标题
A review of nonlinear FFT-based computational homogenization methods
作者
关键词
-
出版物
ACTA MECHANICA
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2021-03-24
DOI
10.1007/s00707-021-02962-1
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Anderson‐accelerated polarization schemes for FFT ‐based computational homogenization
- (2021) Daniel Wicht et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Spectral methods for full-field micromechanical modelling of polycrystalline materials
- (2020) Ricardo A. Lebensohn et al. COMPUTATIONAL MATERIALS SCIENCE
- Computational homogenization of sheet molding compound composites based on high fidelity representative volume elements
- (2020) Johannes Görthofer et al. COMPUTATIONAL MATERIALS SCIENCE
- Phase mixture modeling of the grain size dependence of Young’s modulus and thermal conductivity of alumina and zirconia ceramics
- (2020) Tereza Uhlířová et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Smoothing interface stress oscillation of composite materials in FFT method by laminate theory
- (2020) Bing Wang et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Confinement Effect on Porosity and Permeability of Shales
- (2020) Jan Goral et al. Scientific Reports
- A dynamical view of nonlinear conjugate gradient methods with applications to FFT-based computational micromechanics
- (2020) Matti Schneider COMPUTATIONAL MECHANICS
- FFT-based solver for higher-order and multi-phase-field fracture models applied to strongly anisotropic brittle materials
- (2020) Ran Ma et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Fast implicit solvers for phase-field fracture problems on heterogeneous microstructures
- (2020) Felix Ernesti et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Tuning effective dynamical properties of periodic media by FFT-accelerated topological optimization
- (2020) Rémi Cornaggia et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Poisson’s ratio of porous and cellular materials with randomly distributed isometric pores or cells
- (2020) Tereza Uhlířová et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- On the micromechanics of deep material networks
- (2020) Sebastian Gajek et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Strain-gradient homogenization: A bridge between the asymptotic expansion and quadratic boundary condition methods
- (2020) Vincent Monchiet et al. MECHANICS OF MATERIALS
- Fourier spectral methods for phase field fracture modelling of CMCs
- (2020) B Pankowski MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- FFT-based homogenisation accelerated by low-rank tensor approximations
- (2020) Jaroslav Vondřejc et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- FFT based numerical homogenization method for porous conductive materials
- (2020) Quy-Dong To et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Effective response of heterogeneous materials using the recursive projection method
- (2020) Xiaoyao Peng et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Lippmann‐Schwinger solvers for the computational homogenization of materials with pores
- (2020) Matti Schneider INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Non-linear composite voxels for FFT-based explicit modeling of slip bands: Application to basal channeling in irradiated Zr alloys
- (2020) Aldo Marano et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Maximum-Entropy Based Estimates of Stress and Strain in Thermoelastic Random Heterogeneous Materials
- (2020) Maximilian Krause et al. JOURNAL OF ELASTICITY
- Investigation on the longitudinal compressive strength of unidirectional carbon fiber/nanoparticles reinforced polymer composites using FFT-based method
- (2020) Bing Wang et al. COMPOSITE STRUCTURES
- Efficient FFT-based upscaling of the permeability of porous media discretized on uniform grids with estimation of RVE size
- (2020) François Bignonnet COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Computation of macroscopic permeability of doubly porous media with FFT based numerical homogenization method
- (2020) Sarra Mezhoud et al. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS
- A novel FFT-based phase field model for damage and cracking behavior of heterogeneous materials
- (2020) Y.J. Cao et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A computational multi-scale model for the stiffness degradation of short-fiber reinforced plastics subjected to fatigue loading
- (2020) Jonathan Köbler et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A multiscale FE-FFT framework for electro-active materials at finite strains
- (2019) Felix Selim Göküzüm et al. COMPUTATIONAL MECHANICS
