标题
Aluminium alloys as structural material: A review of research
作者
关键词
Aluminium alloys, Structural response, Experiments, Numerical investigation, Design guidelines
出版物
ENGINEERING STRUCTURES
Volume 227, Issue -, Pages 111372
出版商
Elsevier BV
发表日期
2020-10-30
DOI
10.1016/j.engstruct.2020.111372
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Web crippling of aluminium alloy channel sections with flanges restrained
- (2020) Feng Zhou et al. THIN-WALLED STRUCTURES
- Flexural capacity of perforated aluminium CHS tubes–An experimental study
- (2020) Ran Feng et al. Structures
- Material properties of normal and high strength aluminium alloys at elevated temperatures
- (2019) Mei-Ni Su et al. THIN-WALLED STRUCTURES
- Numerical study and design of aluminium alloy channel section columns with welds
- (2019) Ji-Hua Zhu et al. THIN-WALLED STRUCTURES
- Application of structural topology optimisation in aluminium cross-sectional design
- (2019) Konstantinos Daniel Tsavdaridis et al. THIN-WALLED STRUCTURES
- Analytical behavior of concrete-filled aluminum tubular stub columns under axial compression
- (2019) Fa-Cheng Wang et al. THIN-WALLED STRUCTURES
- Experimental study of aluminium lipped channel sections subjected to web crippling under two flange load cases
- (2019) Husam Alsanat et al. THIN-WALLED STRUCTURES
- Numerical investigation and design of perforated aluminium alloy SHS and RHS columns
- (2019) Ran Feng et al. ENGINEERING STRUCTURES
- Mechanical properties and residual stresses in cold-rolled aluminium channel sections
- (2019) Le Anh Thi Huynh et al. ENGINEERING STRUCTURES
- Flexural behavior of double- and single-layer aluminum alloy gusset-type joints
- (2019) Hongbo Liu et al. THIN-WALLED STRUCTURES
- Finite-element analysis and design of aluminium alloy CHSs with circular through-holes in bending
- (2019) Ran Feng et al. THIN-WALLED STRUCTURES
- Web crippling behaviour and design of aluminium lipped channel sections under two flange loading conditions
- (2019) Husam Alsanat et al. THIN-WALLED STRUCTURES
- Investigation of aluminium bolted joint (HBJ) system behavior
- (2019) Guy Oyéniran ADEOTI et al. THIN-WALLED STRUCTURES
- Member moment capacity of complex-shaped aluminium mullions under wind suction loading
- (2019) Sivakumar Kesawan et al. THIN-WALLED STRUCTURES
- Ultimate behaviour of high-yielding low-hardening aluminium alloy I-beams
- (2019) Rosario Montuori et al. THIN-WALLED STRUCTURES
- Constitutive model of structural aluminum alloy under cyclic loading
- (2018) Xiaonong Guo et al. CONSTRUCTION AND BUILDING MATERIALS
- Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes
- (2018) Yu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Tests and parametric analysis of aluminum alloy bolted joints of different material types
- (2018) Z.X. Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Bearing capacity of aluminum alloy members under eccentric compression at elevated temperatures
- (2018) Shaojun Zhu et al. THIN-WALLED STRUCTURES
- Experimental study on hysteretic behavior of aluminum alloy gusset joints
- (2018) Xiaonong Guo et al. THIN-WALLED STRUCTURES
- Numerical Slenderness Approach for design of complex aluminum extrusions subjected to flexural loading
- (2018) Yongwook Kim et al. THIN-WALLED STRUCTURES
- Experimental investigation on bending and shear performance of two-way aluminum alloy gusset joints
- (2018) Mingzhe Shi et al. THIN-WALLED STRUCTURES
- Design of CFRP-strengthened aluminium alloy tubular sections subjected to web crippling
- (2018) S.M. Zahurul Islam et al. THIN-WALLED STRUCTURES
- Buckling behaviour of aluminium alloy columns under fire conditions
- (2018) Shouchao Jiang et al. THIN-WALLED STRUCTURES
- Study on out-of-plane flexural behavior of aluminum alloy gusset joints at elevated temperatures
- (2018) Xiaonong Guo et al. THIN-WALLED STRUCTURES
- Design of aluminium alloy stocky hollow sections subjected to concentrated transverse loads
- (2018) Mei-Ni Su et al. THIN-WALLED STRUCTURES
- Tests of perforated aluminium alloy SHSs and RHSs under axial compression
- (2018) Ran Feng et al. THIN-WALLED STRUCTURES
- Experimental investigation and parametric analysis on overall buckling behavior of large-section aluminum alloy columns under axial compression
- (2018) Z.X. Wang et al. THIN-WALLED STRUCTURES
- Section moment capacity tests of complex-shaped aluminium mullions
- (2018) Sivakumar Kesawan et al. THIN-WALLED STRUCTURES
- Concrete-filled double-skin aluminum circular hollow section stub columns
