The combined effect of CO2 and calcined hydrotalcite on one-coat limestone mortar properties

Evaluation of the physical-mechanical properties of cement-lime based masonry mortars produced with mixed recycled aggregates

(2020) R. L.S. Ferreira et al.   MATERIALES DE CONSTRUCCION

Functionalized Rutile TiO2 (110) as a Sorbent to Capture CO2 through Noncovalent Interactions: A Computational Investigation

(2019) Akshinthala Parameswari et al.   Journal of Physical Chemistry C

Influence of the nano TiO2 dispersion procedure on fresh and hardened rendering mortar properties

(2019) Sérgio Roberto Andrade Dantas et al.   CONSTRUCTION AND BUILDING MATERIALS

Physical and mechanical characterization of a commercial rendering mortar using destructive and non-destructive techniques

(2019) Guillermo Aragón et al.   CONSTRUCTION AND BUILDING MATERIALS

Role of layered double hydroxides in setting, hydration degree, microstructure and compressive strength of cement paste

(2018) Yueyue Wu et al.   APPLIED CLAY SCIENCE

Pilot testing of enhanced sorbents for calcium looping with cement production

(2018) María Erans et al.   APPLIED ENERGY

Relationship between the particle size and dosage of LDHs and concrete resistance against chloride ingress

(2018) Z.Y. Qu et al.   CEMENT AND CONCRETE RESEARCH

Carbon capture and storage (CCS): the way forward

(2018) Mai Bui et al.   Energy & Environmental Science

Structural Memory Effect of Mg–Al and Zn–Al layered Double Hydroxides in the Presence of Different Natural Humic Acids: Process and Mechanism

(2018) Zhisheng Gao et al.   LANGMUIR

Assessment of glass fibre reinforced polymer waste reuse as filler in mortars

(2018) Catarina Brazão Farinha et al.   JOURNAL OF CLEANER PRODUCTION

Effect of further water curing on compressive strength and microstructure of CO2-cured concrete

(2016) Pingping He et al.   CEMENT & CONCRETE COMPOSITES

Effect of curing conditions on the properties of lime, lime–metakaolin and lime–zeolite mortars

(2016) V. Pavlík et al.   CONSTRUCTION AND BUILDING MATERIALS

Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste

(2015) Yuxuan Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Prediction of Elastic Moduli Development of Cement Mortars Using Early Age Measurements

(2015) Saygın Deniz et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Carbon capture, storage and utilisation technologies: A critical analysis and comparison of their life cycle environmental impacts

(2015) Rosa M. Cuéllar-Franca et al.   Journal of CO2 Utilization

Carbonate looping experiments in a 1MWth pilot plant and model validation

(2014) Jochen Ströhle et al.   FUEL

Synthesis and characterization of modified hydrotalcites and their ion exchange characteristics in chloride-rich simulated concrete pore solution

(2013) Zhengxian Yang et al.   CEMENT & CONCRETE COMPOSITES

Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates

(2013) Shi-Cong Kou et al.   CEMENT & CONCRETE COMPOSITES

Physical and chemical assessment of lime–metakaolin mortars: Influence of binder:aggregate ratio

(2013) A. Gameiro et al.   CEMENT & CONCRETE COMPOSITES

Pesticides adsorption–desorption on Mg–Al mixed oxides. Kinetic modeling, competing factors and recyclability

(2013) R. Otero et al.   CHEMICAL ENGINEERING JOURNAL

Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications

(2013) Zhengxian Yang et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of layered double hydroxides on microstructure and carbonation resistance of sulphoaluminate cement concrete

(2013) Ping Duan et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental study on CO2 curing for enhancement of recycled aggregate properties

(2013) Baojian Zhan et al.   CONSTRUCTION AND BUILDING MATERIALS

Emerging energy-efficiency and CO2 emission-reduction technologies for cement and concrete production: A technical review

(2012) Ali Hasanbeigi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Water demand of amorphous nano silica and its impact on the workability of cement paste

(2011) G. Quercia et al.   CEMENT AND CONCRETE RESEARCH

High temperature adsorption of CO2 on Mg–Al hydrotalcite: Effect of the charge compensating anions and the synthesis pH

(2010) Qiang Wang et al.   CATALYSIS TODAY

Dependency of C–S–H carbonation rate on CO2 pressure to explain transition from accelerated tests to natural carbonation

(2010) N. Hyvert et al.   CEMENT AND CONCRETE RESEARCH

Experimental assessment of commercial one-coat renders for buildings façades

(2010) F. Hernández-Olivares et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of nano-silica on rheology and fresh properties of cement pastes and mortars

(2009) Luciano Senff et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives

(2009) Marcos Lanzón et al.   CONSTRUCTION AND BUILDING MATERIALS

Strength and workability of masonry mortars manufactured with ladle furnace slag

(2009) Ángel Rodriguez et al.   RESOURCES CONSERVATION AND RECYCLING

Rilem TC 203-RHM: Repair mortars for historic masonry. Testing of hardened mortars, a process of questioning and interpreting

(2008)   MATERIALS AND STRUCTURES

Studies on cement and mortar containing low-calcium fly ash, limestone, and dolomitic limestone

(2007) Bülent Yılmaz et al.   CEMENT & CONCRETE COMPOSITES

Stains in facades’ rendering – Diagnosis and maintenance techniques’ classification

(2006) Inês Flores-Colen et al.   CONSTRUCTION AND BUILDING MATERIALS