- On the Barzilai-Borwein basic scheme in FFT-based computational homogenization
- (2019) Matti Schneider INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Stochastic 3D Modeling of Three-Phase Microstructures for Predicting Transport Properties: A Case Study
- (2019) M. Neumann et al. TRANSPORT IN POROUS MEDIA
- Homogenization of cortical bone reveals that the organization and shape of pores marginally affect elasticity
- (2019) Xiran Cai et al. Journal of the Royal Society Interface
- Quantifying the influence of microstructure on effective conductivity and permeability: virtual materials testing
- (2019) Matthias Neumann et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- An algorithm for stress and mixed control in Galerkin based FFT homogenization
- (2019) S. Lucarini et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Lippmann-Schwinger solvers for the explicit jump discretization for thermal computational homogenization problems
- (2019) Christian Dorn et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Adaptive restart of accelerated gradient methods under local quadratic growth condition
- (2019) Olivier Fercoq et al. IMA JOURNAL OF NUMERICAL ANALYSIS
- On polarization-based schemes for the FFT-based computational homogenization of inelastic materials
- (2019) Matti Schneider et al. COMPUTATIONAL MECHANICS
- Stochastic Homogenisation of Free-Discontinuity Problems
- (2019) Filippo Cagnetti et al. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS
- Rock compressibility from microcomputed tomography images: Controls on digital rock simulations
- (2019) Nishank Saxena et al. GEOPHYSICS
- Electro-chemo-mechanical simulation for lithium ion batteries across the scales
- (2019) Tobias Hofmann et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Runtime optimization of a memory efficient CG solver for FFT-based homogenization: implementation details and scaling results for linear elasticity
- (2019) Hannes Grimm-Strele et al. COMPUTATIONAL MECHANICS
- A FFT solver for variational phase-field modeling of brittle fracture
- (2019) Yang Chen et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Self-consistent clustering analysis for multiscale modeling at finite strains
- (2019) Cheng Yu et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- FFT-based homogenization of hypoelastic plasticity at finite strains
- (2019) Ran Ma et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- The effective conductivity of strongly nonlinear media: The dilute limit
- (2019) François Willot INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Towards crack paths simulations in media with a random fracture energy
- (2019) Dominique Jeulin INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Fast parallel multidimensional FFT using advanced MPI
- (2019) Lisandro Dalcin et al. JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING
- On the mathematical foundations of the self-consistent clustering analysis for non-linear materials at small strains
- (2019) Matti Schneider COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Eigendecomposition‐based convergence analysis of the Neumann series for laminated composites and discretization error estimation
- (2019) Cédric Bellis et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- DBFFT: A displacement based FFT approach for non-linear homogenization of the mechanical behavior
- (2019) S. Lucarini et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Digital sand core physics: Predicting physical properties of sand cores by simulations on digital microstructures
- (2019) Florian Ettemeyer et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Energy-based comparison between the Fourier-Galerkin method and the finite element method
- (2019) Jaroslav Vondřejc et al. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS
- A simple way to use X-ray micro-tomography to infer elastic properties of heterogeneous materials: application to sedimentary rocks
- (2019) Pierre-Louis Valdenaire et al. JOURNAL OF MATERIALS SCIENCE
- Homogenization-based multiscale analysis for equivalent mechanical properties of nonwoven carbon-fiber fabric composites
- (2019) Haksung Lee et al. Journal of Mechanical Science and Technology
- Full-field polycrystal plasticity simulations of neutron-irradiated austenitic stainless steel: A comparison between FE and FFT-based approaches
- (2019) S. El Shawish et al. JOURNAL OF NUCLEAR MATERIALS
- Statistical Inference Over Persistent Homology Predicts Fluid Flow in Porous Media
- (2019) Chul Moon et al. WATER RESOURCES RESEARCH
- Damage evolution in braided composite tubes under torsion studied by in-situ X-ray computed tomography
- (2019) Yuan Chai et al. COMPOSITES SCIENCE AND TECHNOLOGY
