Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization

The effect of moulding process parameters on interlaminar properties of CF/PEEK composite laminates

(2020) Guangming Dai et al.   HIGH PERFORMANCE POLYMERS

Parameters Influencing the Outcome of Additive Manufacturing of Tiny Medical Devices Based on PEEK

(2020) Yiqiao Wang et al.   Materials

Influence of sanding and plasma treatment on shear bond strength of 3D-printed PEI, PEEK and PEEK/CF

(2020) Weijie Li et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Direct-Write Inkjet Printing of Nanosilver Ink (UTDAg) on PEEK Substrate

(2020) Aamir Hamad et al.   Journal of Manufacturing Processes

Higher Mechanical Performances of CF /PEEK Composite Laminates via Reducing Interlayer Porosity Based on the Affinity of Functional s-PEEK

(2019) Xiping Gao et al.   POLYMER COMPOSITES

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

(2019) Li et al.   Polymers

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

(2019) Xingting Han et al.   Journal of Clinical Medicine

Formability and Failure Mechanisms of Woven CF/PEEK Composite Sheet in Solid-State Thermoforming

(2019) Bing Zheng et al.   Polymers

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)

(2019) Leyu Lin et al.   COMPOSITES PART B-ENGINEERING

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

(2019) Bin Hu et al.   MECHANICS OF MATERIALS

Use of DMA-material pocket to determine the glass transition temperature of nitrocellulose blends in film form

(2019) Aislana Cole de Paula et al.   CARBOHYDRATE POLYMERS

Thermally stable and high impact toughness chopped PI fiber-reinforced PEEK composites

(2019) Jianan Yao et al.   HIGH PERFORMANCE POLYMERS

Highly boosting the interlaminar shear strength of CF/PEEK composites via introduction of PEKK onto activated CF

(2018) Elwathig A.M. Hassan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

(2018) А.А. Stepashkin et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling

(2018) Shenglong Jiang et al.   HIGH PERFORMANCE POLYMERS

Additive Manufacturing of PLA and CF/PLA Binding Layer Specimens via Fused Deposition Modeling

(2018) Yuhang Li et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

FDM process parameters influence over the mechanical properties of polymer specimens: A review

(2018) Diana Popescu et al.   POLYMER TESTING

Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

(2018) Feng Zhao et al.   Materials

Screw extrusion-based additive manufacturing of PEEK

(2018) Jian-Wei Tseng et al.   MATERIALS & DESIGN

Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts

(2018) Weiyi Lin et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis

(2018) Adrián Rodríguez-Panes et al.   Materials

Thermal, mechanical, and tribological properties of short carbon fibers/PEEK composites

(2017) Fangfang Li et al.   HIGH PERFORMANCE POLYMERS

Improvement in the mechanical and friction performance of poly(ether ether ketone) composites by addition of modificatory short carbon fibers and zinc oxide

(2017) Ying Hu et al.   HIGH PERFORMANCE POLYMERS

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

(2017) S. Berretta et al.   POLYMER TESTING

Structural characteristics of fused deposition modeling polycarbonate material

(2013) Walter Castro Smith et al.   POLYMER TESTING

Reconstruction esthétique de la voûte crânienne par implant sur mesure en PEEK

(2012) J.-M. Foletti et al.   REVUE DE STOMATOLOGIE ET DE CHIRURGIE MAXILLO-FACIALE

Use of Customized Polyetheretherketone (PEEK) Implants in the Reconstruction of Complex Maxillofacial Defects

(2009) Michael M. Kim et al.   Archives of Facial Plastic Surgery