- (2018) Feng Zhou et al. THIN-WALLED STRUCTURES
- Stability analysis of an aluminum alloy assembly column in a modular support structure
- (2018) Lin He et al. THIN-WALLED STRUCTURES
- Ultimate resistance and rotation capacity of low yielding high hardening aluminium alloy beams under non-uniform bending
- (2018) Vincenzo Piluso et al. THIN-WALLED STRUCTURES
- Behaviour of aluminium alloy plain and lipped channel columns
- (2018) Ji-Hua Zhu et al. THIN-WALLED STRUCTURES
- Flexural behaviour of concrete-filled aluminium alloy thin-walled SHS and RHS tubes
- (2017) Ran Feng et al. ENGINEERING STRUCTURES
- Plastic collapse of hardening spatial aluminium frames: A novel shakedown-based approach
- (2017) A.T. Ampatzis et al. ENGINEERING STRUCTURES
- Classification of aluminium alloy cross-sections
- (2017) Mei-Ni Su et al. ENGINEERING STRUCTURES
- Ultimate behaviour of RHS temper T6 aluminium alloy beams subjected to non-uniform bending: Parametric analysis
- (2017) Paolo Castaldo et al. THIN-WALLED STRUCTURES
- Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions
- (2017) Y.Q. Wang et al. THIN-WALLED STRUCTURES
- The continuous strength method for the design of aluminium alloy structural elements
- (2016) Mei-Ni Su et al. ENGINEERING STRUCTURES
- Flexural response of aluminium alloy SHS and RHS with internal stiffeners
- (2016) Mei-Ni Su et al. ENGINEERING STRUCTURES
- Perforated metal shear panels as bracing devices of seismic-resistant structures
- (2016) A. Formisano et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Local buckling of aluminium and steel plates with multiple holes
- (2016) Irene C. Scheperboer et al. THIN-WALLED STRUCTURES
- Interacted buckling failure of thin-walled irregular-shaped aluminum alloy column under axial compression
- (2016) Yicun Chang et al. THIN-WALLED STRUCTURES
- Experimental study and parametric analysis on the stability behavior of 7A04 high-strength aluminum alloy angle columns under axial compression
- (2016) Y.Q. Wang et al. THIN-WALLED STRUCTURES
- Buckling behaviors of thin-walled aluminum alloy column with irregular-shaped cross section under axial compression in a fire
- (2016) Mei Liu et al. THIN-WALLED STRUCTURES
- Experimental investigation on the post-fire mechanical properties of structural aluminum alloys 6061-T6 and 7075-T73
- (2016) Zhihua Chen et al. THIN-WALLED STRUCTURES
- Tests of aluminium alloy CHS columns with circular openings
- (2016) Ran Feng et al. THIN-WALLED STRUCTURES
- Estimation of ultimate strength in single shear bolted connections with aluminum alloys (6061-T6)
- (2016) YongHyun Cho et al. THIN-WALLED STRUCTURES
- Test and design method for the buckling behaviors of 6082-T6 aluminum alloy columns with box-type and L-type sections under eccentric compression
- (2016) Yuanzheng Zhao et al. THIN-WALLED STRUCTURES
- Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
- (2016) Y.Q. Wang et al. THIN-WALLED STRUCTURES
- Application of the Component Method to Aluminum Alloy Gusset Joints
- (2015) Xiaonong Guo et al. ADVANCES IN STRUCTURAL ENGINEERING
- Buckling behaviors of section aluminum alloy columns under axial compression
- (2015) Mei Liu et al. ENGINEERING STRUCTURES
- Strength of an Aluminum Column Web in Tension
- (2015) Giuseppe Brando et al. JOURNAL OF STRUCTURAL ENGINEERING
- Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings
- (2015) Ran Feng et al. JOURNAL OF STRUCTURAL ENGINEERING
- Experimental investigation on local buckling behaviors of stiffened closed-section thin-walled aluminum alloy columns under compression
- (2015) Mei Liu et al. THIN-WALLED STRUCTURES
- Stability of 6082-T6 aluminium alloy columns with H-section and rectangular hollow sections
- (2015) Guy Oyeniran Adeoti et al. THIN-WALLED STRUCTURES
- Local buckling and postbuckling strength of extruded aluminium alloy stub columns with slender I-sections
- (2015) H.X. Yuan et al. THIN-WALLED STRUCTURES
- Aluminum tubular sections subjected to web crippling
- (2015) Yu Chen et al. THIN-WALLED STRUCTURES
- Experimental investigation on the stability of aluminium alloy 6082 circular tubes in axial compression
- (2015) Yujin Wang et al. THIN-WALLED STRUCTURES
- Practical strain-hardening material properties for use in deformation-based structural steel design
- (2015) A.S.J. Foster et al. THIN-WALLED STRUCTURES
- Experimental investigation on the semi-rigid behaviour of aluminium alloy gusset joints
- (2015) Xiaonong Guo et al. THIN-WALLED STRUCTURES
- Strength of an Aluminum Column Web in Tension