- An FFT-based spectral solver for interface decohesion modelling using a gradient damage approach
- (2019) L. Sharma et al. COMPUTATIONAL MECHANICS
- An inverse modeling approach for predicting filled rubber performance
- (2019) Jiaying Gao et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- An efficient solution scheme for small-strain crystal-elasto-viscoplasticity in a dual framework
- (2019) Daniel Wicht et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- An assessment of numerical techniques to find energy‐minimizing microstructures associated with nonconvex potentials
- (2019) Siddhant Kumar et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- An FFT‐based method for computing weighted minimal surfaces in microstructures with applications to the computational homogenization of brittle fracture
- (2019) Matti Schneider INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- On Quasi‐Newton methods in fast Fourier transform‐based micromechanics
- (2019) Daniel Wicht et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- An upscaling approach for micromechanics based fatigue: from RVEs to specimens and component life prediction
- (2019) Sergio Lucarini et al. INTERNATIONAL JOURNAL OF FRACTURE
- Use of composite voxels in FFT based elastic simulations of hollow glass microspheres/polypropylene composites
- (2019) Romain Charière et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Elastostatic field distributions in polycrystals and cracked media
- (2019) F. Willot et al. PHILOSOPHICAL MAGAZINE
- The implementation of B-splines to Hashin and Shtrikman variational principle based FFT method for the homogenization of composite
- (2019) Fubin Tu et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Upscaling the elastic stiffness of foam concrete as a three-phase composite material
- (2018) M. Ben Youssef et al. CEMENT AND CONCRETE RESEARCH
- Shear and bulk moduli of isotropic porous and cellular alumina ceramics predicted from thermal conductivity via cross-property relations
- (2018) Willi Pabst et al. CERAMICS INTERNATIONAL
- Progressive damage analysis of 3D braided composites using FFT-based method
- (2018) Bing Wang et al. COMPOSITE STRUCTURES
- Fiber orientation interpolation for the multiscale analysis of short fiber reinforced composite parts
- (2018) Jonathan Köbler et al. COMPUTATIONAL MECHANICS
- Two reduction methods for stochastic FEM based homogenization using global basis functions
- (2018) Dmytro Pivovarov et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Model order reduction of nonlinear homogenization problems using a Hashin–Shtrikman type finite element method
- (2018) Stephan Wulfinghoff et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Deformation patterning in finite-strain crystal plasticity by spectral homogenization with application to magnesium
- (2018) A. Vidyasagar et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A framework for FFT-based homogenization on anisotropic lattices
- (2018) Ronny Bergmann et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- Influences of micro-pores and meso-pores on elastic and plastic properties of porous materials
- (2018) Y.J. Cao et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Convergence of iterative methods based on Neumann series for composite materials: Theory and practice
- (2018) Hervé Moulinec et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Conductivity of composites with multiple polygonal aggregates, theoretical estimates and numerical solutions from polarization series
- (2018) Hoang-Long Nguyen et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- FFT based iterative schemes for composites conductors with non-overlapping fibers and Kapitza interface resistance
- (2018) Vincent Monchiet INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Modelling the microstructure and computing effective elastic properties of sand core materials
- (2018) Matti Schneider et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Modeling of Young’s modulus and thermal conductivity evolution of partially sintered alumina ceramics with pore shape changes from concave to convex
- (2018) Tereza Uhlířová et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Young’s modulus and thermal conductivity of closed-cell, open-cell and inverse ceramic foams – model-based predictions, cross-property predictions and numerical calculations
- (2018) Willi Pabst et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Relative Young’s modulus and thermal conductivity of isotropic porous ceramics with randomly oriented spheroidal pores – Model-based relations, cross-property predictions and numerical calculations
