Cosmetic wastewater treatment by the ZVI/H2O2 process

The ZVI/H2O2 process was applied for cosmetic wastewater treatment. Two commercial zero-valent iron (ZVI) types with different granulations were chosen: Hepure Ferrox PRB and Hepure Ferrox Target. In addition, the pH and stirring method influence on ZVI/H2O2 process efficiency was studied. During the ZVI and ZVI/H2O2 processes, linear Fe ions concentration increase was observed. The addition of H2O2 significantly accelerated the iron dissolution process. The highest COD removal was obtained using finer ZVI (Hepure Ferrox Target) for doses of reagents ZVI/H2O2 1500/1600mg/L, in a H2O2/COD weight ratio 2:1, at pH 3.0 with stirring on a magnetic stirrer. After 120min of the process, 84.0% COD removal (from 796 to 127mg/L) was achieved. It was found that the efficiency of the process depends, as in the case of the Fenton process, on the ratio of the reagents (ZVI/H2O2) and their dose in relation to the COD (H2O2/COD) but does not depend on the dose of the iron itself. Statistical analysis confirms that COD removal efficiency depends primarily on H2O2/COD ratio and ZVI granulation, but ZVI dose influence is not statistically significant. The head space, solid-phase microextraction, gas chromatography, mass spectrometry results confirm high efficiency of the ZVI/H2O2 process.