Laser induced graphene interlaminar reinforcement for tough carbon fiber/epoxy composites
出版年份 2020 全文链接
标题
Laser induced graphene interlaminar reinforcement for tough carbon fiber/epoxy composites
作者
关键词
Carbon fiber reinforced composites, Laser induced graphene, Transfer printing, Fracture toughness
出版物
COMPOSITES SCIENCE AND TECHNOLOGY
Volume 201, Issue -, Pages 108493
出版商
Elsevier BV
发表日期
2020-10-02
DOI
10.1016/j.compscitech.2020.108493
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Interlaminar toughening of unidirectional CFRP with multilayers graphene and MWCNTs for Mode Ⅱ fracture
- (2020) Bin Liu et al. COMPOSITE STRUCTURES
- Enhancement of interlaminar fracture toughness in textile-reinforced epoxy composites with polyamide 6/graphene oxide interlaminar toughening tackifier
- (2020) Xiaoran Zhao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Direct growth of thermally reduced graphene oxide on carbon fiber for enhanced mechanical strength
- (2020) Beom-Gon Cho et al. COMPOSITES PART B-ENGINEERING
- Laser-Induced Graphene Composites as Multifunctional Surfaces
- (2019) Duy Xuan Luong et al. ACS Nano
- Enhancing the fracture toughness of hierarchical composites through amino‒functionalised carbon nanotube webs
- (2019) Andrés Nistal et al. COMPOSITES PART B-ENGINEERING
- Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups
- (2019) Pavan Kumar Gangineni et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental investigation on graphene oxides coated carbon fibre/epoxy hybrid composites: Mechanical and electrical properties
- (2019) Lokasani Bhanuprakash et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils
- (2019) Yunfu Ou et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Reinforcing carbon fiber epoxy composites with triazine derivatives functionalized graphene oxide modified sizing agent
- (2019) Lichun Ma et al. COMPOSITES PART B-ENGINEERING
- Flexible, quickly responsive and highly efficient E-heating carbon nanotube film
- (2019) Mohamed Amine Aouraghe et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture
- (2019) Bin Liu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Flexural strength enhancement in carbon-fiber epoxy composites through graphene nano-platelets coating on fibers
- (2019) Alok K. Srivastava et al. COMPOSITES PART B-ENGINEERING
- Laser-induced graphene fibers
- (2018) Luong Xuan Duy et al. CARBON
- Influence of matrix ductility and toughness on strain energy release rate and failure behavior of woven-ply reinforced thermoplastic structures at high temperature
- (2018) B. Vieille et al. COMPOSITES PART B-ENGINEERING
- Effects of hydrazine reduced graphene oxide on the inter-laminar fracture toughness of woven carbon fiber/epoxy composite
- (2018) Nitai Chandra Adak et al. COMPOSITES PART B-ENGINEERING
- Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix
- (2018) Somen K. Bhudolia et al. COMPOSITES PART B-ENGINEERING
- Graphene oxide incorporated functional materials: A review
- (2018) Hassan Ahmad et al. COMPOSITES PART B-ENGINEERING
- Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics
- (2018) Feng Xu et al. CONSTRUCTION AND BUILDING MATERIALS
- Laser-Induced Graphene: From Discovery to Translation
- (2018) Ruquan Ye et al. ADVANCED MATERIALS
- Enhanced fracture toughness of hierarchical carbon nanotube reinforced carbon fibre epoxy composites with engineered matrix microstructure
- (2018) M. Shukur Zainol Abidin et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Applying a potential difference to minimise damage to carbon fibres during carbon nanotube grafting by chemical vapour deposition
- (2017) David B Anthony et al. NANOTECHNOLOGY
- Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending
- (2016) P. Turner et al. COMPOSITE STRUCTURES
- Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites
- (2016) Bo Gao et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Development of sizing-free multi-functional carbon fibre nanocomposites
- (2016) T.R. Pozegic et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Investigation of dynamic mode I matrix crack-fiber bundle interaction in composites using caustics
- (2016) Wenfeng Hao et al. COMPOSITES PART B-ENGINEERING
- Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites
- (2016) Abhishek K. Pathak et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
- (2016) Lode Daelemans et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications
- (2016) N. G. Ozdemir et al. Express Polymer Letters
- Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf
- (2015) Huiming Ning et al. CARBON