- (2018) Willi Pabst et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effective viscoelastic behavior of short fibers composites using virtual DMA experiments
- (2018) Boris Burgarella et al. MECHANICS OF TIME-DEPENDENT MATERIALS
- Generation of 3D representative volume elements for heterogeneous materials: A review
- (2018) Swantje Bargmann et al. PROGRESS IN MATERIALS SCIENCE
- Thermal conductivity and Young's modulus of cubic-cell metamaterials
- (2018) Tereza Uhlířová et al. CERAMICS INTERNATIONAL
- Stochastic modeling of discontinuous dynamic recrystallization at finite strains in hcp metals
- (2018) A.D. Tutcuoglu et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- A two‐scale FE‐FFT approach to nonlinear magneto‐elasticity
- (2018) Matthias Rambausek et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Development of a new consistent discrete Green operator for FFT-based methods to solve heterogeneous problems with eigenstrains
- (2018) Komlavi Sényo Eloh et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography
- (2018) Yang Chen et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A micromechanical model for the secondary creep of elasto-viscoplastic porous materials with two rate-sensitivity exponents: Application to a mixed oxide fuel
- (2018) Kajetan Wojtacki et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Geometric Variational Principles for Computational Homogenization
- (2018) Cédric Bellis et al. JOURNAL OF ELASTICITY
- Conductivity and Young's modulus of porous metamaterials based on Gibson-Ashby cells
- (2018) Tereza Uhlířová et al. SCRIPTA MATERIALIA
- A simple and flexible model order reduction method for FFT-based homogenization problems using a sparse sampling technique
- (2018) Julian Kochmann et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Linear Convergence and Metric Selection for Douglas-Rachford Splitting and ADMM
- (2017) Pontus Giselsson et al. IEEE TRANSACTIONS ON AUTOMATIC CONTROL
- Calculation of cancellous bone elastic properties with the polarization-based FFT iterative scheme
- (2017) Lucas Colabella et al. International Journal for Numerical Methods in Biomedical Engineering
- An algorithmically consistent macroscopic tangent operator for FFT-based computational homogenization
- (2017) Felix Selim Göküzüm et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- A finite element perspective on nonlinear FFT-based micromechanical simulations
- (2017) J. Zeman et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Overall elastic properties of composites from optimal strong contrast expansion
- (2017) Quy-Dong To et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials
- (2017) Karel Matouš et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Tight global linear convergence rate bounds for Douglas–Rachford splitting
- (2017) Pontus Giselsson Journal of Fixed Point Theory and Applications
- Predicting the effective response of bulk polycrystalline ferroelectric ceramics via improved spectral phase field methods
- (2017) A. Vidyasagar et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Different composite voxel methods for the numerical homogenization of heterogeneous inelastic materials with FFT-based techniques
- (2017) Charles Mareau et al. MECHANICS OF MATERIALS
- Prediction of Effective Properties of Porous Carbon Electrodes from a Parametric 3D Random Morphological Model
- (2017) Torben Prill et al. TRANSPORT IN POROUS MEDIA
- Fourier-based strength homogenization of porous media
- (2016) François Bignonnet et al. COMPUTATIONAL MECHANICS
- Two-scale FE–FFT- and phase-field-based computational modeling of bulk microstructural evolution and macroscopic material behavior
- (2016) Julian Kochmann et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Self-consistent clustering analysis: An efficient multi-scale scheme for inelastic heterogeneous materials
- (2016) Zeliang Liu et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A model order reduction method for computational homogenization at finite strains on regular grids using hyperelastic laminates to approximate interfaces
- (2016) Matthias Kabel et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Virtual characterization of MDF fiber network
- (2016) Janis Sliseris et al. European Journal of Wood and Wood Products
- Parameter identification for short fiber-reinforced plastics using optimal experimental design
- (2016) Roland Herzog et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Improved guaranteed computable bounds on homogenized properties of periodic media by the Fourier-Galerkin method with exact integration
- (2016) Jaroslav Vondřejc INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Reconstructing displacements from the solution to the periodic Lippmann-Schwinger equation discretized on a uniform grid
