS

Microstructural evolution and mechanical properties of AlCrFeNiCoC high entropy alloy produced via spark plasma sintering

(2019) Armin Emamifar et al.   POWDER METALLURGY

Remarkable strain-rate sensitivity of nanotwinned CoCrFeNi alloys

(2019) Wenyi Huo et al.   APPLIED PHYSICS LETTERS

Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures

(2019) Z.F. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon

(2019) Yi-Tao Wang et al.   Acta Metallurgica Sinica-English Letters

Nanoindentation behavior of high entropy alloys with transformation-induced plasticity

(2019) S. Sinha et al.   Scientific Reports

Neutron irradiation response of a Co-free high entropy alloy

(2019) Congyi Li et al.   JOURNAL OF NUCLEAR MATERIALS

In-situ formed heterogeneous grain structure in spark-plasma-sintered CoCrFeMnNi high-entropy alloy overcomes the strength-ductility trade-off

(2019) Feilong Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of irradiation on microstructure and hardening of Cr–Fe–Ni–Mn high-entropy alloy and its strengthened version

(2019) V.N. Voyevodin et al.   PHILOSOPHICAL MAGAZINE

Effect of C content on microstructure and tensile properties of as-cast CoCrFeMnNi high entropy alloy

(2018) Jian Chen et al.   MATERIALS CHEMISTRY AND PHYSICS

Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCu x high-entropy alloys

(2018) Xin Xian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A new type of high entropy alloy composite Fe 18 Ni 23 Co 25 Cr 21 Mo 8 WNb 3 C 2 prepared by mechanical alloying and hot pressing sintering

(2018) Chongfeng Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility

(2018) L.B. Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy

(2018) Hu Cheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical properties of the non-equiatomic FeMnNiCoCr high entropy alloy processed by differential speed rolling

(2018) H.T. Jeong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fatigue resistance of nanotwinned high-entropy alloy films

(2018) Wenyi Huo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ductile-brittle transition of carbon alloyed Fe40Mn40Co10Cr10 high entropy alloys

(2018) L.B. Chen et al.   MATERIALS LETTERS

Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys

(2017) Wenyi Huo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing

(2017) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and properties of CoCrCuFeNiMox high-entropy alloys fabricated by mechanical alloying and spark plasma sintering

(2017) Qiumin Yang et al.   POWDER METALLURGY

Microstructure and mechanical properties of CoCrFeNiZr x eutectic high-entropy alloys

(2017) Wenyi Huo et al.   MATERIALS & DESIGN

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel

(2016) Y.F. Shen et al.   ACTA MATERIALIA

The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe 40.4 Ni 11.3 Mn 34.8 Al 7.5 Cr 6 high entropy alloys

(2016) Zhangwei Wang et al.   ACTA MATERIALIA

Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co 25 Ni 25 Fe 25 Al 7.5 Cu 17.5 high-entropy alloy

(2016) Zhiqiang Fu et al.   ACTA MATERIALIA

Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation

(2016) N.A.P. Kiran Kumar et al.   ACTA MATERIALIA

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Williamson Hall Plot Analysis of the X-ray Diffraction Result of Synthesized Silver Nanocubes for the Determination of Their Elastic Properties

(2016) Ratan Das et al.  

Interstitial strengthening of a f.c.c. FeNiMnAlCr high entropy alloy

(2016) Zhangwei Wang et al.   MATERIALS LETTERS

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

(2015) Wei Ji et al.   INTERMETALLICS

Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys

(2015) N.D. Stepanov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys

(2015) Z. Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical behavior of a novel Co20Ni20Fe20Al20Ti20 alloy fabricated by mechanical alloying and spark plasma sintering

(2015) Zhiqiang Fu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr 18 FCC solid solution alloy

(2015) Z. Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tensile properties of the Cr–Fe–Ni–Mn non-equiatomic multicomponent alloys with different Cr contents

(2015) N.D. Stepanov et al.   MATERIALS & DESIGN

Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy

(2014) Chao Wang et al.   ADVANCED POWDER TECHNOLOGY

Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy

(2013) C. Zhu et al.   ACTA MATERIALIA

Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys

(2013) K.-Y. Tsai et al.   ACTA MATERIALIA

Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy

(2013) Weiping Chen et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering

(2013) Sicong Fang et al.   MATERIALS & DESIGN

Formation and Mechanical Properties of CoNiCuFeCr High-Entropy Alloys Coatings Prepared by Plasma Transferred Arc Cladding Process

(2013) J. B. Cheng et al.   PLASMA CHEMISTRY AND PLASMA PROCESSING

A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility

(2013) M.J. Yao et al.   SCRIPTA MATERIALIA

Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy

(2012) Chun Ng et al.   INTERMETALLICS

Alloying behavior and deformation twinning in a CoNiFeCrAl0.6Ti0.4 high entropy alloy processed by spark plasma sintering

(2012) Zhiqiang Fu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Compressive Behavior of Ti3AlC2and Ti3Al0.8Sn0.2C2MAX Phases at Room Temperature

(2012) G-P. Bei et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique

(2012) Zhiqiang Fu et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys

(2012) Tao-Tsung Shun et al.   MATERIALS CHARACTERIZATION

Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy

(2011) Can Huang et al.   SURFACE & COATINGS TECHNOLOGY

Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying

(2009) K.B. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and hardness characterization of mechanically alloyed Fe–C elemental powder mixture

(2009) Hussain Zuhailawati et al.   MATERIALS & DESIGN

Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe–18Mn–0.6C–1.5Al TWIP steel

(2009) Singon Kang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Temperature effect on rolling behavior of nano-twinned copper

(2009) Z.S. You et al.   SCRIPTA MATERIALIA