- 3D network graphene interlayer for excellent interlaminar toughness and strength in fiber reinforced composites
- (2015) Jingjing Jia et al. CARBON
- The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates
- (2015) Jin-hua Han et al. CARBON
- Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg
- (2015) Han Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase
- (2015) Wenzhen Qin et al. COMPOSITES PART B-ENGINEERING
- On the interlaminar fracture toughness of carbon fiber composites enhanced with graphene nano-species
- (2015) C. Kostagiannakopoulou et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils
- (2015) Lode Daelemans et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Influence of graphene nanoplatelets on modes I, II and III interlaminar fracture toughness of fiber-reinforced polymer composites
- (2015) B. Ahmadi-Moghadam et al. ENGINEERING FRACTURE MECHANICS
- Interlaminar Fracture Toughness of CFRP Laminates Incorporating Multi-Walled Carbon Nanotubes
- (2015) Elisa Borowski et al. Polymers
- Delamination propagation analysis in tufted carbon fibre-reinforced plastic composites subjected to high-velocity impact
- (2014) P Deconinck et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Laser-induced porous graphene films from commercial polymers
- (2014) Jian Lin et al. Nature Communications
- Mechanical Property and Structure of Covalent Functionalised Graphene/Epoxy Nanocomposites
- (2014) Minoo Naebe et al. Scientific Reports
- Circumventing the Mechanochemical Origins of Strength Loss in the Synthesis of Hierarchical Carbon Fibers
- (2013) Stephen A. Steiner et al. ACS Applied Materials & Interfaces
- The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
- (2013) Long-Cheng Tang et al. CARBON
- Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties
- (2012) Qi An et al. CARBON
- Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers
- (2012) Shafi Ullah Khan et al. CARBON
- Experimental assessment of the damage tolerance of z-pinned T-stiffened composite panels
- (2012) T.M. Koh et al. COMPOSITES PART B-ENGINEERING
- Interlaminar fracture toughness of composite laminates with CNT-enhanced nonwoven carbon tissue interleave
- (2012) Seung-Hwan Lee et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube–epoxy composite
- (2012) M. Tehrani et al. COMPOSITES SCIENCE AND TECHNOLOGY
- The role of delamination in failure of fibre-reinforced composites
- (2012) M. R. Wisnom PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing
- (2012) F.L. Shan et al. POLYMER COMPOSITES
- Mode I interlaminar fracture toughness of Nylon 66 nanofibrilmat interleaved carbon/epoxy laminates
- (2011) Shay Hamer et al. POLYMER COMPOSITES
- Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic
- (2011) I. De Baere et al. POLYMER TESTING
- Toughening of a Carbon-Fibre Composite Using Electrospun Poly(Hydroxyether of Bisphenol A) Nanofibrous Membranes Through Inverse Phase Separation and Inter-Domain Etherification
- (2011) Kevin Magniez et al. Materials
- Electrospun nanofibre toughened carbon/epoxy composites: Effects of polyetherketone cardo (PEK-C) nanofibre diameter and interlayer thickness
- (2010) Jin Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Polymer Nanofabric Interleaved Composite Laminates
- (2009) Kunigal Shivakumar et al. AIAA JOURNAL
- Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites
- (2009) A. Godara et al. CARBON
- Carbon nanotube grafted silica fibres: Characterising the interface at the single fibre level
- (2009) Hui Qian et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Graphene: Status and Prospects
- (2009) A. K. Geim SCIENCE
- Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes
- (2008) K.L. Kepple et al. CARBON
- Joining prepreg composite interfaces with aligned carbon nanotubes
- (2008) Enrique J. Garcia et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic properties
- (2008) J.L. Abot et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Hierarchical composites of carbon nanotubes on carbon fiber: Influence of growth condition on fiber tensile properties
- (2008) Qiuhong Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites
- (2008) A. Tugrul Seyhan et al. ENGINEERING FRACTURE MECHANICS
- Improvement of damage resistance in laminated composites with electrospun nano-interlayers
- (2007) Sangwook Sihn et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mode I and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayer
- (2007) Masahiro Arai et al. COMPOSITES SCIENCE AND TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started