- (2016) Sébastien Brisard INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- FFT-based homogenization for microstructures discretized by linear hexahedral elements
- (2016) Matti Schneider et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Influence of the multiscale distribution of particles on elastic properties of concrete
- (2016) Julie Escoda et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Fast FFT based solver for rate-dependent deformations of composites and nonwovens
- (2016) Sarah Staub et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Thermal fiber orientation tensors for digital paper physics
- (2016) Matti Schneider et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A comparative study on low-memory iterative solvers for FFT-based homogenization of periodic media
- (2016) Nachiketa Mishra et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Numerical implementation of non-local polycrystal plasticity using fast Fourier transforms
- (2016) Ricardo A. Lebensohn et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- On the effective viscosity of a periodic suspension - analysis of primal and dual formulations for Newtonian and non-Newtonian solvents
- (2016) Matti Schneider MATHEMATICAL METHODS IN THE APPLIED SCIENCES
- A numerical study of effective mechanical behaviors of rock like materials based on Fast Fourier Transform
- (2016) M.Y. Li et al. MECHANICS OF MATERIALS
- The Permeability of Boolean Sets of Cylinders
- (2016) F. Willot et al. Oil & Gas Science and Technology-Revue d IFP Energies nouvelles
- A full-field image conversion method for the inverse conductivity problem with internal measurements
- (2016) Cédric Bellis et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Analysis and Design of Optimization Algorithms via Integral Quadratic Constraints
- (2016) Laurent Lessard et al. SIAM JOURNAL ON OPTIMIZATION
- An introduction to continuous optimization for imaging
- (2016) Antonin Chambolle et al. ACTA NUMERICA
- Simulation of residual stress and elastic energy density in thermal barrier coatings using fast Fourier transforms
- (2015) S.P. Donegan et al. ACTA MATERIALIA
- Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization
- (2015) Fabien Bernachy-Barbe et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Fourier-based schemes for computing the mechanical response of composites with accurate local fields
- (2015) François Willot COMPTES RENDUS MECANIQUE
- Mixed boundary conditions for FFT-based homogenization at finite strains
- (2015) Matthias Kabel et al. COMPUTATIONAL MECHANICS
- Combining FFT methods and standard variational principles to compute bounds and estimates for the properties of elastic composites
- (2015) Vincent Monchiet COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Use of composite voxels in FFT-based homogenization
- (2015) Matthias Kabel et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Guaranteed upper–lower bounds on homogenized properties by FFT-based Galerkin method
- (2015) Jaroslav Vondřejc et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Formulation of nonlocal damage models based on spectral methods for application to complex microstructures
- (2015) Martin Boeff et al. ENGINEERING FRACTURE MECHANICS
- Field statistics in linear viscoelastic composites and polycrystals
- (2015) Claudiu Badulescu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Computational homogenization of elasticity on a staggered grid
- (2015) Matti Schneider et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials
- (2015) P. Shanthraj et al. INTERNATIONAL JOURNAL OF PLASTICITY
- On the deformation twinning of Mg AZ31B: A three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model
- (2015) Hamidreza Abdolvand et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Homogenization of linear elastic properties of short-fiber reinforced composites – A comparison of mean field and voxel-based methods
- (2015) Viktor Müller et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Numerical modeling of the thermal expansion of an energetic material
- (2015) Andrey Ambos et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Filtering material properties to improve FFT-based methods for numerical homogenization
- (2015) Lionel Gélébart et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Estimation of fiber orientation and fiber bundles of MDF
- (2015) Janis Sliseris et al. MATERIALS AND STRUCTURES
- Stokes Flow Through a Boolean Model of Spheres: Representative Volume Element
- (2015) B. Abdallah et al. TRANSPORT IN POROUS MEDIA