- (2015) Giuseppe Brando et al. JOURNAL OF STRUCTURAL ENGINEERING
- Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings
- (2015) Ran Feng et al. JOURNAL OF STRUCTURAL ENGINEERING
- Deformation-based design of aluminium alloy beams
- (2014) Mei-Ni Su et al. ENGINEERING STRUCTURES
- Testing and Design of Aluminum Alloy Cross Sections in Compression
- (2014) Mei-Ni Su et al. JOURNAL OF STRUCTURAL ENGINEERING
- Effective length of aluminium T-stub connections by parametric analysis
- (2012) Gianfranco De Matteis et al. ENGINEERING STRUCTURES
- Global Restraint in Ultra-Lightweight Buckling-Restrained Braces
- (2012) Peter Dusicka et al. JOURNAL OF COMPOSITES FOR CONSTRUCTION
- Web crippling of aluminium tubular structural members strengthened by CFRP
- (2012) S.M. Zahurul Islam et al. THIN-WALLED STRUCTURES
- Pure aluminium: An innovative material for structural applications in seismic engineering
- (2011) Gianfranco De Matteis et al. CONSTRUCTION AND BUILDING MATERIALS
- Design formulations for non-welded and welded aluminium columns using Continuous Strength Method
- (2011) Mahmud Ashraf et al. ENGINEERING STRUCTURES
- FRP strengthened aluminium tubular sections subjected to web crippling
- (2011) S.M. Zahurul Islam et al. THIN-WALLED STRUCTURES
- Design rules for web crippling of CFRP strengthened aluminium rectangular hollow sections
- (2011) C. Wu et al. THIN-WALLED STRUCTURES
- Lateral-torsional buckling resistance of aluminium I-beams
- (2011) Y.Q. Wang et al. THIN-WALLED STRUCTURES
- Numerical analysis and design of concrete-filled aluminum circular hollow section columns
- (2011) Feng Zhou et al. THIN-WALLED STRUCTURES
- Hysteretic behaviour of bracing-type pure aluminium shear panels by experimental tests
- (2010) Gianfranco De Matteis et al. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS
- Web crippling of aluminium tubes with perforated webs
- (2010) Feng Zhou et al. ENGINEERING STRUCTURES
- Local Buckling of Aluminum Alloy Angles under Uniform Compression
- (2010) Federico M. Mazzolani et al. JOURNAL OF STRUCTURAL ENGINEERING
- Structural Analysis of Compression Deformation and Failure of Aluminum in Fire
- (2010) S. Feih et al. JOURNAL OF STRUCTURAL ENGINEERING
- Direct Strength Method for Design of Cold-Formed Steel Columns with Holes
- (2010) C. D. Moen et al. JOURNAL OF STRUCTURAL ENGINEERING
- Larson–Miller Failure Modeling of Aluminum in Fire
- (2010) E. Kandare et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ultimate flexural strength of aluminum sections
- (2010) Y. Kim et al. THIN-WALLED STRUCTURES
- Behaviour of welded aluminium T-stub joints under monotonic loading
- (2009) G. De Matteis et al. COMPUTERS & STRUCTURES
- Flexural buckling of fire exposed aluminium columns
- (2009) J. Maljaars et al. FIRE SAFETY JOURNAL
- Tests and Design of Aluminum Tubular Sections Subjected to Concentrated Bearing Load
- (2009) Feng Zhou et al. JOURNAL OF STRUCTURAL ENGINEERING
- Design of Aluminum Alloy Flexural Members Using Direct Strength Method
- (2009) Ji-Hua Zhu et al. JOURNAL OF STRUCTURAL ENGINEERING
- Local Buckling of Fire-Exposed Aluminum Members: New Design Model
- (2009) J. Maljaars et al. JOURNAL OF STRUCTURAL ENGINEERING
- Creep-based life prediction modelling of aluminium in fire
- (2009) E. Kandare et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Local buckling of aluminium structures exposed to fire. Part 1: Tests
- (2009) J. Maljaars et al. THIN-WALLED STRUCTURES
- Concrete-filled aluminum circular hollow section column tests
- (2009) Feng Zhou et al. THIN-WALLED STRUCTURES
- Modeling of Residual Stresses in Structural Stainless Steel Sections
- (2008) L. Gardner et al. JOURNAL OF STRUCTURAL ENGINEERING
- Constitutive Model for Aluminum Alloys Exposed to Fire Conditions
- (2008) J. Maljaars et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Numerical investigation and design of aluminum alloy circular hollow section columns
- (2008) Ji-Hua Zhu et al. THIN-WALLED STRUCTURES
- Prediction of residual stresses and strains in cold-formed steel members
- (2008) Cristopher D. Moen et al. THIN-WALLED STRUCTURES
- Tests of concrete-filled aluminum stub columns
- (2008) Feng Zhou et al. THIN-WALLED STRUCTURES
- Local buckling of aluminium structures exposed to fire
- (2008) J. Maljaars et al. THIN-WALLED STRUCTURES
- Aluminum tubular sections subjected to web crippling—Part I:
- (2007) Feng Zhou et al. THIN-WALLED STRUCTURES
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now