Effect of Filling on Failure Characteristics of Diorite with Double Rectangular Holes Under Coupled Static-Dynamic Loads

The effect of infilling on mechanical response and crack behavior of pre-stressed rock with double rectangular holes under dynamic load was investigated through a series of coupled static-dynamic loading tests on diorite specimens in three different filling states, i.e., no infilling, single infilling and double infilling, using a modified split Hopkinson pressure bar. The deformation, damage and fracture process of specimens were recorded and analyzed by low-speed and high-speed cameras with digital image correlation method. Test results reveal that under the same dynamic load, the strength of specimens increases first and then decreases with the increase of axial static pre-stress, and reaches the maximum under 25% UCS due to crack closure. The strengthening effect of double infilling on strength is much more significant than that of single infilling and increases with the pre-stress. Observations show that with the increase of pre-stress, the degrees of damage and strain localization of specimens increase, and the superficial damage on the free surface of sidewalls are more severe. The effect of infilling is significant on the crack initiation and propagation, especially on the inhibition of sidewall spalling, rock ejection and the axial displacement failure of rock septum between holes. With the increase of pre-stress, the failure pattern and the crack coalescence mode change from obvious tensile to shear, and the coalescence position changes from the inside to outside of the septum area. However, the change of filling state has little effect on the coalescence mode, only on the coalescence position.

Automated summary

The study investigates the impact of infilling on the mechanical response and crack behavior of pre-stressed rock with double rectangular holes under dynamic load. Results show that double infilling significantly enhances the strength of the specimens compared to single infilling.