- On the Inertia Effects on the Darcy Law: Numerical Implementation and Confrontation of Micromechanics-Based Approaches
- (2015) Viet-Thanh To et al. TRANSPORT IN POROUS MEDIA
- Validation of a numerical method based on Fast Fourier Transforms for heterogeneous thermoelastic materials by comparison with analytical solutions
- (2014) B.S. Anglin et al. COMPUTATIONAL MATERIALS SCIENCE
- An incremental–iterative method for modeling damage evolution in voxel-based microstructure models
- (2014) Qi-Zhi Zhu et al. COMPUTATIONAL MECHANICS
- Efficient fixed point and Newton–Krylov solvers for FFT-based homogenization of elasticity at large deformations
- (2014) Matthias Kabel et al. COMPUTATIONAL MECHANICS
- An FFT-based Galerkin method for homogenization of periodic media
- (2014) Jaroslav Vondřejc et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- FFT-based bounds on the permeability of complex microstructures
- (2014) F. Bignonnet et al. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
- Fourier-based schemes with modified Green operator for computing the electrical response of heterogeneous media with accurate local fields
- (2014) François Willot et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Comparison of three accelerated FFT-based schemes for computing the mechanical response of composite materials
- (2014) H. Moulinec et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Effective flow surface of porous materials with two populations of voids under internal pressure: II. Full-field simulations
- (2014) Pierre-Guy Vincent et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Influence of the fiber geometry on the macroscopic elastic and thermal properties
- (2014) Hellen Altendorf et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A numerical spectral approach for solving elasto-static field dislocation and g-disclination mechanics
- (2014) Stéphane Berbenni et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Size effect in through-thickness conductivity of heterogeneous plates
- (2014) H. Le Quang et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Convergence of FFT-based homogenization for strongly heterogeneous media
- (2014) Matti Schneider MATHEMATICAL METHODS IN THE APPLIED SCIENCES
- Numerical prediction of the stiffness and strength of medium density fiberboards
- (2014) Janis Sliseris et al. MECHANICS OF MATERIALS
- A critical comparison of several numerical methods for computing effective properties of highly heterogeneous materials
- (2013) Cyrille F. Dunant et al. ADVANCES IN ENGINEERING SOFTWARE
- Numerical homogenization of nonlinear composites with a polarization-based FFT iterative scheme
- (2013) Vincent Monchiet et al. COMPUTATIONAL MATERIALS SCIENCE
- Non-linear extension of FFT-based methods accelerated by conjugate gradients to evaluate the mechanical behavior of composite materials
- (2013) Lionel Gélébart et al. COMPUTATIONAL MATERIALS SCIENCE
- A multiscale approach for modeling progressive damage of composite materials using fast Fourier transforms
- (2013) J. Spahn et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Asymptotic homogenization of periodic thermo-magneto-electro-elastic heterogeneous media
- (2013) Lázaro M. Sixto-Camacho et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- A two-scale micromechanical model for aluminium foam based on results from nanoindentation
- (2013) Jiří Němeček et al. COMPUTERS & STRUCTURES
- A polarization-based fast numerical method for computing the effective conductivity of composites
- (2013) Vincent Monchiet et al. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW
- Microstructure-induced hotspots in the thermal and elastic responses of granular media
- (2013) François Willot et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Optical properties of deposit models for paints: full-fields FFT computations and representative volume element
- (2013) D.F. Azzimonti et al. JOURNAL OF MODERN OPTICS
- Micromechanical analysis of heterogeneous structural materials
- (2012) Jiří Němeček et al. CEMENT & CONCRETE COMPOSITES
- Combining Galerkin approximation techniques with the principle of Hashin and Shtrikman to derive a new FFT-based numerical method for the homogenization of composites
- (2012) S. Brisard et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Digital rock physics benchmarks—part II: Computing effective properties
- (2012) Heiko Andrä et al. COMPUTERS & GEOSCIENCES
- A Fourier based numerical method for computing the dynamic permeability of periodic porous media
- (2012) Trung-Kien Nguyen et al. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS
- A fast method for solving microstructural problems defined by digital images: a space Lippmann-Schwinger scheme
- (2012) Julien Yvonnet INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- A damage model for crack prediction in brittle and quasi-brittle materials solved by the FFT method
- (2012) Jia Li et al. INTERNATIONAL JOURNAL OF FRACTURE
- A spectral method solution to crystal elasto-viscoplasticity at finite strains
- (2012) P. Eisenlohr et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Three-dimensional electron backscattered diffraction analysis of deformation in MgO micropillars
- (2011) S. Korte et al. ACTA MATERIALIA
- An optimal variance estimate in stochastic homogenization of discrete elliptic equations
- (2011) Antoine Gloria et al. ANNALS OF PROBABILITY
- Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image
- (2011) J. Escoda et al. CEMENT AND CONCRETE RESEARCH
- A non-local fracture model for composite laminates and numerical simulations by using the FFT method
- (2011) Jia Li et al. COMPOSITES PART B-ENGINEERING
- ELASTIC AND ELECTRICAL BEHAVIOR OF SOME RANDOMMULTISCALE HIGHLY-CONTRASTED COMPOSITES
- (2011) Francois Willot et al. International Journal for Multiscale Computational Engineering
- LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS
- (2011) Aurelie Jean et al. International Journal for Multiscale Computational Engineering
- A polarization-based FFT iterative scheme for computing the effective properties of elastic composites with arbitrary contrast
- (2011) V. Monchiet et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
- (2011) Ricardo A. Lebensohn et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A micromechanics-based approach for the derivation of constitutive elastic coefficients of strain-gradient media
- (2011) Thu-Huong Tran et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Fast fourier transform-based modeling for the determination of micromechanical fields in polycrystals
- (2011) Ricardo A. Lebensohn et al. JOM
- Anderson Acceleration for Fixed-Point Iterations
- (2011) Homer F. Walker et al. SIAM JOURNAL ON NUMERICAL ANALYSIS
- An efficient multigrid method for the simulation of high-resolution elastic solids
- (2010) Yongning Zhu et al. ACM TRANSACTIONS ON GRAPHICS
- FFT-based methods for the mechanics of composites: A general variational framework
- (2010) S. Brisard et al. COMPUTATIONAL MATERIALS SCIENCE
- Accelerating a FFT-based solver for numerical homogenization of periodic media by conjugate gradients
- (2010) Jan Zeman et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Response of multiferroic composites inferred from a fast-Fourier-transform-based numerical scheme
- (2010) Renald Brenner et al. Smart Materials and Structures
- Simulation of damage evolution in composites: A phase-field model
- (2009) S.B. Biner et al. ACTA MATERIALIA
- Identification of viscoelastic C-S-H behavior in mature cement paste by FFT-based homogenization method
- (2009) Vít Šmilauer et al. CEMENT AND CONCRETE RESEARCH
- A FFT-based method to compute the permeability induced by a Stokes slip flow through a porous medium
- (2009) Vincent Monchiet et al. COMPTES RENDUS MECANIQUE
- An image morphing method for 3D reconstruction and FE-analysis of pore networks in thermal spray coatings
- (2009) T. Wiederkehr et al. COMPUTATIONAL MATERIALS SCIENCE
- Infinite-contrast periodic composites with strongly nonlinear behavior: Effective-medium theory versus full-field simulations
- (2009) M.I. Idiart et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Multi-scale computational homogenization: Trends and challenges
- (2009) M.G.D. Geers et al. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS
- Numerical computation of the response of piezoelectric composites using Fourier transform
- (2009) R. Brenner PHYSICAL REVIEW B
- Modeling the effective elastic behavior of composites: a mixed Finite Element and homogenisation approach
- (2008) Charles Toulemonde et al. COMPTES RENDUS MECANIQUE
- An accelerated FFT algorithm for thermoelastic and non-linear composites
- (2008) V. Vinogradov et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Elastic behavior of composites containing Boolean random sets of inhomogeneities
- (2008) François Willot et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- The Variational Approach to Fracture
- (2008) Blaise Bourdin et al. JOURNAL OF ELASTICITY
- Three-Dimensional Orientation Microscopy in a Focused Ion Beam–Scanning Electron Microscope: A New Dimension of Microstructure Characterization
- (2008) S. Zaefferer et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Two classes of multisecant methods for nonlinear acceleration
- (2008) Haw-ren Fang et al. NUMERICAL LINEAR ALGEBRA WITH APPLICATIONS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now